Formula Return Zero In The Cell But "#DIV/0!" Appears
Jun 5, 2009
I am trying to figure out a formula that will return a zero in the cell whenever the "#DIV/0!" appears.
I have a worksheet that has a simple division formula in a column to divide the revenue by the total units sold to get an average rate (B2/B1). If nothing was sold however, the formula returns the "#DIV/0!" which throws off my totals at the bottom of my table. So I would like to figure out a formula that will convert the "#DIV/0!" to a 0, but if it doesn't return a "#DIV/0!" then I want the correct value to appear in the cell.
I've tried = IF(B2/B1= "#DIV/0!", 0, B2/B1), but it doesn't seem to work right.
View 9 Replies
ADVERTISEMENT
Aug 10, 2006
I need a formula that links to another workbook where it looks in a column for the oldest date which appears more than 10 times.
So if the oldest date was 01/01/2006 but it only appeared twice, it would ignore it, but if there was then 02/02/06 which appeared 11 times, it qould quote that date in a cell in the workbook
View 9 Replies
View Related
Apr 27, 2014
I'm making a Excel 2013 spreadsheet that has formula in a column that auto enters a number 1-40 when something is entered to the left of that cell. There are 300 rows in the spreadsheet. I would like to make a drop down list in a column cell to the right that would delete that number in that cell from the drop down list. For example cell C1 has 39, that 39 then is deleted from the drop down list. C2 has 22 in it, click on the drop down list cell and it shows 1-40 less 39 and 22.
View 11 Replies
View Related
Feb 17, 2010
Is there a way with the following formula to tell it that if value return is = to value of cell above then find return next value?
View 6 Replies
View Related
Oct 1, 2011
Version: Excel 2007 WinXP
I'm basically looking for something almost like an inverse function to INDIRECT. This function would first look at a cell's formula as a text string, parse out the first valid cell reference in A1 format, and return that cell as a text string.
Detail: I have a spreadsheet with cells that point to other values. I would like to get only the row number from the first cell reference in the formula residing in a given cell. For example:
Suppose A1 has the formula =AL267. and A2 has the formula =SUM(AL94:AL235)
I would like a formula in B1 that returns the text string, "AL267" so that I would know this is the first reference.
Ideally it could be dragged down to B2 such that it returns the text string "AL94" (and not "AL235") because AL94 is the first cell reference in A2's
Currently I am copying the formulas after hitting ctl+` and pasting that text into a text editor, followed by text operations to manipulate the results into the desired values. Any solution that didn't involve going out to notepad.
View 2 Replies
View Related
Dec 19, 2013
The attached spreadsheet is a sample of a master sheet I need to maintain. Keep in mind that the spreadsheet has hundreds of names on it and 10 sheets in the workbook. What name appears most in the "person who called" column, then I need to know out of all the people who called, what percentage of calls he made....
I have to do this on each sheet, so if it is possible to have it work for all the sheets.
View 6 Replies
View Related
Jun 30, 2014
I have a long list of terms, and I need to identify which of these terms appear in another body of text strings. Rather than searching for each individual term, is there a formula that check the terms for me automatically.
The terms will appear in the larger body of text, but they won't appear on their own, so they won't be perfect matches.
I've attached a sheet to try to illustrate the problem.
Term Checker.xls
View 5 Replies
View Related
Sep 21, 2007
What formula will count the number of times the value J3 appears in E2:E400. BTW...the a-g is formatted as a table. excel 07
View 3 Replies
View Related
Jan 16, 2006
I am using this formula to count the number of times “closed” appears between
particular dates:
=SUMPRODUCT(--($B$1:$B$23=F1)*($C$1:$C$23="Closed")*($A$1:$A$23>=$I$2)*($A$1:$A$23<=$J$2))
I have tried applying the same logic to another formula where I wanted to
Also count the number of times “Not Stated” and “In Progress” are shown.
However when I do I am receiving a ‘0’ number in return. The formula I wrote
was:
=SUMPRODUCT(--(CS_Ticket_Report_Dump!D$1:D$50000=C6)*
(CS_Ticket_Report_Dump!G$1:G$50000="Closed")*
(CS_Ticket_Report_Dump!G$1:G$50000="In Progress")*
(CS_Ticket_Report_Dump!G$1:G$50000="Not Started")*
(CS_Ticket_Report_Dump!A$1:A$50000>=AN$1)*
(CS_Ticket_Report_Dump!A$1:A$50000<=AO$1))
View 9 Replies
View Related
Apr 29, 2013
Frequency
Formula to show the final/total a numeric values appears in an adjacent column.
I am currently attempting (I've researched many posts on this), to count /show the final totals a duplicate numeric value appears in one column, in an adjacent column (example below).
I am currently using an array Frequency formula below (courtesy of the board) filled down in column Q. this works well to count the frequency of duplicate numeric values appear on the list.
Formula used in Column Q below
{=IF(C2>=0.1,MAX(FREQUENCY(IF(C2:$C$1000=C2,ROW(C4:$C$1000)),IF(C2:$C$1000C4,ROW(C2:$C$1000),""))))}
However my aim is also to show the final entry of a numeric value in adjacent column R, by displaying text to indicate this. My example below shows “final” in column R
NB: My list is sorted by column C to ensure all numeric values are in ascending order.
Example
Column C Column QColumn R
12567 1 final
15789 1
15789 2
15789 3 final
23456 1
23456 2 final
12678 1 final
18965 1
18965 2 final
View 5 Replies
View Related
Mar 21, 2009
I currently use the following formula to find the last used cell in a row:
=LOOKUP(2,1/($6:$6<>""),$6:$6)
which works fine but I have been trying to amend it so that it returns the last but one cell in a row. Have tried using it with Offset but without success.
Have found other solutions to finding to the last cell in a row albeit that a number of them do not seem to work with my project and likewise none of them seemed to allow customisation of any sort.
View 8 Replies
View Related
Dec 17, 2008
I need to return 100% in a cell for cells B2/A2. If B2 = 0, and A2= 0, I want the result to be 100% as a goal attainment returning 100% in C2.
How do I do this? I get a DIV error as usual.
View 9 Replies
View Related
Apr 29, 2006
Here is the formula I used to return the value of the cell.
=+((L2-O2)/250)-0.5
It return negative numbers so I used the If statement below to return 0 for any negative number and then I want it to return the value of the cell if the number is not negative. How do I finish the balance of the if statement to make that happen?
=IF(P2<1,"0",)
View 4 Replies
View Related
Mar 7, 2011
I have to loop through a range in A, and if the letter "C" or the number "9" appears in the cell anywhere (it won't be a whole cell value) then I need column B to show "C".
I know how to do a whole value loop, but I'm stumped on a 'find X anywhere' search.
View 8 Replies
View Related
May 2, 2014
The problem I am trying to solve is to have a cell return a cell value based on another linked cell. The cells I want to link are in separate tabs or could be another workbook.
For example if cell A5 in sheet2 is linked to A20 in sheet1...A5 has formula(=Sheet1!A20). I want the next cell B5 to look at A5 and return the value of cell Sheet1!D18.
So in essence I want the second cell to look at the first cell and return a value that is 3 columns over and 2 rows up.
View 4 Replies
View Related
Feb 5, 2014
I would like to use a formula that will pull values into a sum where the values are in a column and the category is in another column. The criteria in the text cells could be located anywhere in the cell.
Example:
Column A Column B
xyzyszt (Baseline) 7890
wrxyz4sdtr (Strategic) 1234567
zecgjioae (Baseline) Infrastructure 71235
qpielcmjj ae (Strategic) New Capability 278332
View 2 Replies
View Related
Mar 5, 2014
The formula I'm trying to use is
=IFERROR(INDEX(L31:L6621,MODE(MATCH(L31:L6621,L31:L6621,0)+{0,0})),"")
And it works as I need it to returning the value that appears the most from L31 to L6621. My problem is the number of rows will continue to change. So I tried something like this
Sub ARBM()
Dim lr
With ActiveSheet
[Code].....
But I get a compile error with expected end of statement. How else can I write this?
View 4 Replies
View Related
Aug 14, 2009
I have a long spreadsheet and want to remove rows of information from it if cells contain a specific word. If the cell in column A contains the word "district" or "borough" anywhere in the string of text and irrespective of the case I need to delete the whole row.
View 4 Replies
View Related
Jun 5, 2014
I want to develop on the formula I have below to return the value in the same sheet as the formula from Cell AA2 if the result of the formula below returns #N/A
=IF(ISERROR(VLOOKUP(B2,Analyst!$J:$K,2,FALSE)), VLOOKUP(AP2,Analyst!$B:$C,2,0),VLOOKUP('IE STORES AGING 06-05-2014'!B2,Analyst!J:K,2,FALSE))
View 2 Replies
View Related
Sep 7, 2009
the last date input into a range covering multiple columns and return the date in the cell containing the formula):
{=index(a9:n9,1,max(if(cell("format",a9:n9)="D4",column(a9:n9)))-column(a9)+1)}
My column headings use this pattern:
Column A: Date
Column B: Amount
Column C: Date
Column D: Amount
Column E: Date
Column F: Amount
and so on.
When I use the above formula, I end up with data from the last amount column instead of the last date column.
View 9 Replies
View Related
Sep 21, 2009
I currently have a list of totals that i want to easily be able to change the cells that make up this total.
I have been trying to set up one cell that contains the formula and then the remaining totals below are linked to this cell. Thus I change the formula in the top cell all the other totals also change.
View 9 Replies
View Related
Jan 15, 2010
Heres my current formula but its justreturning text i would like it to return the cells value
=IF((J2>K2);"value=J2";"(value=k2)")
View 2 Replies
View Related
Feb 23, 2012
In column A in sheet 1 I have a list of ID (starting in cell A2), the Id's are repeated and a new Id first appears in cell A30, repaeting the pattern the next new Id is in cell A58. This goes on in the pattern to around cell 44,000. All I want to do is write a formula in another sheet that enables me to have the cell value of A2 on the new sheet and in the next row of the new sheet to have the value of A30 and so on, until I have all the id's individually displayed on the new sheet.
After that I have data from the rest of the row (A2,B2,C2 etc) of sheet 1 in the following cells of the new sheet. After that I'm transposing data from column H of sheet 1 so it appears in the row of the new sheet against the ID's.
Sheet 1
Column headers> (A)Patient name, (B)number, (C)gender, (D)DOB, (E)Sample ID, (F)Hospital, (G)blood test parameter,
(H)Result Row 2 columns A to F repeate to Row 29 then next patient details list. These I want as Row 2 columns A to F in new sheet then the results transpose from column H sheet 1 to new sheet row 2 columns H to AI. (the results I have working with transpose)
View 2 Replies
View Related
May 8, 2012
I have a column of imported data like this, with scattered blank cells:
Rd Frnt200634350464300399636350
I am doing a multiple regression where the above are independent variables. I usually have hundreds of variables in a column like this. Because each cell must have a value in it (the regression won't accept blanks), rather than manually fill the blank cells with a 0, I set up an adjacent column to convert the blanks to a 0 and regress off that column. But every formula I try still produces a blank in that adjacent column. I have tried things like: =IF(A1="",0,A1) but they do not work. I always get a blank in the adjacent column when the original cell is blank. Can't get a 0 in there.
View 7 Replies
View Related
Jan 13, 2007
Is there a formula that will return in A1 the selected cell name in range B1:B10
example : If I click in B2 I will read in A1 the word "B2"
Easy to do with a message box but a formula?
I do not want the user to have to accept macros when he or she opens the file
Edit: If easier I could type in the cells their name and have the formula in A1 return the selected cell's "VALUE"
example In B1 I would type B1 etc...
View 9 Replies
View Related
Mar 4, 2010
i have IF sentence that returns either a number or a blank cell (tried using "") in a colum. This data is entered in a chart.
My problem is that that excel dont recognise the "" as a blank cell in my chart.
Is there a way to do this? i could maybe use VBA to make my own function that clear.contents if the cell value is smaler than say 1?
View 9 Replies
View Related
May 23, 2006
i need to essentially find and replace udf's and the complication is rearranging the parameters in the udf's into a new formula structure.
so my question, is there an easy way to extract a parameter (or all parameters) from a function?
for example, if you had = SUM(A1,A2,A3:A6) you would return 'A1' as the first parameter, 'A2' as the second and 'A3:A6' as the third.
Obviously it gets complicated when you nest functions such as =SUM(IF(A2=1,0,A1),A3) etc and the if() function would be parameter 1.
View 4 Replies
View Related
Nov 12, 2007
Is there a way to get Excel to look down a column for a particular value and where that value appears hide the row it appears in?
We have a series of reports which all have the same template, however we don't want some customers to be able to see some of the products as these are own-label products for which aren't offered to everyone.
I'd like to add this as a macro to a combo-box so that the user can view a report for their customer and then send a copy to the customer with the knowledge they won't see anything we don't want them to...
View 9 Replies
View Related
Mar 2, 2014
File I have attached or made a link for here Untitled-2.jpg
I am trying to make that amazon cell, all text to appear as one line like the second line foreign conversion fee i want it to appear like that. Rather then having to delete and modify 100's of rows like this.
View 6 Replies
View Related
Dec 3, 2006
Cells in Columns A & B (57 rows deep) have a real time data feed and can have values of blank, "H", or "R". The H and R can remain in the cell for any length of time. I would like to have an audible ding go off whenever a new H or R appears in columns A or B. Is there a cell formula that can do this? I think a macro solution would not work, because the workbook has a macro that activates every 10 seconds, so I assume a macro solution would interfere if both macros happen to activate at the same time.
View 9 Replies
View Related
