Find Cell And Mark Area In Relation To The Cell
Mar 17, 2009
I'm trying to make a macro, which search for a cell value of "Year". And from that cell, I want to make a range selection down to the first empty cell in row B or the first cell value with "Contracts of difference".
See the attached document I want to mark row 50 to row 55, and Column A to K. However as this range is in different rows each time, I need to make the selection dynamic. And I belive the heading "Year" is the best reference point.
View 2 Replies
ADVERTISEMENT
Aug 29, 2008
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
View 4 Replies
View Related
Oct 16, 2013
I have big library books database file. now i want to re check all the book with physical stock and mark in excel file.
i have one more file with books barcode no.
now i want to mark multiple cell in sheet..
View 3 Replies
View Related
Dec 23, 2009
I have a Formula question which I can't seem to figure out. I want to set a cell so that when two other cells are above 80 then the cell is green.
If one of the two cells is bellow 80, the cell turns to yellow and if both are bellow 80 then the cell is yellow.
View 2 Replies
View Related
Mar 25, 2008
I will try to be as clear and concise as possiable and adhear to the forum rules. I'm not a excel wizz, though I know the bascics and am willing to learn, I have a list in column A, in thise list there are repeated words eg the word sugar is repeated in A23, A45, A56 etc. In column B i have condition format so when i type a 'x' it turns the cell color from red to green.
What i am trying to do is if i enter the 'x' in column B in relation to the word - in this case sugar - it will automatically enter a x in all the other cells in B that has the word in there corresponding A column that matches the orginal 'x'. So for example if the word sugar is repeated in A23, A45 and A56 regaredless of where i enter the 'x' in the b column, weather its B23, B45 or B56 then cells i didnt manually enter the x will auto update in corresondance to the word...
View 3 Replies
View Related
Mar 8, 2009
I am trying to find a cell address from an area, like this:
A B C
1
2 hello
3
4
I need to find "hello" 's address from A1:C4, I found that the function MATCH works in single row/columns only.
View 2 Replies
View Related
May 29, 2012
I am building an Excel sheet for my company which keeps track of who has done what with a new client in a step by step process. I have it set up so that once a department clicks complete in a box it automatically emails (VIA a macro) the next person who needs to do the next task. Some tasks are done by the same person no matter what, other tasks are done by a project leader which is different depending on the client.
The problem I'm having is that, within the macro, I need to reference an email address in a cell X cells to the left in the ".TO" line.
So, in Column A I have the CLIENT, Column B The PROJECT LEADER, and Column C The PROJECT LEADERS EMAIL. Then the next 22 Columns are labeled steps with drop down boxes, once the have selected "COMPLETED" it triggers the macro and send the email, just not on the ones when it needs to email the PROJECT LEADER, since it's a variable. Below is the macro, how I can have the ".TO" line in the email reference the email address in Column C to the left of it?
Sub Mail_Workbook_1()
Dim OutApp As Object
Dim OutMail As Object
[Code]....
View 2 Replies
View Related
Mar 22, 2008
I'm a average excel user, i know my way around it and kow common and basic formulee, VB isnt a strong point, but i am willing to attemp anything for this, let me explain
Lets say in colum A I have a list of items, in colum B i have a check box, currently the check box is red, if i tpye a x it turns green due to conditional formating. That works fine...onto the problem...
Lets say in colum A i have my items but they are repeated...eg A1, A145, A166, A122 are all the same item, what i want is regardless of where i place the x each check box under coloum B either gets a X and turns green, or just turns green, i dont mind...
I dont think conditional formatting can cut this, though i may be wrong. Ive tried to use the IF function under condtional formatting but ran into problems...
View 9 Replies
View Related
Jan 2, 2014
i'm using excel 2003 and i'm trying to mark 7 cells in a row by conditional design by one of the cell
example : if the date on january? mark all line in yellow, for february mark in red and ect
A B C
528602545 assafsarit@walla.com 01/01/2013
527271005 eti_sh6@walla.com 01/01/2013
[Code] ...........
View 4 Replies
View Related
Jan 4, 2010
i have just read the thread started by scabertrain regarding "if" conditonal formating, but mines slightly different and i cant make head nor tale of the fomula shown.
So... Monthly budgeting... using a projected outgoing (A1) and an actual outgoing (A2) i want the colour "A2" to change depending on whether i have spent over the budgeted amount, green being underspent, orange for on target and red for over spending....
Example:
I predicted (A1) that i was going to spend ｣50 on a night out, but my actual spending (A2) was ｣100, i would like A2 to turn to red.
View 3 Replies
View Related
Feb 2, 2014
I have the following formula and need to incorporate that it is only a "B" if B20 also matches in named range "Breakdown_RSC"
Formula: ...........
I need the following section to take into account the data in B20 as in if it matches the data in the cell it should be a "B" in the cell.
View 2 Replies
View Related
Dec 18, 2008
Is there a way to set a cell so if you click it, an "X" will be in the cell and if you click it again it will clear? Specifically I am looking to do this in the "1st Trip" column on the attached. I was going to use a check box but the appear to small and it does seems as though in Excel 2003 the size can be adjusted?
View 11 Replies
View Related
Aug 22, 2007
I inserted a check mark and tried to us a vertical lookup and post the check mark
All I get is a horseshoe looking character. When I do reference to the cell I get the same symbol. What I trying to do is to place a check mark by the items which have been approved. I know I could do it with an "X" or a color, but top management wants a check symbol. I am using Excel 2007
View 3 Replies
View Related
Jul 17, 2014
I am creating a resource and I'd like the users of this resource to be able to click a cell which will then automatically come up with an x or similar symbol (tick?) and then if they click the cell again the x will disappear. Is this possible? I don't want a drop down box where they have to choose what they want, I want it to be an automatic action when the cell is clicked because there will be many cells that I will need to do this.
View 14 Replies
View Related
Nov 13, 2008
I need to click on a cell and when I click on it, it should change colour and insert a tick (or other symbol).
View 14 Replies
View Related
Mar 16, 2009
I have to manually enter the code nos. of the hard copy to find the code in the soft copy. After finding the number, I wish to mark it as so that double work should not be done or to find which code's hard copy is not with me.
I am using Find and Replace to find the number and after it is found I have to click the replace tab to enter colour in it.
Is there any auto function to mark as soon as I find the required number instead of clicking the replace tab to save my time.
View 9 Replies
View Related
Dec 16, 2008
I need to find duplicates subnet information in row F and mark the words "Duplicate"
Then I need to do the same with Row K. I need to find any duplicate subnet masks.
The reason for this is that I merged two orginizations into one spreadsheet and I need to find the duplicates in Company A and Company B's subnet and mask information.
View 9 Replies
View Related
Feb 15, 2010
look at the attached file. This might be the perfect job for a macro. I am trying to find the SKU's from sheet 1 in sheet 2 and subsequently mark the matching SKUs in sheet 2. Ideally, I would like the SKU's that could not be found to be set to Quantity "0"
View 2 Replies
View Related
May 8, 2008
How do you find if the last character in a string is a quotation mark?
View 9 Replies
View Related
Mar 19, 2009
I have a approx. 70 excel sheets with thousands of entries. Within a single sheet there are some duplicate entries (based on an account number). I find the duplicate entries by using the excel 2007 conditional formating and then sort by color to only show the duplicate entries. There are often hundreds of accounts that are duplicates. Sometimes there are more than 2 identical account duplicates (could be 3,4 or more). In each entry there is a number representing the rating of said account. These numbers differ within the duplicates. Example............
I am trying to find a formula that will choose a "winner" and enter a "W" based on the highest rating within the duplicate entries and then ideally assign an "L" to the loser duplicate account(s). Sometimes there is no rating, other times the rating could be the same in which case any account (does not matter) can be assigned a "W" and the others an "L"
View 3 Replies
View Related
Dec 11, 2009
I have two sheets in my workbook. One named singledump and the other individualfileselect.
Within single dump i have daily data loaded with certain cells containing comments added for that day of the week.
E.g. Tuesday 3000
Below average clearances, we will look in to this further throughout the week.
What i would like to do is have either a text box area of just simply one cell updating with a the first comment from the week and to then have two buttons back and forward allowing the user to click and the cells will update for the next comment that week or go back to the comment before.
How would i be best going about this? To be honest i would prefer to keep away from text boxes and would be happy with just the two buttons scrolling through specified ranges to update a cell on individualfileselect sheet.
View 6 Replies
View Related
Apr 3, 2012
I have a code Ive been trying to get to work. It works fine with selecting the print area based off a cell value, it just wont update when ever the value changes.
This is on the Sheet's code
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target Range("A1") Then Exit Sub
Call PrintbyName
End Sub
And this is in a module
Sub PrintbyName()
Dim rng1 As Range, rng2 As Range, rng3 As Range, rngPrint As Range
'Refer to the named ranges
With Worksheets("Permit Page")
Set rng1 = Range("$A$1:$bx$603")
Set rng2 = Range("$A$1:$bx$493")
Set rng3 = Range("$A$1:$bx$493,$a$549:$bx$603")
[code]......
I wasnt sure if I was suppose to fill out where it says "nothing".
View 9 Replies
View Related
Mar 12, 2014
I am trying to set the print area based on cell values, but I keep getting errors when running the macro. It fails where I have highlighted, but rc.Value shows as the proper number.
[Code] ....
View 4 Replies
View Related
Dec 8, 2011
I'm looking for a way to set the print area based on the value of a cell. I have a worksheet that prints a 12-page document, with data pulled from separate sheets. At the bottom of these twelve pages is an additional 2-page section that I only need in certain instances.
For example, if a cell (let's call it A1) on Sheet1 says "brown," I need the print area set to include these additional pages. If that same cell ('Sheet1'!A1) reads "yellow," however, I don't need to include the 2 pages in the print area.
View 1 Replies
View Related
Mar 8, 2007
I have a template worksheet that several people use and print from.
The range on this worksheet used is A1:C499
I want the VBA to look at tha last cell that is populated in column A and set the print area to suit.
i.e. the last cell used in column A could be A277. then I'd want the print area to be A1:C277.
View 9 Replies
View Related
Feb 6, 2008
I have various lists of data (using Data > List > Create List...) that do not always have the first cell in the list in column A. I have spent quite a bit of time searching the internet to try and find a macro that will work the same as... Data > Sort > Sort By: Col xx > Then by: Col xy.
Dave supplied me with a macro that will sort a range by the first column:
Sub SortThis()
With ActiveCell. CurrentRegion
.Sort Key1:=. Cells(1, 1), Order1:=xlAscending, _
Header:=xlNo, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End With
End Sub
I have recorded macro that does the same and looked at the code but this uses Range and specifies the cells to be sorted. I have not been able to work out how to modify the code Dave posted to do a minor sort by the second column. I am after a macro that will determine the range (could be a varying number of columns and rows in different places). For however many columns there may be the macro will sort the full width and height by the first column and then the second column, with all the data within a particular row not being split.
View 2 Replies
View Related
Feb 6, 2014
I have a calculator and I am trying to set a macro that will take the cells highlighted copy them to another sheet, change the format to standard( no background color) make the data fit in one page and print it.
this is what I got so far:
Sub Set_Print()
'
' Set_Print Macro
' set printing area and print
[Code]......
View 3 Replies
View Related
Jun 18, 2007
I need to use macro to find the last column index number within the print area. My cell sizes change depending on the data entered so the last column in the print area changes. The code I want to implement involves putting a title at the top of the page and creating a border that spans the width of the page. This is what I have so far:
LastColumn = Cells.SpecialCells(xlLastCell).Column ' replace this with last column in print area
Rows("2:2").Select
Selection.Insert Shift:=xlDown
Range(Cells(1, 1), Cells(2, LastColumn)).Select
With Selection
.MergeCells = True
.HorizontalAlignment = xlCenter
.VerticalAlignment = xlCenter
End With
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlMedium
.ColorIndex = xlAutomatic
End With
View 7 Replies
View Related
Nov 29, 2006
I want to check relations between 2 columns.
Example:
1 2
1 3
1 4
4 1
4 5
4 3
2 1
2 3
In case that I have relation 1->2, I what to check do I have relation 2->1.
Could you propose me a formula or script to make this check.
View 3 Replies
View Related
Aug 1, 2007
i am trying to find a cell in column C (if cell =140) and copy that cell and the adjacent cell in column "D" to worksheets called" upload" then repeat through multiple tabs- repeating process and dumping values in columns on the "upoload" worksheet
View 3 Replies
View Related
