the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata() Sheets("ConsolidatedYTDReport").Select Range("E2:H4202").Select Selection.Copy XXXXXXXXXXXX ActiveSheet.Paste End Sub
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1() Dim FirstAddress As String Dim myArr As Variant Dim Rng As Range Dim Rcount As Long Dim i As Long
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
I want to find data from a certain point and paste this to a cell. My objective is to get all the data on too one row. This row is always 1 in col M called Run#. The find locations never change, just the data being copied always changes . Heres example,
In col K find FHBASC and look across to the right 3 cells in col N and copy. Look in col M and find 1, paste above copied data into col GI.
Then move down rows to next FHBASC and repeat process until end of sheet.
If I can get a very basic simple macro to do this, then hopefully I can just re write to suit my other data.
From mySQL database, i am getting a ton of data that is all being inputted into a single excel cell. Within this cell, there are certain data points that i wish to obtain (Bank #, SSN #, Routing #). There are multiple difficulties in obtaining this information.
1. these cells contain the same fields, but different number of total characters (differing in names, addresses, etc.)
2. some of the data points (like SSN) are inputted incorrectly, so even though a SSN is only 9 digits/characters, I may have to output all 11 that the SQL database placed within the cell.
Can I get some help? I'm thinking of a search function/macro within excel, because all of the fields show up correctly.
something like (i know this doesn't work)
= or("cellA1" contains/finds/function SSN,return the 9 characters after "SSN ")
um...yeah. difficult to explain, i'm sorry!
edit: not sure what is wrong the file. I have attached a new one.
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Sheet order A B C
Date of delivery Product
Unfortunately simple Pivot table is not able to do this simple list.
Sub CopyPasteValue() Dim ARow Dim AColumn Dim BRow Dim BColumn Dim Value AColumn = 1
What I want it to do is to start in cell B1 and look down until it finds a non-blank cell; copy the contents of that cell. I then need it to go to the same row Col A and go down from until it finds the first non-blank cell then paste into the corresponding cell in Col B. It should continue this way through the rest of the worksheet. There is no set pattern to say to go down 5 rows or such. Also the number of pastes in each step is variable from 1 to ??
In my worksheet, the first non-blank cell in Col B is cell B3 and the first non-blank cell in Col A is A7. The paste should occur in cells B7:B10 because the next non-blank cell in Col A is A11.
how I might 'trigger' a macro to run when a certain cell was filled with any value at all. I have the macro working fine (it's a simple copy and paste special) but I want it to run automatically when the cell A20 has a value in it.
This Macro is supposed to get certain totals for me from diffrent pages. Instead of selecting an entire row I want to select specific cells, so when it finds the word total on the sheet, whose location can change often it will return the value two cells away.
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
My problem is as such; each month I receive an application for payment. This will contain around 20-30 worksheets. However I only need to interrogate around 3-4 specific ones. The worksheets I require contain data describing the plant/equipment a company has purchased, or materials purchased over a period of time. Each month the worksheets are updated with the previous months data appended to the bottom. I am required to established if the equipments have been purchased at the correct rate.
The worksheets are all protected thus in order to interrogate them I am required to copy an paste their contents into a new work book in order to format them and insert my new "assessment" columns. I need to keep the work sheets separate in the new work book as they have different layouts however they have the same layout and work sheet names each month.
I needs a macro which would allow me to open up a new book them copy the specific worksheets from a specific file into the new work book. I then have a separate macro which re-formats them into the layout I require.
I have a current macro that saves each sheet as their own file. The first 10-15 sheets are not really necessary, so I typically delete them once the macro has run. I am looking to add two things to my current code:
1. Add a tab called Start. Make the macro look for 'Start' tab and then just save each sheet to the right of that as its own file.
2. Save each sheet in the macro as just a copy/paste value. They current have a lot of links and it makes each file close to 3MB. That makes it incredibily difficult to paste all in one email.
Here is the current code:
Sub CreateWorkbooks() 'Creates an individual workbook for each worksheet in the active workbook. Dim wbDest As Workbook Dim wbSource As Workbook Dim sht As Object Dim strSavePath As String On Error GoTo ErrorHandler
I have this Excel File which has some sheets. All sheets are the same format like this: "I have read-circled the cells of interest"
I want to have a macro that can read the data from all the sheets (regardless of their name) and from the specific cells "red-circled" and copy and paste them into new sheet named "Report" in table format. Like this:
I would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
The macro finds the value in cell D11 (which is the name of a product) in a worksheet called "Summary1". It then looks for this value in another worksheet called "Output", specifically in a column with a named range called "Products". If the value being searched is found in the "Products" named range column (in the worksheet "Output"), the code below copies the entire row for it, to another sheet called "OutputSummary1". I would like to change the code as follows:
1) Instead of copying the entire row, for which the searched for value is found, from the sheet "Output" to the sheet "SummaryOutput1", I would like to instead only copy the values in columns A, B, and E to the sheet "OutputSummary1". Also, I would like the values to be pasted pastespecial so that the formulas in the sheet "Output" are not copied over, and only the values are copied.
2) Secondly, I would like to know how to perform the find procedure (searching for cell D11 contents) on all sheets in the same workbook beginning with the word "Summary" (There will be worksheets called Summary1, Summary2, Summary3, etc. that the macro should be performed on.) As well, the pasting should be perfomed on all respective sheets called OutputSummary1, OutputSummary2, OutputSummary3, etc.
Sub CopyPaste() With Worksheets(1).Range("Products") Set c = .Find(Worksheets("Summary1").Range("D11").Value, LookIn:=xlValues) 'this identifies the value D11 in worksheet called Summary1 If Not c Is Nothing Then firstAddress = c.Address Do c.EntireRow.Copy Destination:=Worksheets("OutputSummary1").Range("a" & Worksheets("OutputSummary1").Range("a65536").End(xlUp).Row + 1) Set c = .FindNext(c) Loop While Not c Is Nothing And c.Address <> firstAddress End If End With End Sub
I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.
At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.
Is there any easy copy/paste macro for such a thing?
I have 10 worksheets. They are labelled 'FEB', 'MAR', 'APR', etc...to 'NOV' (NB: JAN & DEC not needed). In column "G" on all these sheets I have the data as "CURRENT" or "OVERDUE". The first 3 rows on every sheet are headers, so the data starts at 'G4' on every sheet.
I then have an "OUTSTANDING" sheet which will display all of the "OVERDUE" items from the various months. I have an UPDATE_Click() event which when actioned needs to search all the column Gs in the month sheets and then copy the data from column 'B' to 'F' of the corressponding row to an "OVERDUE" result. The data from B-F then needs to be pasted in the next available row on the "OUTSTANDING" worksheet (starting at row 4, as first 3 rows are headers with merged and unmerged cells).
Nothing fancy, when the search go does the column and hits a blank cell that means its the end of the list and can move on to the next month.
I have a cell that contains various data but in the cell there will be a string of characters that will begin with either ON or TN followed by numbers. What I would like to do is have the sheet look at that cell and if there's a TN12345 (or any combination of numbers) or an ON123456 (same idea as the TN) I would like the sheet to pull just the ON or TN number out and paste it in a specific cell. The ON would have it's own cell to be placed in as would the TN.
Here's an example. C5 contains various data, a mix of text and numbers but it will have either an ON or a TN or both. I would like the sheet to automatically pull the TN number out and place it in A5 and the ON in B5. I would like this process to repeat all the way through the sheet to the max amount of rows since I have no way of knowing how many rows I'll need. Can this be done with a simple IF formula or does it have to be done in VBA or is it not possible at all.
I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet. Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
When I use VLOOKUP formula within a VBA routine ex: For LoopCounter = 1 to LastRow With Worksheets("0MATERIAL") .Cells(RowCounter, 5).FormulaR1C1 = "VLOOKUP(RC[-2],'0MAT_UNIT'!R1C1:R65520C12,4,FALSE)" End With RowCounter = RowCounter + 1 Next LoopCounter
How can I find out what row or cell address that the VLOOKUP found the data? The above code works perfectly but the problem is I need data from that same row in columns 4-11. I replicated the .Cells line above and made each one a VLOOKUP (for column 4, 5, 6, etc...) but this kills the performance. I have around 32,000 rows in sheet 0MATERIAL and around 50,000 rows within sheet 0MAT_UNIT
I have a workbook with many sheets in it. Within each sheet there is a cell with the Text "March 09" there are then 3 cells to the right of this cell with relevant information. Is there a Macro that can search for this text March 09, then copy this and the 3 cells to the right of it and paste special this information 1 cell below for all 4 cells.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date.
Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date Column D = loan# A Column E = loan# B Column F = status Column H = followup needed (Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows: Column G&H = Merged cells where due date will need to go Column I&J = Merged cells where loan# A will need to go Column K&L = Merged cells where loan# B will need to go Column M thru S = Merged cells where followup needed will need to go