Format Cell To Be Normal Color Unless Cell Left Of It Not Empty

Apr 23, 2014

How to format a cell to be normal color unless cell left of it is not empty and this cell is empty.

And I need to format whole sheet to this rule.

View 1 Replies


ADVERTISEMENT

Formula To Add A Value To A Cell - Based On Cell To The Left Color

Dec 10, 2013

I would like to add a value to a cell. The value in this cell will either be 1, 2, 3 or 4.

The value of this cell needs to be "1", if the cell to its left is "Red".
The value of this cell needs to be "2", if the cell to its left is "Purple".
The value of this cell needs to be "3", if the cell to its left is "Green".
The value of this cell needs to be "4", if the cell to its left is "Blue".

I believe I need to find the HEX values for the colors, but that is no problem, I just need the formula of the function if you know it.

View 11 Replies View Related

Formula Needed To Format A Cell When Its Value Is 0.2 Less Than The Cell To The Left

Apr 27, 2009

Is it possible to do the following?

if cell A1 = 6 and cell A2 =5.8 (0.2 below A1) colour cell A2 orange

if cell A1 = 6 and cell A2 =5.5 or below (0.5 or more below A1) colour cell A2 red

if cell A1 = 6 and cell A2 =6.2 / 6.5 / 6.8 (0.2/0.5/0.8 above A1) colour cell A2 green

if cell A1 = 6 and cell A2 =7.2 or above (1.2 or above A1) colour cell A2 green

View 9 Replies View Related

Changing Empty Cell Background Color Depending On Different Cell Value

Aug 7, 2014

I'm trying to create a tag with a color border. What I desire is to fill the BLANK cells around the tag, A1:D1 + D1:D19 + A1:D19 + A1:19 in a certain color based on the text value of the cell B11. There are 5 different values, such that if the B11 read Red Sox - the boarder is going to be red, if it reads Houston Astros it will be dark blue, etc..

I have a similar problem with changing the color of the cell based on the month. So regardless of the year, 2014, 2015, 2016, etc... If I use MONTH() function I can just get numbers from 1-12. I want Cell C16-C18 to be certain color depending the date entered in cell C17 such that for each quarter, months 1-3, 4-6, 7-9, 10-12 they are different color.

I have had no luck with conditional formatting (and I also believe that it is good up to 3 cases only). I am decent in logic/programming language but have little knowledge with macro notation and especially how to run them in excel 2013. I do know how to start it alt+F11 and that I need to make sure that code is written under the specific sheet where my tag is located.

View 6 Replies View Related

Highlight Given Color On Left Cell Of Dropdown List?

Mar 19, 2012

Column B contains dropdown list with 7 items in it. When an item is selected from the dropdown list I would like to highlight cell in the column A of the same row. Different color needs to be highlighted for every items.

View 1 Replies View Related

Format Borders Based On Value In Far Left Cell

Jun 9, 2008

Is there a way to format any row in the workbook based on text value in VBA?

e.g. If I type "BLANK" in any row of a worksheet, then the certain cells in that particular row will Format Borders xlDiagonalUp (D:G,K).

View 5 Replies View Related

Excel 2007 :: Conditionally Format Cell To Have The Fill Color Of Different Cell

May 25, 2011

I have a spread sheet and I want to conditionally format rows to be a certain color. That part I'm fine with. But I don't want them to be a set color. I have a "key" of different colored cells that I want to be the fill colors of the formatting. The ultimate goal is that for example the key looked like this

red
blue
yellow
green

then the rows I had would be formatted as red, blue, yellow, and green. But if you were to go into the key and change the first cell from red to purple, then the rows would become formatted as purple, blue, yellow, and green. Obviously I can copy formating by hand using the format painter, but I want it to update automatically.

View 4 Replies View Related

Leave Empty Cell In A Color.

Dec 9, 2008

How is it possible to leave a cell in a set color, if nothing is entered in the cell? And is it possible to merge it with it with existing formulas allready in the cell?

View 4 Replies View Related

Excel - Color Empty Cell After 15 Days

Dec 5, 2013

I have flowing cells in excel:

1
2
3
4
5
6
7
8
9
10
11
12

First row are months (number representing specific month). I would like use conditional formating and color cell below month if that cell is empty and if it is more that 15th of that month.

To be more specific. If we look at last column (since we are already in december). Since today is 04 december the cell below "12" should remain uncolored. But when the date will be 16th of december I want that cell to color orange. Since it is blank. But if there would be a number in it, cell should remain blank even after 16th of december.

View 9 Replies View Related

Fill Color When Empty Cell Filled In

May 6, 2009

I have a spreadsheet that has a bunch of empty cells that I need to fill in. Someone else needs to know which ones I have filled in after I am done. Is there a way that I can have Excel automatically highlight the cell after I put something in?

I know I could highlight the cell manually after I put something in it but if Excel can do this automatically for me, that would be the best as this is a very large spreadsheet and there will be many blanks to fill in. I am using Excel 2003.

View 9 Replies View Related

Some Dates In Format Not Being Converted Into Normal Date Format?

May 23, 2014

I have a some dates in a format which are not being converted into the normal date format. So i made this formula to convert it into the normal date format:

=IF(LEN(B218)=10,(MID(B218,4,2)&"/"&LEFT(B218,2)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=9,(MID(B218,3,2)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=8,(MID(B218,3,1)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,"")))

Formula is working fine except on this type of date "9/9/2013"..i also tried an OR formula with mid but didnt get the desired result.These are the type of dates:

12/10/2013
12/9/2013
9/11/2013
9/9/2013
7/25/2013

View 9 Replies View Related

Run-time Error 1004 (founds An Empty Cell The Value For One Cell Is Copied To The Empty Cell)

Feb 26, 2009

I have a workbook with over 900 worksheets.

The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.

But in one worksheet it stops with the error:

Run-time error '1004'
Application-defined or object-defined error

View 2 Replies View Related

Using A Macro To Paste Format Until An Empty Cell

Nov 27, 2008

I would like a macro that will select the 65536th row to be used to paste format from rows 2 to the last empty cell in column a.

View 5 Replies View Related

Format Column Until Adjacent Cell Is Empty

Apr 24, 2008

I am writing a macro that will format my table automatically. My table will start with 3 columns all containing data on a 1 to 1 relationship (I.e. there are no empty cells until the end of the file). Initially these are columns "A", "B", and "C" but they shift to columns "B", "C", and "D" during execution of this macro. However, my macro formats the table with seven addtional column headings which will eventually contain data though I need to format them prior to populating them. I know my column range is always going to be ("A:J") but my row range will vary on a weekly basis. That being the case, I need to know how to format the cells in these empty columns up to the number of rows containing data in the existing populated columns. For exapmle I would like the macro to format the table in the following way:

1. Insert new column "A" preserving the data in the existing column "A" shifting it to cloumn "B" and set Cell "A1"'s value = "#" --> I have already coded this portion.

2. Set Cell "A2"'s value = 1 --> I have already coded this portion.

3. Set Cells ("A1:J1")'s values = to desried column header title modifying the three pre-existing column headers while aligning the data to center --> I have already coded this portion.

4. Set all column headers to bold 10pt font and shade the headers row ("A1:J1")--> I have already coded this portion.

5. Set pre defined column widths for columns "A:J". --> I have already coded this portion.............

View 4 Replies View Related

Cell Text Color Format - Weekends In Red

Aug 12, 2014

In a cell I have this formula to tell me what day of the week the previous date falls on. =TEXT(J77,"ddd")

I want to know how i can format that column so that weekends are in red.

View 2 Replies View Related

Find Out Format Condition Cell Color?

Aug 4, 2014

I set format condition in range by tool bar(=if formula is yes then display cell.interior.colorindex=3), but I have no idea how to find out (.address) the red colour cells are displayed in range with VBA?

View 5 Replies View Related

Format Color Of Certain Cell If Two Values Match?

Nov 18, 2013

I'm trying to format the color of a certain cell, if two values match.

A1=100
B1="Choose"

I want to format B1 to color RED, if A1=any number, and B1="Choose".

B1 contains list-data where you can chose from different values.

So if A1 contains a value, and B1 has not been set a different value than "Choose", format B1 to RED. Which would indicate that you have to set a value for the rest of the worksheet to work.

View 5 Replies View Related

Macro To Format Half Of The Cell With A Different Color

Nov 28, 2008

I have a list of records that will eventually be used to create a pivot table. Sometimes an account number will be listed twice but instead of adding to the previous info, it needs to start a new record. I decided in these instances to mark the account number with a character (+). Even though the + will designate a separate record, I'd like it to be invisible.

Is there a way to automatically turn the font color white for only the +? Since I've automated the rest of the process using a macro, a VBA solution is fine.

View 9 Replies View Related

Color Format A Portion Of Text Within A Cell

Jan 12, 2010

I have a column of data that contain miscellaneous comments in each of the cells in column 'A'. This is a sample of the text in one of those cells:

The quick brown fox jumps over the lazy dog.
Is there a way to programmaticly search each cell in col 'A' to look for any occurrence of the string 'fox jumps over' and highlite in RED only that string occurrence?

So in the end the above cell would now be:

The quick brown fox jumps over the lazy dog.

View 9 Replies View Related

Format Cells Color Based On 1 Cell

Nov 24, 2007

I want to format a group of cells color based on the value of one referance cell. Example would be: If a1 is adn "X" the the results in cells b1 thru b10 would be green else they would be blue. Is there a way to do this using Excel 97?

View 3 Replies View Related

Format Cell Color Based On Text

Jun 24, 2008

On the attached, I want to make the status 3 lines conditional on the text found in another cell.

View 5 Replies View Related

Using 'IF' With Conditional Format (change Cell Color Based On The 'P' Or 'F')

Apr 28, 2009

My cell has a 'P' or an 'F' plus some additional text. I'm trying to change cell color based on the 'P' or 'F' but I can't get it to recognize the letters.
Samples of what I've tried:
=IF(LEFT(L23,1)=P)
=IF(MID(L23,1,1)=P)
etc.

I can 'FIND' the 'P' or 'F' but there may be a P or F else where in the cell so the color may come up incorrect. I'm trying to get it to just look at the first character in the cell. Can the 'IF' be used with CFs?

View 5 Replies View Related

Format Color For Range Of Cells Based On Cell Value

Jul 1, 2008

I have been tasked with creating a Macro in order to help speed up a rather simple set of steps that are taken to format a spreadsheet each day. The last step, however, is not so simple. I would like to add a statement to the macro code that does that following:

Based on the value of a specific cell, color the cell and all corresponding cells within the same row (from colums A to AA) yellow. Essentially, cells in column D may have a the value "No Allocation", and if they do, I will need to format that cell yellow as well as all the cells within the same row for the colume range A to AA.

View 9 Replies View Related

Format Cell Color Based On Others Cells Not Being Blank

Jan 9, 2008

I know that I need to use Conditional Formatting, but I can't get the formula code correct.

This is what I need it to do:

If cell A2 is populated (not blank) AND cell B2 is blank, then cell B2 to be highlighted in bright red fill.

If cell A2 is populated (not blank) and cell B2 is also populated (not blank), then leave formatting as per normal

If cell A2 is blank then leave formatting as per normal

Basically, as soon as someone types anything into cell A2, cell B2 to turn red. Then once they have input something into cell B2, the red highlight can disappear. The inputs will be text, not numbers, so I can't use </>

I have tried varying circumstances of IFs, ANDs, NOTs, ISBLANKs etc and I can't crack

View 5 Replies View Related

Excel 2010 :: Shifting Cells Left And Then Up If Left Cell Is Blank?

May 8, 2014

I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.

To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.

Current data structure looks like
Variable 1
Variable 2
Variable 3

[Code].....

View 9 Replies View Related

Format Row Cell Color Based On Number Of Text Strings In A Column

Jul 29, 2013

I have been trying to format the rows on this sheet to color scale red based on the number of repeat text strings in Column E. Referring to the attached example sheet, '321/312.2/321.3' appears the most times and the goal is to color code the rows it appears in the deepest shade of red, then the next highest occurring string would shade the rows it appears in a lighter shade, etc, in descending order. Our team currently does this across multiple sheets manually everyday and it would be a real time saver if we could get excel to do this automatically.

View 14 Replies View Related

Conditional Format Color Of Cell Based On Values In Range Of Cells?

Oct 24, 2013

I would like to format the color of cell A1 on Sheet 1 based on true or false values from cell range A1:A10 on sheet 2. For instance:

1. If all cells on sheet 2 in range A1:A10 were false then cell A1 on sheet 1 would be red.

2. If some cells on sheet 2 in the range A1:A10 were false and some were true then cell A1 on sheet 1 would be yellow.

3. If all cells on sheet 2 in range A1:A10 were true then cell A1 on sheet 1 would be green.

View 5 Replies View Related

Change From Serial Number To Normal Format

Jan 5, 2009

I have been trying to type a date in a column in MS excel. But excel always reads it as a serial number.

How Can I get it to display the date as it is in date format. I have the next column formatted/ formulated to display the day of the date in the previous column.

View 9 Replies View Related

Copy & Append To Report, Rows From Multiple Sheets If Any Cell Meets Format Color

May 1, 2008

I've seen a few threads on here about this issue but none of them do quite what I am looking for. I'd like for a single page "report" to be created when a user presses a button (which runs a macro, of course) The macro should be able to run through certain named sheets (even if hidden) and if a cell in any row is red within a sheet then the entire row or rows that meet the criteria should be copied and pasted into the Report sheet.

On the report sheet, for each sheet that has had rows that were copied, I'd like to have the name of the sheet as the header above the pasted rows so that the user knows which sheet the data came from. Any sheet that doesn't have red cells would be excluded from the report. I've attached a sample file but had to limit the number of sheets because of Orgrid's file size limit. Hopefully, you'll see what I am getting at here.

View 8 Replies View Related

How To Validate If Left Cell Value And Left Cell Above Value Are Not Same

Sep 16, 2013

I have a column that is giving unwanted value . dont know the reason as that excel file has been created by some other guy and I just started working on it .

My Question is how to move to 2 cells left(A for example) from from that unwanted value column. and check if
A is equal to cell above it , means B Cell(Row above A but same column).

As my excel file is totally based on Forms, Macros, I am not quite familiar with macros.

Is there any way to put if condition in one cell (column) and drag it all the way down which should work for all the values in these 3 column.

And also if A=B then I want to make that unwanted value cell="".

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved