Is it possible to apply formatting to a formula in a cell when you are combining that formula with text? As an example, I want to format the following as a percentage: ="The result is"&" "&(a2/a1)
Currently, it is returning [e.g.] ...result is 0.5, instead of ...result is 50%
Trying to create a button that, once clicked performs the following task:
Checks whether the text in a cell in the column X2:X40 matches the text in a cell in the Range A2:U14.
If it does, the formatting of the cell in X2:X40 (eg background) must change to match that of the corresponding cell in A2:U14.
Only 1 cell in the range will match 1 cell in the column
For example:
Before click:
Cell A9 has "John" written in it and a yellow background
Cell X4 has "John" written in it and a clear background
During click:
matches these cells
changes X4 so that it also has a yellow background
After click:
Cell A9 has "John" written in it and a yellow background
Cell X4 has "John" written in it and a yellow background
I have prapared a formula for B2,B3 and C2,C3 and the reult came in B10,B11,C10,C11 and D10,D11,E10,E11.
From that relust i want to get the final result should be as follows.
B10 should again divided in to anil(in one cell) and 16/12/2013 11:33:50 (in another cell). This formula to be added in B10,B11,C10,C11 and D10,D11,E10,E11 formula.
I loooking for the final reslt, i have explain the in the excel. I reuired the final result with single formula from B2,B3 and C2,C3.
I am trying to set some conditional formatting, but for some reason on of the conditions is not working and I was wondering if anybody know how -
View 3 Replies View RelatedLet's say that I want cell B1 to autocopy cell A1, I will use =A1. However, let's say that the text in A1 goes as follows "text in bold and text not in bold" , what formula must I use so that it reproduces the exact same text formatting?
View 1 Replies View RelatedI am trying to generate a formula for formatting text that will remove all spaces, comma's etc. Examples as follows:
The Bank Job -> the _bank_job_small.gif
Picture This! -> picture_this_small.gif
War Games: The Dead Code -> war_games_the_dead_code_small.gif
Chacun son combat (Never Back Down) -> chacun_son_combat_small.gif
I've figured out a formula that works but it seems overly complex - it uses multiple SUBSTITUTE, SEARCH and REPLACE functions. Is there an easy way to remove a range of symbols i.e. ! : ( ' ?
My formulas is
="Start Date: " & VLOOKUP('Project Information'!$C$4,Sheet1!A285:T285,19,0) & "
End Date: " & VLOOKUP('Project Information'!$C$4,Sheet1!A285:T285,20,0)
The results I want are Start Date: MMM-DD-YYYY End Date: MMM-DD-YYYY
What I am getting is: Start Date: 41537.7083333333 End Date: 41537.7083333333
So excel is give me the numeric values of the date instead of the formatted date. I tried to format the cell as date, but as I expected that didn't work because the cell also has text in it.
I need a formula for conditional formatting which highlights a row if A has the text "Ex" and B has "Paid".
View 2 Replies View RelatedI have one column that contains a monetary amount (column AQ) , and another that contains text reading either "inflows" or "outflows" (column AC)
When AC says "inflows", AQ should be positive, and when AC says "Outflows", AQ should be negative.
I need the text in column AQ (the monetary amount) to become red when the the opposite is true.
i.e. When AQ is negative and AC says "Inflows", AQ should become red. And when AQ is positive and AC says "Outflows", AQ should become red.
I am using Excel 2007. I want to put into a cell the symbol for the mean of a set of x values ie x-bar or x with a line over it. One way is to go to Word and use the equation builder, then copy it into Excel. However that restricts me to the default equation font, and I would prefer to be able to use my own choice of font. Is there a way to do this within Excel (perhaps by somehow combining two symbols, the x and a raised bar)? Alternatively can I do it within Word, without using the equation builder, and then copy it to Excel?
View 2 Replies View RelatedBut the import tool I am using for one of our applications is requiring us to save using Excel 97-2003 Workbook. I have converted a couple coulumns to text, but inorder for the upload to take, I have to add an spostrophe infront of the number to make it "text" and upload cleanly. I want to do a find and replace to edit the columns with all the differing numbers. How do I do that? I tried to replace ?????? with '?????? and it doesn't work...
View 3 Replies View RelatedI have a table that has dates starting from A6 which is a whole month say 01/2/2013 to 28/02/2013 like a gantt template.
I need if the word "Ordered" is in B5 I need X (crosses) in the date cells starting from B6 to end of month until someone changes B5 to Delivered then I need the X to disappear.
test.xlsm
[URL] ....
Without using a copy/paste macro, is there a way to display the text and its formatting from another cell? Obviously, the usual formula "= A2" only brings the text from that cell. Example:
A3: un-am-big-u-ous
G4: = A3 (but I want the font formatting used here as well)
I'm basically trying to copy the text and formatting (colour fill) from a single cell into all cells I select. So far I managed to get the auto fill to work but the text only copys to the first cell I select of the selection.
Here's the macro I have:
Sub Macro7()
'
' Macro7 Macro
'
' Keyboard Shortcut: Ctrl+f
'
ActiveCell.FormulaR1C1 = "1 Completed"
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.Color = 5287936
.TintAndShade = 0
.PatternTintAndShade = 0
End With
End Sub
Is it possible to insert text an a cell value in conditional formating, i,e Ive got the conditional formatting:
=AND(H$4>=$B5;H$4<=$C5)
I want to insert this text whenever this condition is true once and not to repeay it:
="Load " &TEXT(G$5;"dd-mmmm") -- where G$5 is a vallue cell_
I have a cell that contains numbers and text.
example: 1-2-3-4-5-6 or 1-22-3-44-5-6.
If the the number between the dash '-' is a single digit (less than 9), I want to insert a leading zero so all 6 numbers are 2 digits.
Is this possible with custom formatting? I tried a custom for of:
00"-"00"-"00"-"00"-"00"-"00
and it is not working.
I also tried using a MID formula but it gets quite complex identifying the location of the dash - is there an easier way than the MID or LEN?
I need to be able to assign colors to cells depending on what text is inputted.
If a name start with letters between:
A - Cald (I want the cell to be Yellow)
Call - Eg (I want the cell to be Black)
Ek - Hall (I want the cell to be Red)
Etc.....
I would like to have cells in a certain column turn green if the word in column J of the corresponding row = Not Changed".
View 4 Replies View RelatedHow can I get cells in a column to be highlighted if the cell contains anything other than the word "approved"?
View 5 Replies View Relatedthis formula =H5*I5*J5/144*G5 in "M5" gives me board feet. I have another cell, "K5", with the species of wood in it using data validation and a species list. How can I format the color of "M5" based the value of "K5"?
View 9 Replies View RelatedA2:A5 contains different dollar amounts, a6 is the sum of those amounts
In column B (B2:B5), i place a "p" beside the amount in column A once it has been paid.
I want to:
a. conditionally format the amounts in column a to turn green once I put the 'p' in the adjacent column
b. conditionally format the sum in A6 to exclude amounts that have been paid, and only display the total amount of the unpaid lines.
I have one cell with $20,000 hard coded (cell A1). In another cell I want the cell to say "20,000 Capital Raise" (cell B1). And i want B1 to link to A1 so that if i change the number in A1 it will also change in B1.
Here's what i have in B1 so far: ="$"&J6&" Capital Raise"
This produces "$20000 Capital Raise" in cell B1.
So the only thing i'm trying to figure out is how to get the comma in the $20,000 so it will read "$20,000" instead of "$20000".
1 2 3 4 5 6
1
2 x x x x
3 x x
4 x x
5 x x
6 x x
Assume that is the table i have. In row 1 i need conditional formatting such that if any of the columns contain an x the first row should be color coded. In my above example every column in row 1 will be color coded expect for row 1 column 6 since there are no x's for any any row in column 6.
How can i do this in excel.Also instead of x's if i have manually entered color can we do the same ?
A1=text A2 will either be "yes" or "No"
What I want to do is format A1 by either a fill colour or text colour. Any type of format I guess. If A2 is "Yes" then A1 is green and If A2 is "No" then A1 is red.
This is the most simplest conditional formatting which is working except on some cells. I want to compare two columns cells ex : if A=B , then format A as green.
Its working, the "formula" and "cell value contains" everything except for few cells. Cell B has formula's in it related to other cells. When i enter values in other cells, Cell B computes but A refuses to format "green".
If I just enter same value[ex 1, 1]in both the cells sans formula ,it highlights A green . I want to know , if the formula in cell B is causing the errors in formatting and if it is
I downloaded the checkbook register from Microsoft.com and am trying to add a
few cells at the end to quickly calculate my outstanding debits and credits
so that I can balance my statements automatically. I figured out how to write
the formula properly (eventually), but the cells will not take on the
currency format no matter what I do. I have tried pasting the format from the
other cells within the register, tried clearing the format and reapplying the
currency format, tried accounting, etc.
I have a cell that has a conditional formatting of Cell Value< 90 the cell value is based off a formula which is
=LEFT(E48,LEN(E48)-1)
which when it comes out to me less then 90 I need it to color red. But it does not is there something that I need in the conditional formatting to tell that its a number?
How to customize a format or a formula in a cell in order to :
multiply by 2 any edited value in the cell .
Ex: by entering the nbr 3 and clicking enter the cell will result nbr 6 .
I would like to know the formula to highlight the color of text in particular cell if the value of the particular cell ( value is text ) is so and so.
For Ex: If the J6 is "Vacation" then the J1 text should be in red color.
I have an excel spread sheet & I wish to highlight any cell that contains any of the following characters with in a string of text.
/ : * " < > ? |
E.g. a cell in the spread sheet containing the text "Is this a Question?" would be highlighted.
I have tried to use - 'Format only cells that contain' > Specific Text > Containing > for each of the characters and this does not work.
When I do this any cell containing any text is highlighted.
In addition there is formatting on any cell > 60 characters which turns the cell red and this works fine.
What would happen if (when I get the problem above resolved), a cell is > than 60 characters & contains a character listed above?
Does 1 formatting take precedent over another?
(Not critical to know the answer to the additional question, just curious - as long as it is highlighted one colour or another then no problem.)
