Attached is a copy of my data and i want to find the mode of each months data without typing it out into long hand form, eg. 111122222333344444 etc. so i believe the answer will be some where around 5 for most of them, but i just don't know a formular to show it automatically on the spread sheet.
View 2 RepliesI need to convert data from long to wide form but I haven't been able to do it. I want to try and avoid using vba because I have exactly 5 hours of experience with it, but if there is no other way I will just have to learn it quick.
View 4 Replies View Relatedthe first cell in my table has a date but I only want the table to be 2 months long so normally I would use the formula =cell above+1 but with different length months that wont work so then I thought can i have a formula like
=if(B7>$B$7+2months,"",B7+1)
where b7 is the first date of the first month
Is there a formula to convert a Decimal location into D/M/S form for Lat and Long
View 9 Replies View RelatedHow to find Median,Mode in a excel sheet which contains more than 255 rows of data?
View 6 Replies View RelatedOne has the master data in it ( Item #Lot#/Cases per pallet/date ) = 30K rows
Second is the list of item #'s .
I need to find the MODE of cases/pallet by item number.
I'm receiving this message when I attempt to use the Find, Replace function. Formula is too long". I have a column of cells containing text only. ( about 2-3 paragraphs worth) I'm trying to replace a name with another name, which works fine where the cell contains a single or few sentences, but fails to replace when the cell contains too much information.
View 8 Replies View Relatedformula to find specific text from statement.
I manage to use formula find for 1 text in 1 statement, but in confuse how to get another text found if i have "8 text" to find. Generally, there will only be "1 text" for each statement.
Maybe in 1 statement there have only "IC" or "Staff Tagging" or Name" or "Product" or etc till 8.
I am trying to create a form to use as a golf tracker. I basically have created a scorecard where I input the date, score, fairways in regulation, greens in regulation and putts. I want to be able to put that information just like if it was a scorecard and then have a button that says submit. Then that information is output into individual sheets (i.e. one for scores, one for fairways, one for greens and one for putts).
I've built (but not completed) a spreadsheet used to organize multiple Bill of Material lists. This list is a row-by row list of products with information relating to a specific part number including: Mfg, Part#, Qty Used, Cost Ea, Vendor, among many more.
Here's what I'm trying to accomplish first. As this list grows, my intension is the be able to recall a row of data (or control what columns of the row are recalled) from this list and be able to easily add them to the list. I would like to be able to do this by typing in data in one cell in the row (like the Part#), and then have a macro or VB code that will automatically fill in a defined number of columns with the descriptive data like: Mfg, Cost Ea, Vendor, etc.
Currently, the data for the rows (if it already exists) would reside higher up in the list on the same worksheet but could also potentially be on another tab in the workbook.
I would like to be able to put the year in A1 and have in column B the months that have 5 Fridays in them. For instance if I put 2010 in A1, I would like in Column B January, April, July,October, December to appear. Any help would be appreciated if I put 2005 in A1 then I would like April, July, September, December.
View 9 Replies View Relatedi have column A and B with list of dates. Column A has earlier dates when compared to column B.
i am trying to find a formula with which i can know the difference between the dates in "number of months".
Ex: Column A has 06/01/2014 and Column B has 08/30/2014. The difference between the dates in terms of month is 3 which i need in a formula.
Log sheet Col a = Dates
Col d = Route ( Letters and numbers)
Col F = Times (1.2-2.3- examples)
Log sheet has 1,550 rows +
How I have been finding total for the Last 12 months is the formula below
=SUMIF(LOG!A:A,">="&TODAY()-365,LOG!F:F)
Now what I would like to try and do is the same BUT.
using COL D (on LOG sheet) to find out when I went to for example "JTF"
be advised that COL D is a route, so there are many results in each cell in col d..
So examples below
COL F On Log sheet
OERT-JPF-JMF-ASG1-JTF
OERT-JTF-JTF-ADC17-ADC17-ARAB3-ARAB3-DHAMC-JSK
OERT-JTF-JTF-ASG1-R655-JPF-JMF-LCL-JTF
OERT-JTF-JTF-R655-DHAMC-HAW-DHMAC
OERT-JTF-JTF-JTF-HI4-HI4-R655-ADC38-RS55-ES76-JPF-JMF-JPF-JMF
OERT-JTF-JTF-HI4-R655-ADC38-ES76-PMT-FLIGHT TOUR VIPS
what is the formula to convert the date in MMYYYY into some numbers so that I can derive the difference between 2 dates?
For example:
I have 2 dates 31-Jan-09 and 28-Nov-05 in Column A & Column B respectively. I would like to derive no. of months between the difference of the 2 dates which in this case is 38 months.
I'm missing something in my UserForm initialization code. If I fill the form out once and click 'OK' (run the code to put the form data into a sheet), when I go back into the form all the old info is still there. If I then click 'Cancel' (Unload Me) and reopen the form, the old data is cleared out. What am I missing to make it clear it out the first time?
View 2 Replies View RelatedI'm having trouble trying to come up with a way to insert data fields into a spreadsheet form. I have a travel authorization form that I would like to have automatically fill in the required fields based on typing in a name. i.e. I would type in an employees name, and it would automatically fill-in the correct address, etc for that employee. I have attached a spreadsheet that contains one sheet as the form, and another sheet containing the employee data. I know nothing about VBA, but I have a feeling that is where I need to go.
View 3 Replies View RelatedI am needing to create a form that exports data (a quote) to an Excel Db (table) and is then able to recall the data back into the form. (the default form in excel does this and I want to copy that.)
Once the data is called back in, I can then export it to another Table to show that the quote has been approved and will be used.
I am having trouble with the VBA coding that copies the inputted quote in Cell C2 (the reference for the quote number) of the "Form" sheet and looks it up in the "Database" sheet. I have tried several variations of code, but nothing works so far.
-SS
Sub RecallQuote()
'
' RecallQuote Macro
'
Sheets("Form").Select
Range("C2").Select 'this is the cell that holds the quote number to look up from the table
[Code] ......
find the attached workbook
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
It's probably best if you open up the attached example spreadsheet that contains sheets "Before" and "After" otherwise it might be pretty difficult to understand what I'm talking about.
So I have this spreadsheet where I have part numbers in column B, status of the orders in Column I and lead times in Column M. What I want to achieve is to get of Mode (col N), Median (col O) and Average (Col P) values of each part number and each of its status using the lead times in Column M. If possible I would only like this on the top lines of each of these. I have done the formulas manually on sheet After so if you click on the formula you can see the range's it covers.
I did create a concatenation in column K (conc of column B and I) as helper column because in theory this might make things a little bit easier.
Now going into second part. I would also like to do something very similar but only using the part number and status "Finished" and get the values in columns T,U, and V on the top row of each part number. I made some blue boxes and arrows to kind of point out the idea.
The solution can be either formula based or macro, it really doesn't matter, however I will intent to use it within macro either way.
I'm in Excel 2010, and the cell with the date I want to work from is H22.
I'm trying to get the difference of the (date+12 months)-TODAY() to appear in months and days.
Here's the latest thing I tried (that doesn't work):
=IF(DATEDIF(H22,TODAY(),"y")>=1,DATEDIF(H22,TODAY(),"y")&" yrs, "&DATEDIF(H22,TODAY(),"ym")&" mths,
"&DATEDIF(H22,TODAY(),"md")&" days",IF(DATEDIF(H22,TODAY(),"ym")>=1,DATEDIF(H22,TODAY(),"ym")&" mths, "&DATEDIF(H22,TODAY(),"md")&" days",DATEDIF(H22,TODAY(),"md")&" days"))
I should also probably note that the date in H22 is the result of another function.
=EDATE(G22,12)
I have a sheet with data 7 columns wide and up to 1500 rows long. Below are a few lines from the sheet. The data from the sheet is grouped into "months" as shown in the header down the first column, "Show June, 2013..." and "Show July, 2013...", and so on. Is there a way I can make Excel re-align the data into ONE long row of data for each month? Each new month row must be "triggered" by the text (like the word "Show") because the actual cell number of where the new month begins may change with new updates. I want to do this because I plan to refresh the data once at the end of each day from the web and apply the new data to the "next" row of data. So eventually, I can have a history of "Last" values I can chart for each "strike" for each month.
CALLS
PUTS
Show June, 2013 Options Hide June, 2013 Options
Symbol
StrikePrice
Vol
Last
Last
Vol
Symbol
quote
15.00
2.00
14.25
0.02
22.00
quote
[Code] ........
Column L14 - L47 is not very wide on my spreadsheet because I wanted the whole sheet to be in view when you look at it on the screen. But there will be times when the user needs to put quite a bit of information in there. The cell will let you keep typing as long as you want, but if you don't have any information in the cell to the left of it, then the information spills over into those cells.
I don't like the look of that. Is it possible to make the cell automatically populate a drop down type box if the information is longer than the cell. Then have the cell display normal when you click out of it, whith a little arrow in the bottom right hand corner of the cell to tell the user that there is more information in that cell, they just have to click on it.
I am using a userform and i have added some data to listboxes but it comes as being too long when it is only one character. I checked in properties to change the settings and tried to change everything but it doesnt work.
View 2 Replies View RelatedI have several fields in a row that contain names of files e.g. 123.xlsx. Some fields will contain file names that will be duplicates of each other and some will be blank entries (although the blank entries can be changed to a value such as 'n/a' or 'no' etc if required).
I require only the non duplicate values to appear in the final cell, each separated with ';'.
My data is in row 2 of a spreadsheet and in every other column (A,C,E,G,I,K,M...for 45 instances in total).
I have used the following formula to identify the unique values (example below for the first four cells):
=A2&IF(C2=A2,"",","&C2)&IF(OR(E2=A2,E2=C2),"",","&E2)&IF(OR(G2=A2,G2=C2,G2=E2),"",","&G2)
This works well and if there are several blank entries then I use a SUBSTITUTE function to change the multiple ',,,,' to a single ';'. So I only see the unique file names in the final cell, separated with ';'.
However, the above formula becomes longer and longer when each cell is added to it. I have over 40 cells that need to be added and I wondered if there was a better way of doing this?
I have a date column (Column E: Date Entered) on my spreadsheet that I need to set conditional formatting on. There are two conditions:
1) 18 months from the date in the cell needs to be highlighted yellow
2) 24 months from the date in the cell needs to be highlighted red
I'm looking to create an inventory days on hand calculation (DOH), but I'm not quite
sure what formula will do the trick. Here is an example:
DOH......FG Inv......1/29/2009......1/30/2009......2/2/2009......2/3/2009......2/4/2009
X..........80.............20................20.................20..............20..............20
I'm trying to solve for 'X'. My finished good inventory (FG Inv) is 80pcs.
That will cover customer demand out to 2/3/2009. Therefore, I have 4 DOH
of inventory.
I'm looking for a formula to determine the 'DOH'.
I have a simple inventory spreadsheet that is doing everything I need minus one function. I have not been able to figure out how to make this work yet, maybe I can get some help. We remodel apartment complexes. I purchase material and hand it out to the contractors. I am using one page to track all movement of the items, but I have another page that I want to do that math and tell me what I should have on hand. Example: (On sheet1 "movement") I hand out 20 outlets. On my inventory on hand sheet I have a line that says "Outlet", the current quantity is 40. I have a drop down list so that on the Movement page I select "Outlet" in column A and in Column B I put in the quantity. I want to keep a running total on my IOHand page of everything, so that it would automatically subtract the 20 I just handed out and leave my IOH as 20. I have about 100 items on my IOH page. I assume I need a formula in the quantity cell of my IOH page that will search the Movement page and look for a match to what is in column A and Sum all of my "outlets" or "sinks" into the right cell.
View 7 Replies View RelatedI have to enter a 2D array by hand into code because I am doing it in PowerPoint VBA, but I can't find out how to enter a giant array manually.
I know I could do it like this:
MyArray(0,0) = 1
MyArray(1,0) = 2
MyArray(2,0) = 3
...
MyArray(99,99) = 10000
But obviously that would be a giant mess.
Couldn't I just define it like:
{0,1,2,3,4,5,6,7,8,9,...,99,100;
101,102,103,...,199,200;
...10000}
I'm trying to use application.match() but I'm running into a issue where I don't know if I'll be matching a string or long data type...
Here's the snippet of code:
Code:
' UNIT DATA
' Set Unit#
s1 = ActiveSheet.Pictures(Application.Caller).Name
iLen = Len(s1)
s1 = Mid(s1, 2, iLen - 2)
' Set Sel Ex Work Date
iCheck = Application.Match("MACHINE_NUMBER", Sheets("Allocation").Columns(1), 0)
[code]....
How can I get application.match to look for strings if s1 = "ABC123" or numbers if s1 = "123456"
I've tried dim variant and s1 + 0... But, haven't come up with a solution.