I am using a userform and i have added some data to listboxes but it comes as being too long when it is only one character. I checked in properties to change the settings and tried to change everything but it doesnt work.
View 2 Repliesi need to be able to fill a combo box on a userform with the data on sheet1 and when you select the item from the combobox it will populate the textbox below.
View 5 Replies View RelatedI have used a userform found on this forum (I cannot find the link) that displays row data from a range within a listbox. Unfortunately though you cannot determine the column width. As such I wondered if it was possible to show the data within other listboxes. So for example in listbox1 you can see 5 columns accross (from a range) however one of them is very wide.
Looking at Listbox1 you can only see the firsy 20 characters approximately in each column. Is it possible therefore that once this row of data is selected that the contents of the columns is duplicated in other listboxes on the same userform that can be expanded to accommodate larger text?
I have a UserForm where the user can enter figures for 143 different items which they select via a combobox drop down.
When I tested it, I hit the submit button but it says the procedure is too large!
Here is the code which is repeated 143 times but with a different row number and range each time (in red):
[Code] .......
So the next bit of code would be exactly the same except the range would be C5 and the row would be 18.
The range is always going to increase nice and easily: C5 up to C146.
The row number is a bit hit and miss.
Is there a way of significantly decreasing the size of this or will I have the break the code down into different UserForms?
with printing a long userform? Unfortunately, the me.printform does not print out the whole form. It gets cut off because my form is too long and slightly too wide. I also tried to do a print screen, but unfortunately, because my form is too long, it will only do a snapshot of a portion of the form. In my case, on the bottom as that is where I have placed my command button.
Does anyone know how to bring the whole form out to excel or word? I don't mind doing that as long as I can print out the whole form?
My difficulty: I have an Excel 2007 DB xlsx Workbook file (mydb.xlsx) made up of several (8) Worksheets. I can't modify the content of this DB. For this reason I 've created another Workbook (MyGUI.xlsm) implementing a user interface for db querying.
The userform let the user making searches using the find method (criteria: "Text contains...") In the DB file there is one particular Sheet with thousands of entries. This makes the searchs too long (30 seconds). During this period the entire form is blocked.
My question: when the user realizes the search is too long I'd like to stop the current search
introducing for example a new button "stop current Search" to click it in these situations.
I have a sheet with data 7 columns wide and up to 1500 rows long. Below are a few lines from the sheet. The data from the sheet is grouped into "months" as shown in the header down the first column, "Show June, 2013..." and "Show July, 2013...", and so on. Is there a way I can make Excel re-align the data into ONE long row of data for each month? Each new month row must be "triggered" by the text (like the word "Show") because the actual cell number of where the new month begins may change with new updates. I want to do this because I plan to refresh the data once at the end of each day from the web and apply the new data to the "next" row of data. So eventually, I can have a history of "Last" values I can chart for each "strike" for each month.
CALLS
PUTS
Show June, 2013 Options Hide June, 2013 Options
Symbol
StrikePrice
Vol
Last
Last
Vol
Symbol
quote
15.00
2.00
14.25
0.02
22.00
quote
[Code] ........
Column L14 - L47 is not very wide on my spreadsheet because I wanted the whole sheet to be in view when you look at it on the screen. But there will be times when the user needs to put quite a bit of information in there. The cell will let you keep typing as long as you want, but if you don't have any information in the cell to the left of it, then the information spills over into those cells.
I don't like the look of that. Is it possible to make the cell automatically populate a drop down type box if the information is longer than the cell. Then have the cell display normal when you click out of it, whith a little arrow in the bottom right hand corner of the cell to tell the user that there is more information in that cell, they just have to click on it.
I have several fields in a row that contain names of files e.g. 123.xlsx. Some fields will contain file names that will be duplicates of each other and some will be blank entries (although the blank entries can be changed to a value such as 'n/a' or 'no' etc if required).
I require only the non duplicate values to appear in the final cell, each separated with ';'.
My data is in row 2 of a spreadsheet and in every other column (A,C,E,G,I,K,M...for 45 instances in total).
I have used the following formula to identify the unique values (example below for the first four cells):
=A2&IF(C2=A2,"",","&C2)&IF(OR(E2=A2,E2=C2),"",","&E2)&IF(OR(G2=A2,G2=C2,G2=E2),"",","&G2)
This works well and if there are several blank entries then I use a SUBSTITUTE function to change the multiple ',,,,' to a single ';'. So I only see the unique file names in the final cell, separated with ';'.
However, the above formula becomes longer and longer when each cell is added to it. I have over 40 cells that need to be added and I wondered if there was a better way of doing this?
I have a userform with a listbox that has 6 columns (D2:I50) which works great. In column J (J2:J50), I have data which needs wrapping so I plan on putting it in its own listbox. Is it possible to have another list box but one that operates as the first one is scrolled?
View 2 Replies View RelatedI am creating a userform with a listbox.
When I select multiple values from the listbox, how do I apply the selected set of values (user can select up to 10 out of 80) to a range of cells in a different sheet (in the same workbook), which cannot contain any blank cells?
I need to convert data from long to wide form but I haven't been able to do it. I want to try and avoid using vba because I have exactly 5 hours of experience with it, but if there is no other way I will just have to learn it quick.
View 4 Replies View RelatedI'm trying to use application.match() but I'm running into a issue where I don't know if I'll be matching a string or long data type...
Here's the snippet of code:
Code:
' UNIT DATA
' Set Unit#
s1 = ActiveSheet.Pictures(Application.Caller).Name
iLen = Len(s1)
s1 = Mid(s1, 2, iLen - 2)
' Set Sel Ex Work Date
iCheck = Application.Match("MACHINE_NUMBER", Sheets("Allocation").Columns(1), 0)
[code]....
How can I get application.match to look for strings if s1 = "ABC123" or numbers if s1 = "123456"
I've tried dim variant and s1 + 0... But, haven't come up with a solution.
Looking for examples of the following:
1. population a combobox in excel vba using code as opposed from a sheet
2. population a listboxin excel vba using code as opposed from a sheet
3. population a combobox in excel vba using text from a file as opposed from a sheet
4. Getting the values from a combobox on a form to populate cells on a worksheet
These list boxes and comboboxes will be on a form.
I have a listbox (form control) on an excel sheet, where the user can select (or deselect) multiple entries.
Is there a way to have vba spit out which options are selected? if I choose "single" for selection type, it will tell me which option i have selected. Is there something similar for multiple?
How to put these multiple listboxes in my form that allow the end-user to make selections and then after they are done, click the submit button that queries the results. I have read so many books and nothing in the books works.
I created a query that includes all the fields in each of the listboxes. For example :
[Code] ....
This way each listbox and there are 11, has distinct values based on my qual_main table and it connects to whatever the other table is that contains the actual values I need to pull. The listboxes display correctly yet when I put the query in my button to run it based on what the end-user selected from the listboxes, it does nothing. I have tried several things and the last code I tried is as follows:
[Code] .....
I'm trying to make two multi select listboxes in excel. I have tried I myself, but I know the excistence of VBA only since one week .
In sheet1 I have a number i.e. 50 in "A1" . First I want to make a list of this number, so cell "A2" = 1, "A3" = 2, .... "A51" = 50. This range has to be variable since the number can be 1 but als 100.
Then I want to populate ListBox1 in sheet2 with the list from sheet1. Next I want a second ListBox (ListBox2) and two buttons ("Add item" and "remove items") to move items from ListBox1 to ListBox2 and back.
Finally i want the selection that is made in ListBox2 to be put in sheet1 in a specific column (let's say C) where "C1" is the first selected item from ListBox2 "C2" the second and so on. This range has to be variabel since the number of selected items is not known.
I have a number of listboxes on a worksheet that I want to use to filter data on another worksheet.
I thought something like the following would work but I need the correct syntax and/or modifications to the method:
for each listbox in activesheet.listboxes
for each selection in listbox.selection
filter data accordingly on other sheet
next selection
next listbox
i have a long column pair of data, each entry in its own cell:
10/5/20088:30:00 AM
10/5/20088:46:00 AM
10/5/20089:14:00 AM
10/5/200810:18:00 AM
10/5/200810:42:00 AM
11/5/20088:30:00 AM
11/5/20088:46:00 AM
11/5/20089:14:00 AM
11/5/200810:18:00 AM
11/5/200810:42:00 AM
12/5/20088:30:00 AM
12/5/20088:46:00 AM
12/5/20089:14:00 AM
12/5/200810:18:00 AM
12/5/200810:42:00 AM
13/5/20088:30:00 AM
13/5/20088:46:00 AM
13/5/20089:14:00 AM
13/5/200810:18:00 AM
13/5/200810:42:00 AM
14/5/20088:30:00 AM
14/5/20088:46:00 AM
14/5/20089:14:00 AM
14/5/200810:18:00 AM
14/5/200810:42:00 AM
how can i program a macro to 'split' this column according to date? please refer to the attached picture as an example. i know this is probably a simple question but please bear with me i'm still new to excel programming.
Excel 2003. When the Vlookup List becomes impractably long to select data from the cell dropdown. Is there an alternative prefered method to entering data from the long list?
View 7 Replies View RelatedAny way to find out what list boxes are on the active sheet with vba? I have a massive file loaded with listboxes, some copied from other sheets. I am trying to copy the selected value from to the worksheets themselves. I can pull the selected item from the Cell Link's Index or the bound item, but only if I specify the listbox. There are 57 sheets and up to 6 listboxes on a sheet, Do I have to go through and give them all individual names, such as the sheetname_listboxname.
View 1 Replies View RelatedI have two excel sheets, one loads up in Listbox1 and the other in Listbox2, i would like to be able to see if any entries in listbox2 match with entries in listbox1 and then to display the matches in listbox3 with a click of a command button. Is this possible? If so, how would i go about it?
View 3 Replies View RelatedI have a google earth KML file that I have converted to text, and through a bunch of manipulation have been able to pull a series of GPS coordinate strings into a single cell string. Unfortunately, the string data is beyond what excel 2007 can handle for a single cell. so my thought is to have excel pull each coordinate string into a separate cell with which i can then run a macro to develop a new KML dynamically. (changing multiple attributes based on a query to a database)
Each string of coords actually maps out a single region (path) on the KML, truth be told it is telecom rate center data, and each rate center will have numerous other variables applied to it depending on my company's voice network capability for a given rate center. Currently my only desire is to depict differently any rate centers that I'm able to deliver VOIP services to by showing them in a different color...but these change very often so it will support to be able to auto generate the map from time to time.
the raw data from the KML looks like this:
Code:
CLINTONVL
RATE_CNTRCLINTONVL
STATEPA]]>
ff000000
1
0
1
[Code] ..........
After doing my data import, i extracted via various manipulations, the rate center name (a common lookup value that stays constant across multiple databases), and the string of coordinates. this is where i run into trouble. i need to pull each coord into a separate cell assuming i won't run out of cells in the x coordinates to gather this data OR find a way to grab the data via another lookup to another document...not desireable.
I want my output to look like:
Code:
RC_NAMECOORDSLATAVoip?
ALIQUIPPA
80.334114,40.520974,0-80.327493,40.520023,0-80.323915,40.51957,0-80.31997800000001,
40.519933,0-80.316958,40.521221,0-80.314431,40.521445,0-80.314262,40.521332,0-80.31398,
40.521194,0-80.31315600000001,40.520832,0-80.313057,40.520794,0-80.312805,40.520641,
[Code] ........
First off, my import was jacked up by missing some comma's...this i can fix easily with the string importation and manipulation HOWEVER...i still run into the issue of string length OFTEN.
I have 7 different listboxes, laying on top of eachother. When I select OptionButton1 I would like to see ListBox1.
This works fine the first time I push the radiobuttons. But I can't go back again..
This is my codes for the optionbuttons;
Code:
Private Sub OptionButton1_Click()
If OptionButton1.Enabled = True Then
ListBox1.Visible = True
[Code]....
I am trying to clear check boxes and list boxes on multiple worksheets within a workbook. Below is what I have,but doesn't work. Note: the "bottom " code does work to clear selected cells of their data. I tried to create a macro for the list boxes selecting "----" which I have as the last entry in the vlookup table but was totally unsuccessful at.
Sub cleardata()
Dim Obj As OLEObject
Dim ws As Worksheet
[Code]....
I am designing a userform that involves a listbox that I am having trouble with. Please note I have little experience with vba, so I don't understand most codes.
I want to make a mulitcolumn listbox, populated with the attached pivot table. I really do not know where to start, and there is no "populating multicolumn listboxes for beginners" instructions anywhere on google or in here. At least, none that I understand.
What I am trying to create is a 2-column listbox, where in the first column, the "code" fields are shown, and in the second column, the corresponding " Name" fields are shown. In the pivot table, you can see how several routes fall under a service, and several services fall under a pc, etc.
Attached is a copy of my data and i want to find the mode of each months data without typing it out into long hand form, eg. 111122222333344444 etc. so i believe the answer will be some where around 5 for most of them, but i just don't know a formular to show it automatically on the spread sheet.
View 2 Replies View Relatedsee the attached below.
A few things to sort if I may
How do I get the listboxes to pre-populate based on the Userid and Option Button selection? Furthermore, write back to the correct cell once the selection has been made?
How can I get the combobox to remove blanks in the Userid? (if each cell in row2 has to be populated then so be it)
ToolMatrix3.xlsm
I have a fairly straightforward UserForm with 4 listboxes and 4 option textboxes (the textboxes do not need to be a part of the validation I'm needing). I then have a command button that I want to be enabled ONLY if ANY of the 4 Listboxes have a selection. I've tried the "Change" event code below and it works upon the first selection of any listbox item.
However, if the user de-selects all selections in the listboxes (i.e. they are all unchecked), the command button remains enabled. I need the validation logic to enable/disable the button to persist as long as the user has the form open and if there is not a selection in ANY of the listboxes. The reason being is that if they click the command button it will update the cells in the worksheet, which if empty may overwrite previous work completed with blank cells.
I would like to do is have 2 listboxes. In the first listbox I would like the name of all the worksheets which contain the words "elective class: " in cell C7.
In the second listbox I would like the name of all the worksheets which do not contain the words "elective class: " in C7. I need this only to source from worksheet 7 onwards however.
The listboxes are called ListBox1 and ListBox2 respectively.
Also I am using this to print and I have a button which currently selects all the data in the first listbox and another button which prints all the selected data. The code being used for this is: