I have a formula that checks to see if a certain value is in between two numbers:
=IF(W44>35,IF(W44<37.5,"Empty"))
Is there another way to (more simple) to write this formula.
I'm trying to develop a formula that will take info from one tab (which would be the banks Cleared and Outstanding Checks report, and match with the checks that I have issued from the other tab. Basically this is for reconciling a bank account with the books. I want to add a column in tab #2 that shows if a check is cleared or Outstanding. So if I'm explaining this poorly, I apologize. Reply back if you have any specifics.
View 4 Replies View RelatedI am trying to find a formula for a vlookup that will check one cell for any value but if that cell has no entry then it will check a different cell to return the value how do i do this?
TEAMCSS Wetherill ParkCT NAME
above is where i need it to look CSS wetherill Park is cell C1 the cell that has no entry is H1, both of these cells have validation lists in them,
OS windows XP excel 2007
I'm working on a spreadsheet to compile and print checks. All the check information except the date and first check number is contained in a Wins sheet. I also have a Checks sheet which contains a master check. I used text boxes on the master check to contain individual check information. Each text box is filled in from the Wins sheet by means of formulas. The problem I'm having is how to modify the formula entries in the following code to cycle or loop through all checks required. A sample spreadsheet is attached.
View 2 Replies View RelatedI'm looking to put a formula in the last column (Card Valid/Invalid (N3:N8)).
I want this formula to say IF Project Name OR Start date OR Due Date or Type OR Author OR VS are empty then I want the last column to say Invalid else if all of these columns are filled in then give valid. Also if a completed date or no. of review loops are filled in but not both then give Invalid but if both are filled in then as well as all the rest of the info give Valid.
Project Name - Valid/Invalid is B2-N2
I'm trying to write an if statement that checks if a value is a whole integer value or not. I was initially using the Mod operator but realized that the Mod operator rounds values to whole numbers before determining the outcome. Initially I tried:
View 3 Replies View RelatedI have a excel sheet which has 2 columns
One has numeric values and other has description.
Each numeric value should match the description..
For eg:-
NoName23Vendor 145Vendor 278Vendor 380Vendor 5
The no should match the name
like this there are around 6000 matches
is there any possible way to include these many validations in one cell and display the result as "Good" or "Bad"
Type class VNOValidation111 Y233 NIf(class=any of the below nos then Vno should be Y if not then N. The result should be in "validation" cell). Class11334466778899100
Im not sure how i can use If function here....
I need to write a conditional statement that checks for the value of a cell and assigns a percentage based on the value in the cell. Nothing I have tried works....
Here are the results I need:
If value is 1-3, then 50%, else
If value = 4, then 45%, else
if value = 5, then 40%, else
if value = 6, then 35%, else
if value = 7, then 30%, else
if value =8, then 25%, else
if value =9, then 20%, else
if value =10, then $500
I have 7 columns (May 1st to May 7th) and 10 rows.
Each column needs to contain the following entries T1, T2, T2, T2, C2, C2, C2, C2, C2. These data will be entered manually in no specific order.
I want to create a macro that checks if the entries are present. If one or more is not present I would like to have the missing entries be placed in the cells A10 to A20.
embedding the following
(VLOOKUP(A2,[svdlsa08_2007mast.xls]Sheet1!$A$2:$U$3869,1,FALSE)
in the following statement:
=IF(((VLOOKUP(A2,[svdlsa08_2007mast.xls]Sheet1!$A$2:$U$3869,1,FALSE))-A2=0),(VLOOKUP(C2,[svdlsa08_2007mast.xls]Sheet1!$C$2:$U$3869,17,FALSE)),"No Match")
The IF statement is designed to check a different value in the source spreadsheet against one in the destination sheet which should always match for the desired values, but this doesn't seem to make any difference to what is being returned - I'm still getting the first match instead of the appropriate one.
Is there a better way to force the VLOOKUP to return the value from the correct match and not just the first one?
I am looking for a conditional format for the following scenario. If A2 has a value less than 1.5 and A3 has a value less than 2 then A1 will show green or whatever. Both of these values have to be met seperatly or A1 will remain unchanged. I just dont know how to put the AND in the formula to include both cell values needing to be met. Newbie to formulas.
View 4 Replies View RelatedI have an IF Function that I want to use to check mathematical errors between two sheets. For example Sheet2 is where I put all my material prices and Sheet1 cell A1 shows the total amount that is one Sheet2. On Sheet1, I have an IF Function in B1 that does the same calculation A1 does, but will display "ERROR" if A1 does not Match B1.
The IF Function works, my problem is that I want this to work from B1:B100 on Sheet1. But on Sheet2 the next SUM would be from row 42 to row 59.
How can I make and IF Function from B1:B100 on Sheet1 offset every 20 rows on Sheet2
For example:
Sheet1 B1 would be:
Formula:
[Code].....
Sheet1 B2 would be:
Formula:
[Code] ......
I need to do this without having to manually enter each range to sum up.
So I've applied conditional formatting to columns A and B to highlight and bold any blank entries. However since those guys tend to show up a thousand rows or so down I don't have anything to alert me that there is a problem. I know that I can just filter those columns to check but I'm not the only one using this sheet so I'd really like to have a visual cue.
Is there a way to have cell J1 highlight if any of the cells in the range (A2:H3000) have been bolded?
I thought that I had this working completely, but the test to see if the "file is already open" isn't working.
Something is wrong with my example.
I have marked in the code where the problem is. Everything else works. It's marked as such: ...
Need a quick macro for the following in sheet 1
Convert data to proper for columns- E, Z and ADConvert data to upper for columns- A, I, X and ACHighlight Special characters with cell colour as Red for (!@#$%^&*:”<>+_’;\/?`~-)Find & replace % in the current sheet with blank.ran.
I want to create a script that loops through each row where it checks if an input range is over 0.
So it starts by me declaring what cells in row ex A5:A7
Then it loops through each row in searching only in column 5:7 if its over 0.
If it is, then mark those cells red..
Is this possible?
I have an excel worksheet that creates the total arival/departure time for workers. In the "ore lucrate" column i need a formula that checks wheater or not in column b exists text, if it does then check if cell r12 is bigger than one hour and the substract exactly one hour from it, i.e. 03:45 needs to be 02:45. However if it's not bigger than an hour then put the result as it it (r12). And finally if the adiacent cell in "ore lucrate" doesnt contain text then it should be left as the folowing 00:00.
View 4 Replies View RelatedI am trying to set up a double click macro that checks the color index of the exact same cell you double click on, but in another sheet. What would be the syntax for that?
View 2 Replies View RelatedI have a spreadsheet that uses a Form for Data entry. Each record has ID, Name, State, and about 20 more columns of information for each ID.
The data entry is working well.
What I need now is to add a check for a UNIQUE ID. If they are adding a new record I need my form to return a message if the ID they use is already in the database. So if they enter XXXXX and that is in the file already - they should get a message that XXXXX is already in the database and to please enter a new ID.
And once they fix XXXXX to XXXXY then the record is added.
I should add that the ID is stored in column A.
I'm using excel 2000
I have a formula that checks a cell containing an email address, and if the format is not the office standard, displays a message. We now allow 2 variations, and I want to check for the second condition as well.
Basically, the email address is in the format
"Firstname"."Lastname@here.com
and the formula just checks the address against a lookup of names, the only seperator being period.
I now also need to be able to check for an underscore, and I don't know how to combine the conditions.
The existing forumula is
=IF((LEFT(A2,FIND(".",A2)-1))(LEFT(E3,FIND(" ",E3)-1)),"Check Email Recipient Main Database page column BQ:BR","")
and of course the underscore is easy, too
=IF((LEFT(A3,FIND("_",A3)-1))(LEFT(E3,FIND(" ",E3)-1)),"Check Email Recipient Main Database page column BQ:BR","")
but when I try to combine them, I get an error, or at best a VALUE output.
I think I need to nest them, but maybe there is a way to combine the conditions in or use "OR" and still get the "check email" message" ??
I'm trying to run a piece of code which checks the length of a cell entry and if it is over 100 characters long it deletes the value. The code is as follows:
Sub Macro1()
If Len(Cells(1, 1)) > 100 Then
Cells(2, 1).ClearContents
End If
End Sub
The string which is causing the error seems to be 255 or more characters long. Any ideas how to tackle the "Overflow" Error?
I would like to add a visual indicator to my sheet that checks if a specific file exists in the same directory as the active workbook.
The filename format would look like: "something.invoice.(mm-dd-yyyy).xlsm"
The macro would check the =today date, calculate the previous month, and check to see if a file named that exists.
I am trying to create a way to easily maintain a list of outstanding checks. I am able to import cleared checks into the spread sheet but cannot find a way to compare the two lists and then delete the cleared checks off the original list.
View 2 Replies View RelatedI want to create a column where the user can input ANY data (number, symbol, letter, etc.) and create a sum. Basically, I want to be able to add "checkmarks" where the checks have a predetermined value based on the column the check is placed.
View 5 Replies View RelatedI have two cells. The first cell has the formula:
=CONCATENATE("D",TEXT(MATCH($B$6,'Zip Ranges'!$D$1:$D$157,0)+1,"0"))
which results in a col and row number (such as D65).
The second cell has the following formula:
=INDEX('Zip Ranges'!$A:$B,MATCH($B$6,'Zip Ranges'!D1:$D$157,0),2)
^^
I wish to replace the 'D1" in the Match function with the results of the first cell's formula.
I assume Indirect would work, but I don't know how to code the formula to use it.
I copied and pasted a text file into excel. Now I am trying to sum the numbers, but the formula always equals zero. How can I fix this so that excel recognizes the numbers.
I tried copying 1 and pasting special values - multiply. This has always worked for me in the past, but its not working now.
Ex. cell A1 equals 100, A2 = 50 sum(A1:A2) = 0
writing a formula to sum the six largest numbers from a row of numbers. I have used the array formula "=SUM(LARGE(E2:M2,{1,2,3,4,5,6}))" and it works for rows that have six or more numbers; however, not all of my rows always have six or more numbers. Rows that have less than six result in "#NUM!".
View 5 Replies View RelatedI'm trying to wrap up a spreadsheet and I'm trying to figure out how to have my formula use the highest of 2 numbers when making a calculation.
For example:
If:
Cell A1 = 5000
Cell B1 = 3828
I want the formula to use A1 in this case. However, if the total of B1 = 6000, I want the formula to use B1 instead of A1 in the calculation. (A1 = 5000 will always be a constant/base).
I am a school teacher trying to adjust my tracking sheet to calculate pupils levels. I am looking for 2 potential formulas that will do the following.
1 - In cell AE I would like to generate a formula that will take the data entered in cells J:5, L:5, N:5, P:5, R:5, T:5, V:5, X:5, Z:5, AB:5 and AD:5 and give an average level.
2 - In cell AH is it possible to generate a formula that will calculate how many levels of progress the pupils are making - In other words I need Cell I to be calculated against cell J to see how much progress the pupils are making - for example if in cell I:5, a pupil is was given a 3a, and then in cell J:5 is given a 4b, they will have made 2 sub levels of progress. As well as this, can that progress then be averaged out across cells I:5, K:5, L:5, M:5, O:5, Q:5, S:5, U:5, W:5, Y:5, AA:5 and AC:5 to give an overall number of of levels of progress? An then..... can I colour co-ordinate the cell so that if the pupils are making 3 or more sub levels of progress it turns green, 2 sub levels orange and 1 sub level red?
Levels work like this
3c
3b
3a
4c
4b
4a
5c
5b
5a and so on