Formatting Numbers In Textbox On Change Or After Update

Jun 29, 2012

A text box on a Userform inputs numbers to a cell in a worksheet. I want the number to appear in the text box formatted #,##0.00 However, if I include the line

csDepositTextBox.Value = Format(csDepositTextBox, "#,##0.00")

in either the csDepositTextBox_Change or _AfterUpdate events, it causes the number to be stored as text in the worksheet. Curiously I can put the code in the corresponding event for another textbox and it does not corrupt the formatting.

View 3 Replies


Formatting ActiveX Textbox For Phone Numbers And Dates

Aug 28, 2012

I have several text boxes on a 'picture' which is the format for a business review. The text boxes are linked to cells behind the picture which picks up company names, cities etc...

Two of the boxes have a phone# and date

The linked cells are formatted correctly but obviously the text boxes, pick up the 'values' not the formats.

is there any way for the textboxes to show the values with the proper format i.e.,

mmm yyyy

View 2 Replies View Related

Formatting TextBox And Check Which TextBox Is The Active TextBox In The Loop

May 18, 2006

I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")

If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!

View 2 Replies View Related

Automatically Update Only With Numbers (ifnumber-update And Go To Next Cell)

Oct 18, 2013

Let's say that in column A I have numbers,"Yes" and "No". I want in column B to have only the numbers from column A, in the same order without any empty ranges, and everytime I add in column A a new number, column B to update automatically with that number. Let's have an example:

Yes 12
12 13
No 10

And if I want to add in column A:
Yes 12
12 13
No 10
13 25
No 15

So the column be will update automatically. I already tried =IFERROR(INDEX($A$1:$A$10,SMALL(IF(ISNUMBER($A$1:$A$10),ROW($A$1:$A$10)),ROWS(B$1:B1))-ROW($A$1)+1),") but using this many times get's my file very heavy and the excel is working slow.

View 13 Replies View Related

Conditional Formatting Userform Textbox Based On Textbox Value?

Jul 3, 2014

I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):

[Code] ........

What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.

View 3 Replies View Related

Textbox Auto Update

May 11, 2009

Iím just starting to learn the VBA process with Excel, this problem is probably very basic so forgive me.

I have a cell in excel that is linked to a textbox, if you add text to the textbox it will update the cell. If you close and reopen the application you need to click the textbox to show the value previously added to the cell, can this be viewed automatically.

Here is my

View 6 Replies View Related

Update Textbox From Macro?

Mar 17, 2012

I am trying to update a text box from a macro. The text box is outside of the chart area. I am using these two lines and it is not working.

ActiveSheet.Shapes("Text Box 2").Text = strSql ' a string variable

View 7 Replies View Related

Set Focus Not Working On TextBox After After Update

Mar 30, 2014

I am creating an Add Contact form. There is a checkbox for Individual (if left unticked then contact is a business entity - not an individual).

If Individual = True and If the txtNameFirst control has no value in it Then after the end user tabs away from the txtNameLastRegistered, the form should SetFocus on the txtNameFirst textbox (entry for this field is mandatory only if the contact is an individual - otherwise this field is made invisible)

But it is not working. I tick chkIndividual, I enter a name in txtNameLastRegistered, I tab away, code is called from txtNameLastRegistered_AfterUpdate (which includes the SetFocus code) but the form appears without focus in any of the controls!

My code below:

[Code] ......

View 8 Replies View Related

Update Textbox In Parent Frame

Dec 1, 2006

The code below works really great which Andy helped me with, but now I've put the textboxes that are changing in a frame. That is because I need to scroll the textboxes. That works in another form I've got, but for this form I've also got the textbox, TBSum601, which is updated from the sub UpdateTotal() (see below). BSum601 is placed on the form but not inside the frame. When I run the application it stops in Sub TxtGroup_Change() at the line: TxtGroup.Parent.UpdateTotal
I think it's because of that the textboxes for the TxtGroup now are in a frame instead of as before, on the form. don't know exactly what the "Parent" does, but I think it's something I have to do with the code there.

Originally Posted by Andy Pope
Class event
Private Sub TxtGroup_Change()
If Me.TxtGroup.Text = "" Then
Me.TxtGroup.Text = 0
End If
End Sub

Public Sub UpdateTotal()
Dim lngTotal As Long
Dim lngIndex As Long
For lngIndex = 1 To UBound(X) / 4 ..................

View 2 Replies View Related

Update UserForm Textbox To New Active Cell?

May 14, 2014

I am working on a addin UserForm to quickly format cell text, especially only select characters in a cell. I have this functional in a modal setting working with the active cell when I activate the UserForm. What I would like to be able to do is to work in excel without having to close the Userform and have the textbox update with each new cell. I have changed the UserForm properties to ShowModal = false which gets the first half. However the textbox will only show the cell value I started with.

Private Sub UserForm_Activate()
TextBox1.Text = ActiveCell
End Sub


View 3 Replies View Related

How To Set Label Caption To Update Once Textbox Value Is Changed

Feb 26, 2013

I have two text boxes on a userform that are used to populate a label caption based on the textbox values. How do I set the label caption to update once a a textbox value is changed?

View 2 Replies View Related

Update Label On Userform Calculated From Equation Using Date In Textbox

Jan 12, 2013

I need to write some code to update a label everytime the textbox data is edited. I have this code so far but it is returning an object error. NineV refers to the text box and and ninelabel refers to the label. This is the code:

Private Sub NineV_change()
Dim nivevalue As Integer
ninevalue = (((GP / 31.1035) * 0.255) * NineV.Text)
NineLabel.Caption = "£" & ninevalue
End Sub

View 1 Replies View Related

Update Data By Ado - Change/delete Data And Then Run Macro For Update Data In Source Spreadsheet

Dec 6, 2006

I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.

Sub UpdateItem
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
End Sub

It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used

.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0

after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).

View 2 Replies View Related

Bank Statements - Formatting / Cell Formatting Won't Change?

Mar 22, 2013

I'm trying to analyse all of my bank statenments to see where all my money went!! I've got online banking so I thought it would be a relatively easy process of copying and pasting each month into excel.

Well, that in itself was easy, the problem is with the formatting of the financial numbers. Excel doesn't seem to recognise them as numbers, so at the moment I can't do any manipulation with the numbers. I have tried everything such as:

Format Cells > Number > Number and Currency
Copy and Paste Special > Values only
Copying into Notepad and back into Excel

Even if it appears to have changed the numbers to 'number' or 'currency' formatting by right justifying the numbers, if I try to add up the numbers using the SUM function, it doesn't want to know.

For some reason nothing seems to work - what am I missing?

For an example, I have attached a snippet of the spreadsheet with my starbucks transactions.

View 3 Replies View Related

Cell Formatting Won't Update

Jun 27, 2006

My problem is the data and getting the formula's to read it. I copied and pasted the data from a pivot table and the columns are set to accounting two digits. But thats not what
shows in the cell. Each cell shows many digits. The formulas are working
now if I put the curser in the cell and select return. The values then
update to the accounting format it is supposed to be already and everything
works fine.

View 12 Replies View Related

Conditional Formatting Does Not Update

Feb 23, 2010

Excel 2007 - Windows XP.

I have a file with a column with conditional formatting that works. I save the file and when I open it again some of the cells in that column do not respond to the conditional formatting. I have 5 "sheets" in the file with the same conditional formatting and none of them work properly.

I am using "Use a Formula to determine which cells to format" and I have the below formula.

=OR(EXACT(E3,$V$5:$V$18)) It applies to cells =$E$3:$E$79

The only way I can get it to update after opening the file is to "Edit" the rule then just hit OK twice.

View 9 Replies View Related

Excel 2010 :: Formatting Numbers Written In Text To Numeric And Pulling Only Numbers Out

Feb 20, 2013

I am extracting data from a website to excel 2010. my problem is the data contains both text, numbers, and sometimes a combination of both.

e.g. hi im ron for more information you can reach me at 6 five 6 four 5 seven 7 three 2 two..

I need it to look like this 6564577322 or 7 * 0 * 2 * 4 * 5 * 6 * 8 * 6 * 2 * 1...i need to look look the same

How do i first format the numbers written in text into numbers and then show only the numbers in a cell minus the text?

View 3 Replies View Related

Detect Numbers In A Cell Range And Then Change Cells Based On What Numbers Are Found?

Feb 27, 2014

I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.

What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.

View 7 Replies View Related

ComboBox Change Vs After Update

Jan 27, 2009

Although I can live with having a Sub run when setting the ComboBox Sub to AfterUpdate...I would really prefer it to be set to _Change. Here is the Sub code that runs after the event:

View 4 Replies View Related

Update On Sheet Tab Change

Jun 29, 2007

I have set up 2 sheets with one called "2007" and the other called "Updt" What I would like to do is when I change the value in "2007" Tab to say "2008" or "2009" etc. it would update corresponding cells in the "Updt" Sheet i.e. Cells B2, B3, B4, B5, B6, B7 and B8.

View 6 Replies View Related

Userform Textbox Formatting

Feb 28, 2009

Could anyone offer advice on how I would go about accomplishing this task? I'm trying to format two textbox fields on my userform that when the user inputs data into it, it would automatically show the "symbols, dashes and/or spaces accordingling".

The first textbox field (TextBox9) I need to end up looking like this, with the numbers and/or letters changing by user input.
example: (MI) A000-000-000-000

The next textbox Field (TextBox10) I need to end up with this type of result:
example: (MI ID) A000-000-000-0

I was trying something like this but I'm not familiar enough with the formatting symbols to accomplish this task.

View 14 Replies View Related

Userform Textbox Formatting ..

Jan 31, 2010

I'm a bit stuck with one of my userforms. I have a username textbox on my workbook logon screen. I have put a max length on the textbox to 7 characters. I have also added a bit of code which stops the user from entering anything less than 7 characters (once the commandbutton is clicked, a msgbox comes up), and the textbox will show text in upper case.

What I would like is a way to "format" the textbox. All of the usernames will be in the following format: BBAAA11. The first 2 characters will always be "BB". The 3rd, 4th and 5th characters will be any combination of letters (for example... "CAM", "EAL", "BEF"). Finally the last 2 characters will always be any combination of 2 digits (for example... "76" "24", "00").

If someone could provide me with some code which will not allow the textbox to type anything other than the specified format, or for a msgbox to appear once the commandbutton has been clicked to say that the incorrect format has been entered, I will be most grateful.

View 7 Replies View Related

Retain Formatting In Textbox?

Mar 1, 2013

I have a textbox that displays text from another cell in the workbook. The other text has some sections in bold, but when it displays in the textbox it doesn't show the bold text - The code I'm using at the moment is below.

Private Sub UserForm_Initialize()
Dim R As Long
ComboBox2.List = Array("QuestionSet1", "QuestionSet2")


View 3 Replies View Related

Macro Code To Change Positive Numbers Into Negative Numbers

Feb 1, 2007

I know ASAP has a feature to do this but I need the code in a bigger macro that I wrote.

EX: -1 needs to be 1

View 9 Replies View Related

Live Conditional Formatting - Update Figure And Colour

Apr 27, 2012

I am tracking figures over four weeks with a target of 4 sales per week. I have formatted the cells to light up - Green for 4 sales or more, Amber for 3, Red for 2 or less. I have set a monthly column up at the end of the table and want it to update the figure and colour that each member of my team is currently on. I can get it to change colour for the full 4 weeks worth of figure but want the montly column to be live and not cumulative. For example after 2 weeks if the total sales a member had achieved was 9, I would want the cell to be green. If after 3 weeks they had still only achieved 9 I would want the cell to change to amber once the 3rd weeks '0' figure had been added.

View 1 Replies View Related

Pivot Table Conditional Formatting Lost On Update

Jul 30, 2007

I am running office 2007. I am using conditional formatting in a pivot table to highlight rows where the value in the last column meets a particular criterion. However everytime I update the table the formatting gets lost. I have looked through all the threads I can find to establish if there is some VBA code that I can use to reapply the required conditional formatting after each update

View 2 Replies View Related

VBA For Date Change With Screen Update

Jun 18, 2014

In I2 cell, I have date in below format.

[Code] .....

I want Excel to automatically update the date in Column N2 with MM/DD/YYYY format.

This would go on until last row in I column.

View 1 Replies View Related

Worksheet Change Update On Any Event

May 7, 2013

I have the below vba and would like to have the '''event calculated ''' on any event on the worksheet. Right now it only update if updating the val1 thru val6 cells. How can i get the worksheet to update on any event or change on the sheet?

Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
fr = Range("a65536").End(xlUp).Row
Set Rng = Range("a2" & ":n" & fr)
If Intersect(Target, Rng) Is Nothing Then Exit Sub

[Code] .......

View 2 Replies View Related

Calculation Of The Cells Update But Very Many Of Them Do Not Change At All

Jul 20, 2006

I've created a bit of a monster Excel model taking in an enormous range of inputs and outputs. Most of the formulas are vlookups and sumif's. The workbook is now about 15meg. I've got autocalculate turned off because of the great deal of time it takes to recalculate. When I do try and re-calc some of the cells update but very many of them do not change at all. If I then go into these cells and edit them (F2 enter) the correct output is given! If I close the book and re-open it normally shows the correct outputs, after a while it goes back to the error above.

View 3 Replies View Related

Change Row Based On Cell Update

Jan 12, 2007

I`m trying to work out the best way to propogate a cell's format accross an entire range. What I ultimately want is for a user to only have to change the text colour of one cell, and for the entire row to immediately change to the same colour with it. Even if this means always having to update for example the cell in column A to change the text colour accross that row.

View 2 Replies View Related

Copyrights 2005-15, All rights reserved