Record Or Report Editing Of Cells
Dec 15, 2006
I have a need to determine in VBA if a cell has been deleted or edited. I need to perform lots of work and form entries on edited cells. I would like to just ignore deleted cells. Presently, I'm using
If Workbook_SheetChange not Worksheet Change
and loop through each cell to determine it's state and thereby its affect on my workflow.
View 4 Replies
ADVERTISEMENT
Jun 2, 2014
i have an excel database regarding about 1000 different schemes having the details of their initiation date, budget allocated , up to date expenditure, this month expenditure and many others too. this is a shared workbook and relevant officers enter their data in their relevant columns and rows. the file is shared. now i want that any changes done by mr. A, for eg. at record No. 09 could be intimated to Mr. B who is working at record No. 560. may be via msg box or any other source.
View 1 Replies
View Related
May 26, 2009
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
View 6 Replies
View Related
Jan 31, 2014
1.I need to protect certain locked cells from editing and allow certain unlocked cells to be changed on multiple worksheets.
2.When all of the changes are made to the unlocked cells, I need to password protect the entire workbook (except one worksheet) from any changes. (i.e. Prevent even the unlocked cells from being edited)
3.I also need a password to un-protect the workbook and return it to the state described in # 1. above .
View 1 Replies
View Related
Oct 3, 2008
I have some VBA code in an Access DB that opens an Excel spreadsheet at a specific workbook, and then performs some formatting on the sheet, before saving the changes and closing the workbook.
The first time i run the sub it works perfectly. If i then try and run it again i get a run-time error 91 message (Object variable or With Block variable not set). This happens every subsequent time i try and run the code until i manually reset.
The error message is always at the same point. Here's the
I've put ***ERROR MESSAGE HERE*** at the point in the code the error seems to be occuring
View 2 Replies
View Related
Nov 29, 2012
I am attempting to print each letter of a string in a specified cell individually in different cells. For example, if I input the word "Hello" in cell B1, it would automatically print "H" in A1, "e" in A2, "l" in A3, etc.
I currently have this;
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Count As Integer
Dim Explosion As Integer
Dim Kaboom
Dim EndCounter As Integer
Dim StrTarg
Dim PLV
[Code]...
However, it does not seem to loop. It simply prints the first letter of the string inputed (In cell K3 in my case), into cell A1, and then stops. Surely it should continue to loop around untill Count is equal to the length of the string in K2.
View 4 Replies
View Related
Aug 6, 2009
i have a list of about 20,000 phone numbers that I need to edit.
all start
01 123456
01 123457
01 123458 etc
I am trying to create a macro that will change them to
+001123456
+001123457
+001123458 Etc
However, no matter what I try it always comes out as
+001123456
+001123456
+001123456
F2 Copy and paste is going to take me forever, and I am sure that there must be a quicker way to do this.
this is my first time creating macros so am completly lost.
I want to keep the text that is in the cell that I am editing, just add the country code and delete the space.
View 9 Replies
View Related
May 25, 2007
I seek advice on using the value of NOW() as a record ID in an address book program. Question #1: Do Excel developers often use a record ID? Question #2: What record ID schemes are fequently employed besides date/time? I have decided to create an Excel address book as an exercise to increase my knowledge of VBA, and also as a useful application for work.
I realize that a record ID is not essential in Excel in the way that it is essential in Access, but I feel the need to have some unique ID associated with each address, so that I may have different worksheets, with data related to a given Contact, sort and manipulate it, if necessary, but have the record ID as a way to restore the relationship of rows to a given Contact, and also, as a handy way to examine the data in the date/time sequence in which it was entered. I have experimented with the following code, to assure myself that I can access the number returned by the NOW() function, manipulate it as a string, and format in various ways if necessary.
Dim n As Double
n = Now()
sn = Str(n)
p = InStr(sn, ".")
first = Left(sn, (p - 1))
l = Len(sn)
d = l - p
S = Mid(sn, (p + 1), d)....................
View 2 Replies
View Related
Mar 16, 2014
I am creating an asset management sheet. For the formula I am trying to work out there uses 3 fields : ID, start date, and end date.
What I want to do is be able to show if the ID is duplicated within another record with an overlapping date. So an item is flagged if it is in the list within the same dates as another record. I tried a few countif formulas but with no success.. I may just be approaching the problem incorrectly though.
View 1 Replies
View Related
Mar 9, 2008
I currently have numerous workbooks with linked cells to a master workbook, but the linked cells dont appear to carry over or retain the formating from the master workbook (e.g. font style, bold, underlined, font color, cell color). I make changes quite often to the master workbook and would like the changes carried over to the other workbooks. Does anyone have a script where it would automatically carry over the font formatting? I hope this is understandable.
View 4 Replies
View Related
Aug 30, 2013
I have two worksheets in my report cards:
1) Data - the students are listed in Column A, math scores in Column B, reading scores in Column C and science scores in Column D. The grades of 300 students are entered in this sheet.
Student
Math
Reading
Science
Jimmy
75
84
100
[code].....
2) Report Card template - This is the report card that needs to be generated for each student. It's pulling the student name and grades from the Data worksheet.
Student Name
=Data!$A2
Math
=Data!$B2
Reading
=Data!$C2
Science
=Data!$D2
How do I create worksheets (report cards) for additional students? I have 300 students in the school. I need the next worksheet to reference Data!$A3. I know how to cut and paste the report card template and then edit =Data!A2 to be =Data!A3 to create a report card for Sally. How do I create the 300 report cards I need?
I've been teaching for 13 years. I can create a report card for each student in my class and edit each worksheet individually for each student. Now I've been asked to do this for the whole school and I don't know how to create the other 299 sheets I need.
View 1 Replies
View Related
Apr 5, 2009
The spreadsheet i am working on requires mileage between last trip and previous trip.
Unfortunately there will be blank cells between as shown below ...
View 9 Replies
View Related
Mar 20, 2009
I'm trying to find a macro that will run allowing the user to select a 'starting record number' and a 'finishing record number' when printing.
I have a spreadsheet that feeds from a master list in excel, from over 5000 records.
I need to print the s'sheet with any given indivdual record's information at any given time.
Individual prints are fine. However if I wanted to print from record number 1500 to record number 3000 it would take me all day.
Is there a way I can set up a macro so an option form pops up? allowing selection of "From record" and "to Record" ?
View 13 Replies
View Related
Jul 2, 2008
How do you create a macro to copy the information from my weekly reports to a monthly report and be able to update automatically. If you had 4 worksheets (for each week of the month) and 1 mastersheet for the whole month in a workbook. All titles are the same and If you needed to copy all the data that is in the columns, say, A through I, starting with row 4 to however many rows are in a given week. The reports can be made up of numicerial values, text and dates. Let me know if more information is needed or an example worksheet.
View 4 Replies
View Related
Mar 24, 2008
On worksheet1 I have the following
joe | apple
joe | pear
joe | lettuce
joe | orange
tom| apple
tom| lettuce
abe| apple
abe| orange
abe| lemon
On worksheet2 I would like
apple | 3
pear | 1
lettuce | 2
orange | 2
lemon | 1
View 10 Replies
View Related
Sep 3, 2009
The code below is supposed to find blank cells in column E on sheet3, copy some data from adjacent cells, create a string from that data and paste on sheet4 in Column J. I get duplicate data and or most blank cells? What the heck did I write.
View 4 Replies
View Related
May 6, 2006
Below is my code to create a pivot table. The data is located on a 2nd sheet named 'Data2' in columns B & C. As you can see the range is already defined. How can i have this as a variable which holds the current address of the automatically selected - occupied cells in columns b-c? So in order a macro that can.
1) select all occupied cells in colums b-c
2)paste this range as an address in d1
3) assign a variable which has the range for the pivot table macro to complete its work.
Sub Macro8()
Sheets("PivotReport").Select
Range("B18").Select
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
"Data2!R1C2:R27C3").CreatePivotTable TableDestination:= _
"'PivotReport'!R18C2", TableName:= _
"PivotTable1", DefaultVersion:=xlPivotTableVersion10
ActiveWorkbook.ShowPivotTableFieldList = True
With ActiveSheet.PivotTables("PivotTable1").PivotFields("Products")
.Orientation = xlRowField
.Position = 1
End With
ActiveSheet.PivotTables("PivotTable1").AddDataField ActiveSheet.PivotTables( _
"PivotTable1").PivotFields("QTY"), "Sum of QTY", xlSum
ActiveWorkbook.ShowPivotTableFieldList = False
Application. CommandBars("PivotTable").Visible = False
End Sub
View 6 Replies
View Related
Feb 17, 2014
I have a workbook consisting of two sheets: a Monthly Class Schedule (Divided into five one-week blocks. Each block's vertical is Mon to Fri, the horizontal is 9 class slots. There are 45 class slots pw). Each class has one student and the cells are filled 'Student Number, First Initial, Surname' eg, '666 J Smith'. Students may be scheduled for several class slots per week and some class slots have no students scheduled. When the student attends a 'P'is added at the beginning of the cell eg,'P 666 J Smith'.
The Student Attendance Report has the students listed vertically on the left, arranged by Student Number, and then a column for each week.
At the moment I have to manually count the classes each student has attended for each week and enter the attendance figures in the appropriate week column. It's a PitA so I want to automate the process by using the S#s in the Attendance Sheet to search the week blocks in the Schedule Sheet for 'P S#' and auto-fill the week columns in the Attendance Sheet.
Sched and Attend February 2014.xls
View 1 Replies
View Related
Sep 13, 2013
So I am trying to rearrange some cells on a report based of some criteria using an IF formula and getting Blank cells. Here's what I have:
LastRow = Range("A" & Rows.Count).End(xlUp)
With Range("P2:P" & LastRow)
Formula = "=IF($F2=""/FEDERAL EXCISE TAX"",$I2,"""")"
.Value = .Value
[Code].....
So I just want it to identify whats in a cell and populate a related value if the text is present. Do I need to change formatting to find Tex or something along those lines?
View 2 Replies
View Related
Nov 19, 2007
the code of how do stop saving a report if the spefic cells are not filled.
For ex: In a excel sheet in we have A1,A2,A3 there should be some values else its should not save and should show an alert stating that this cell is empty....
View 9 Replies
View Related
Feb 16, 2014
I've got a forecast from a customer and need to summarize it with part number, quantity and date.
The spreadsheet is part no in column a due dates in row 1 values at the intersection of part no and due date and i don't want 0 quantity to report back.
my output needs to be partno, date due, quantity.
View 4 Replies
View Related
Aug 31, 2013
I have an excel sheet containing data as given below, wherein we receive certain report from each department on monthly basis and the same is mentioned as received against each month under header column. We need to remind the department about non receipt of report for particular months which contain empty cells. Macro is required to generate the report of empty cells mentioning the months against each department.
Available Data
Dept
Sep-12
[Code]....
View 3 Replies
View Related
Jan 6, 2007
Im trying to record a macro that will enter a formula in a cell each time I run the macro
Drop the Lowest2:
=IF(ISERROR(AVERAGE((SUM(C5:L5)-MIN(C5:L5)-SMALL(C5:L5,2))/(COUNT(C5:L5)-2))*Scale!$B$2*10),(IF(ISERROR(AVERAGE(C5:L5)*Scale!$B$2*10),"",AVERAGE(C5:L5)*Scale!$B$2*10)),AVERA GE((SUM(C5:L5)-MIN(C5:L5)-SMALL(C5:L5,2))/(COUNT(C5:L5)-2))*Scale!$B$2*10)
Drop Lowest1:
=IF(ISERROR(AVERAGE((SUM(C5:L5)-SMALL(C5:L5,1))/(COUNT(C5:L5)-1))*Scale!$B$2*10),(IF(ISERROR(AVERAGE(C5:L5)*Scale!$B$2*10),"",AVERAGE(C5:L5)*Scale!$B$2*10)),AVERA GE((SUM(C5:L5)-SMALL(C5:L5,1))/(COUNT(C5:L5)-1))*Scale!$B$2*10)
I know I can write the formula in a simpler way, but I was asked to make it like this.
The problem is that when I enter the formula in the cell while recording. I got a message: "Unable to record" so this part can't be recorded
View 14 Replies
View Related
Sep 1, 2009
This problem seemed to revolve around "digital signing" with further macro changes done from a different machine (without the proper certificate). Excel warns of the problem and then "unsigns" the project.
I've got a problem with spreadsheets that I've been working on. Now, when I tell it to record a macro, I get the macro name, shortcut assignment dialog box and then an error "Unable to record." After "Ok"ing that dialog box, the normal recording macro dialog comes up. Also, lo and behold, there will not be a macro recorded.
I've got no protected cells or sheets and it doesn't matter what security level is set. It is a "signed" macro but I can take off the signature and still have the problem. I checked for "Help - About" for deactivated modules and there was none.
View 2 Replies
View Related
Apr 12, 2009
find the attached Example file. I need to create a report either by using or without using VBA.
View 3 Replies
View Related
Sep 8, 2009
I made the mistake of creating hyperlinks to files on a server (using the \SERVERNAME convention) without using the "hyperlink base" option.
I've been sufficiently chastened, but the present problem is that I have many such hyperlinks that are now worthless because, when saved, they point to "../../[foldername1]/[foldername2]/[filename]", etc.
Need macro that would replace the first five characters ("../..") of all the hyperlinks on my sheet with //[MYSERVERNAME] ?
View 7 Replies
View Related
Jul 15, 2009
So I am attempting to run a macro that contains some if then statements that will change the text in a cell given certain circumstances. I am having an issue specifying the range in that it begins in cell A2 and it goes to the last data cell in the sheet and no farther. The issue with just selecting a whole column is that if the a cell is blank, it fills it in with no and it leaves me with 65,xxx nos in column A. Attached is the workbook with the sheet the code would be executed on and hopefully what the solution would look like. Also i have attached the troublesome macro I have written.
View 7 Replies
View Related
Jul 13, 2013
Whats the key in editing macros to know that you are not getting compile errors and how do you know when your in VBA which statements are repetitive? Do you always go by the macro recorder?
View 8 Replies
View Related
May 21, 2007
I have imported values from another program. Imported values are in 000:00 form (000 for hours and 00 for minutes). If there is less than 100 hours the value is still not treated as [h]:mm. For example:
029:15
How can I erase the first one or two zeros??
View 9 Replies
View Related
Sep 1, 2008
Is there a way to copy and paste my notes from Word into the text box once it is embedded in the excel worksheet?
View 9 Replies
View Related