Formula For Formatting The Text Columns?
Dec 31, 2013
I have prapared a formula for B2,B3 and C2,C3 and the reult came in B10,B11,C10,C11 and D10,D11,E10,E11.
From that relust i want to get the final result should be as follows.
B10 should again divided in to anil(in one cell) and 16/12/2013 11:33:50 (in another cell). This formula to be added in B10,B11,C10,C11 and D10,D11,E10,E11 formula.
I loooking for the final reslt, i have explain the in the excel. I reuired the final result with single formula from B2,B3 and C2,C3.
View 3 Replies
ADVERTISEMENT
Jan 5, 2010
I've got some time values in an Excel Sheet in the format hh:mm:ss. I need to split them into columns (including the colon) like below:
hh: | mm: | ss
I can do this manually using text to columns but when I use text to columns in my macro, it automatically changes the time format to h:mm:ss PM
View 2 Replies
View Related
Apr 8, 2014
I have to format huge text file to columns. Here is the file: [URL] The whole file should look like the first 15,16 rows. What is the fastest way that can be done? Here is the original file: [URL]
View 3 Replies
View Related
Jul 16, 2014
I have a text file that I need to open in MS Excel 2007. The file contains the following data. (Each column is delimited by the "|" character.)
Part #|Inventory ID
1743|213,221
1864|10,40
1948|1170,1180
5265|100,104,107,10004
Ultimately, I need three columns but the data needs to look the same as it did before I opened the file.
When I open the file for the first time, I use “Text to Columns” to delimit the fields by the "|" character. The problem is that the Inventory IDs in the middle column get a bit whacky.
Here's what I'm left with:
Part # Inventory ID
1743 213,221
1864 10,40
1948 11,701,180
5265 10,010,410,710,004
The comma is retained appropriately when there are two 2- or 3-digit Inventory IDs.
When a row has multiple, longer Inventory IDs or Inventory IDs that vary in length, the comma is moved to every 3rd decimal place.
I tried putting quotation marks around the data before I opened the text file for the first time but that didn’t do anything. I tried Custom Formatting to retain the comma position (0000,0000) but this only worked when I had two 4 digit IDs. I also changed the number type to Text and General. Once the comma was changed, I couldn’t figure out how to get it back.
How to best retain the format of my Inventory IDs.
View 6 Replies
View Related
May 8, 2013
My data is in column A. I need to have the data as in column E and F. Column E is the field names.Rows can be up to anywhere and may very.
Excel 2007
A
B
C
D
E
F
View 8 Replies
View Related
Jul 27, 2009
I have a column "g" with this conditional formatting:- =A2<>A3 Format Bottom Border.
However I will pass this workbook onto someone else who will fill in the text in column "g". They will use copy/paste text from other cells or columns even other workbooks that will not have the conditional formatting.
I have used Cells > Projection > Locked unchecked then used Tools > Protection > Protect Sheet and checked all. There does not seem to be a way to unlock the cell but protect Conditional formatting. Each time I copy and paste from other non formatted cells it wipes out my formatting.
View 4 Replies
View Related
Sep 16, 2009
I am trying to set some conditional formatting, but for some reason on of the conditions is not working and I was wondering if anybody know how -
View 3 Replies
View Related
May 16, 2014
Let's say that I want cell B1 to autocopy cell A1, I will use =A1. However, let's say that the text in A1 goes as follows "text in bold and text not in bold" , what formula must I use so that it reproduces the exact same text formatting?
View 1 Replies
View Related
Sep 8, 2008
I am trying to generate a formula for formatting text that will remove all spaces, comma's etc. Examples as follows:
The Bank Job -> the _bank_job_small.gif
Picture This! -> picture_this_small.gif
War Games: The Dead Code -> war_games_the_dead_code_small.gif
Chacun son combat (Never Back Down) -> chacun_son_combat_small.gif
I've figured out a formula that works but it seems overly complex - it uses multiple SUBSTITUTE, SEARCH and REPLACE functions. Is there an easy way to remove a range of symbols i.e. ! : ( ' ?
View 9 Replies
View Related
Jun 29, 2006
Is it possible to apply formatting to a formula in a cell when you are combining that formula with text? As an example, I want to format the following as a percentage: ="The result is"&" "&(a2/a1)
Currently, it is returning [e.g.] ...result is 0.5, instead of ...result is 50%
View 7 Replies
View Related
Mar 6, 2013
My formulas is
="Start Date: " & VLOOKUP('Project Information'!$C$4,Sheet1!A285:T285,19,0) & "
End Date: " & VLOOKUP('Project Information'!$C$4,Sheet1!A285:T285,20,0)
The results I want are Start Date: MMM-DD-YYYY End Date: MMM-DD-YYYY
What I am getting is: Start Date: 41537.7083333333 End Date: 41537.7083333333
So excel is give me the numeric values of the date instead of the formatted date. I tried to format the cell as date, but as I expected that didn't work because the cell also has text in it.
View 2 Replies
View Related
Jan 8, 2014
I need a formula for conditional formatting which highlights a row if A has the text "Ex" and B has "Paid".
View 2 Replies
View Related
Apr 4, 2014
I'm trying to create a formula for text to columns if a SKU is put into a box.
Ex) I put code 5495307H7G-**--A into cell A1. I need to split it after specific positions, so it breaks into nine individual codes (9 cells) in the adjacent boxes.
549 53 07 H 7 G- ** -- A
I've seen formulas for searching for spaces and splitting, but is there a way to split one long code at specific points?
View 5 Replies
View Related
Jun 13, 2014
How to make a formula to convert a string of text like below. The first row is all contained in cell B2, the second in B3, and third in B4.
A*01:01:01:01/A*01:01:01:01/A*01:01:01:02N/A*01:01:01:02N/A*01:01:51/
A*01:17/A*01:01:01:01/A*01:01:01:01/A*01:01:01:01/A*01:01:01:01
A*29:01:01:01/A*29:01:01:02N/A*29:01:01:01/A*29:01:01:02N/A*29:01:05/
A*29:20/A*29:01:02/A*29:01:03/A*29:01:04/A*29:01:05
0/0/0/0/0/0/1/1/1/1
As you can see, I want to use text to column by "/" as a formula to basically have 10 cells autopopulate from C2-4 to M2-4.
I understand that people suggest using left, mid, and right, but to my knowledge it seems like this would only work on text to columns with 3 items. I have 10 items in each row that should be split by "/" .
View 3 Replies
View Related
Nov 6, 2008
In the last column of this workbook, you'll see a cell that says "=D2". Whenever I type a formula into this worksheet, it doesn't calculate.
If I select that cell and do text to columns (making sure to remove any separations if it tries to split it), then the formula calculates.
View 2 Replies
View Related
Dec 9, 2006
I got a question regarding a what formula can i use to act like the Split method in programming. I would like if this can be done with a formula not programming cos i am a programmer Basically i got a column full of data in the following format:.dddd.ddddddd.ddddd. Now the number of the "d" can be random in between the dots. So i would like to be able to split the line by looking at the "." .There is one thing though that each line does have 3 or 4 "." characters.
View 3 Replies
View Related
Aug 13, 2014
I want to split a cell with a formula and not use text to columns. I will have a cell a1 for example with 1d 4h 36m 34s in and want to have 4 formulas 1 in
a5
a6
a7
a8
.. so the result will be
1
4
36
34
I know you can split with left, mid and right but don't know how to do it with the desired results.
View 7 Replies
View Related
May 12, 2014
I have three columns that each have a drop down of text options; column A has three options, column B has three options and column C has two options. I want to have a fourth column that will show a text value dependent on the combination of the three columns.
It ends up being 18 variations so my IF formula just won't compute.
This is basically the format I have and works for a few values then just chucks up an error when I extend it to all 18 variations:
IF(AND(A1="text",B1="text2",C1="text3"),"show this text",
IF(AND(B1="other",B1="other2",C1="other3"),"then show this", ) etc etc
Any way I can get this to work for all 18 possible outcomes??
View 6 Replies
View Related
Nov 21, 2007
I have a macro which imports data from a mainframe dump text file and performs 'Text to Columns' on the imported data so that formula in the spreadsheet can act on the data. The code works perfectly well when I use it, but if a different user logs on and performs exactly the same mainframe dump and import macro the Text to Columns action splits the raw data in a different way and the result is that the split renders the formulae useless.
I've experimented a little and for some reason it appears that the 'Field Info' parameters which are produced when the Text to Columns function is recorded in a macro differ between users even though the raw data is exactly the same.
FieldInfo:= _
Array(Array(0, 1), Array(18, 1), Array(35, 1), Array(56, 1), Array(70, 1), Array(88, 1), _
Array(102, 1))
View 6 Replies
View Related
May 13, 2008
I would like to rows based on multiple column conditions criteria. ie., if the columns N, O, P values are "", then hide the particular row. The logic given in the website here, i tried But, it is not 100% working. It works for a few rows at the start of the database & it works for the rows at the end of the database. In between, for a few rows, even if the column values are "" it does not hide those rows.
View 2 Replies
View Related
Aug 19, 2008
I have a workbook with numerous worksheets that contain text, steps actually. I would like to select all common words and change their formatting to bold. Every time I try however, it formats the entire cell in bold. Is there a way to isolate just the word "click" for instance in all the cells in each worksheet and change the formatting to bold, and leave the other text within the cell normal?
View 9 Replies
View Related
Apr 9, 2014
how to set one entire columns text to two different colors based on another columns values. So for example I have column A and B. Column A has two values called Internal and External. Column B is a title table so the entire column is just titles. We'll say it goes for 20 rows if you need a row count. What I am looking to do change the text in Column B to Red for External and Blue for Internal. I tried the conditional formatting and I just can't seem to find the right option.
I'm using Win 8.1, Office 2013.
View 4 Replies
View Related
Oct 7, 2009
I true Excel novice here-
We have a BUNCH of data we need to get in to a spreadsheet format-
can anyone kindly tell me how to do the following
985-0050
3PAR ADVANTAGE, PRICE PER NODE FOR 4, 6,
3PAR ADVANTAGE, PRICE PER NODE FOR 4, 6, AND 8 NODES
$14,876
we want the data to go from 4 seperate rows to four new columns
PART NUMBER, DESC1, DESC2, PRICE
View 9 Replies
View Related
Feb 28, 2013
how to Chk the text string in particular cell, compare it with a super set column and get the full from of the text string from another corresponsing column and the output will be corresponsing full form of the chked text string?
View 6 Replies
View Related
Oct 13, 2008
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
View 4 Replies
View Related
Apr 8, 2014
I have the cell data as below
How would I split into a new column the first part which is a date into a new column, then the country and the remainder into separate columns?
I still want the original data as I need to check that the splits worked well?
16.5.90 CH 1671/90-4
18.10.1991 CH 3056/91-1
24.07.92 ch 2341/92-2
30.7.92 ch 2395/92-3
18.11.92 Us 3533/92-5
26.5.93PCT 1577/93-0
9.8.93 CH 2363/93-8
17.8.93 CH 2445/93-0
25.1.94ch209/94-6;8.12.94ch3714/94-1
25.1.94 ch 209/94-6 ; 8.12.94 ch 3714/94-1
8.4.94 ch 1047/94-0
22.4.94 ch 1255/94-7
18.11.1992 CH 3533/92-5
18.11.1992CH 3533/92-5
View 2 Replies
View Related
Mar 9, 2014
I'm trying to move multiple ROWS to COLUMNS. My data looks like this:
ID CLASS_NBR1 UNITS_TAKENGRADECLASS_NBR2UNITS_TAKENGRADE CLASS_NBR3
000555 688 1 A
000555 567 3 B
000555 888 1 C
000555 999 1 B
000555 889 3 C
101999 889 3 A
101999 567 1 B
I have between 4-9 rows that I'm trying to move to columns. I'm attempting to move data for each student on one row, currently each student has between 4-9 rows.
I've tried so many different formulas and MACROS that didn't work I started doing this one by one (manually) but I have too many rows and it's taking too long.
View 14 Replies
View Related
Dec 31, 2013
I wish to have one conditional format apply to K and L. Presently it's L only where it works.
=OR(K1="",AND(K1="No",L1<>""),AND(K1="OJ",L1=""))
Why when I change the range from =$L:$L to =$K:$L does it not apply to both?
View 3 Replies
View Related
Jun 27, 2014
I have a conditional formatting issue, using VBA.
My conditional formatting code works fine for one column; however, when I try to apply the conditional formatting to two columns, the code only applies to the first column listed. Additionally, I have two sets of "rules" that apply to the same column. One of the "rules" includes two columns. The other rule applies to only one column. I'm not sure if this is my issue, or whether I'm trying to apply the same code to two different columns.
My code is below.
Code that applies to column "M" only...
View 3 Replies
View Related
Mar 22, 2009
I have ammended the colours to 4 colours that I need for a risk assessment tool . I have added a second worksheet and put a dummy sample of my table there. Can you help me with how to put two colums of conditional formatting in the sheet? The risk rating before and that after the risk treatment? Many thanks in anticipation. I have highlighted in yellow the columns where the product of the consequence and likelihood is likely to be and this is where the colour coding needs to be applied. if you can help with putting the solution in the spread sheet that would be a great help. Any reply via this forum or via my email would be greatly appreciated.
I am new and I hope I have not made a mistake in starting a new thread. Sorry if I have but I wanted to bring this up as a new post so I get a sooner response.
View 9 Replies
View Related
