Conditional Formatting That Checks Every Cell In Range?

Dec 6, 2013

So I've applied conditional formatting to columns A and B to highlight and bold any blank entries. However since those guys tend to show up a thousand rows or so down I don't have anything to alert me that there is a problem. I know that I can just filter those columns to check but I'm not the only one using this sheet so I'd really like to have a visual cue.

Is there a way to have cell J1 highlight if any of the cells in the range (A2:H3000) have been bolded?

I am looking for a conditional format for the following scenario. If A2 has a value less than 1.5 and A3 has a value less than 2 then A1 will show green or whatever. Both of these values have to be met seperatly or A1 will remain unchanged. I just dont know how to put the AND in the formula to include both cell values needing to be met. Newbie to formulas.

I need to write a conditional statement that checks for the value of a cell and assigns a percentage based on the value in the cell. Nothing I have tried works....

Here are the results I need:

If value is 1-3, then 50%, else If value = 4, then 45%, else if value = 5, then 40%, else if value = 6, then 35%, else if value = 7, then 30%, else if value =8, then 25%, else if value =9, then 20%, else if value =10, then $500

I have a range of data on sheet1 say A1:A10 with random letters in each cell. On sheet2, I also have random letters and number in column A. What am trying to do is find a formula which if any of the data on sheet1 can be found in say A1 of sheet2 then shade the cell a given colour or if formula in B2 then show True otherwise false if not found. then do the same for the remainder of the cells on sheet2 which am assuming will be to just copy the formula in B1 of sheet2 or the conditional format in A1 whichever comes first.

I have a series of columns (L - X) each representing a diagnosed disorder (Dx), coded as binary, with 1=Positive Diagnosis (Success). The reference cell contains diagnostic codes; for each respective Dx column I need a 1 or 0, obviously. Each Dx category has a range of values (Dx codes), so I need to write syntax that reflects this range. For example, =IF(A1=>141,AND(A1=<239.99)),"1","0")

In other words, if cell value is 141 through 239.99 then return 1, else 0

Would it be something like this: =IF(AND(A1=>141,OR(A1=<239.99)),"1","0")

I am working with the Conditional Formatting, which is fine for one cell. Here is what I am trying to do: IF cell in $A1 = 1 then bold $B2:$M2 and apply solid line border to top of cell ranges. I have tried conditional formatting but it only formats the cells in column A. And I can't seem to find a BOLD statement for the cell formulas.

I want to set a conditional format to cell A1 with a value in cell P1 When the value in P1 is between 0 and 10 the conditional value in P1 should be set.

Note

cell A1 is also set with a conditional format to put a border around it when there's a value in A1 (cellvalue is not equal to " ") So the formula referencing P1 would be a second condition.

This is a conditional formatting problem I have not been able to resolve:

I have a range, say A1:N30

Each cell contains a text/number combination.

I would like to highlight each cell on a specific row if the vale exists within the row above - the issue is that the cell values are not in the same columns.

I have attached a sample workbook with the desired output.

how to apply conditional formatting via VBA to a range of cells based on input from another range of cells. Obviously this would be easy in Excel 2010, but I'm still using 2003 at the office and it needs to stay in this format to be readable by other users:

For cells M8:EK8, my conditional formatting condition 2: Formula Is =AND($E$8>=M2,(($E$8-$D$8)>=(N2-$M$2))), color index is 40 condition 3: Formula Is =AND($F$8<=M2,$G$8>=M2), color index is 39 I want to add: condition 4: Formula Is =AND($H$8<=M2,$I$8>=M2), color index is 40 condition 5: Formula Is =AND($J$8<=M2,$K$8>=M2), color index is 39 and so on

The cells in the range M8:EK8 are blank, they only get colored based on input added to D8 to K8. If there is no input, then the cells should be uncolored.

Summary of performance of various products against target is as follows,

Product vs Target Color Code Result

CH4OH Green 1.0

[Code] ........

I need the final result automated as follows,

If 2 green of the 4 products, then final result Gree If 2 Amber of the 4 products, then final result amber If 2 Red of the 4 products, final result Red

Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:

If AI3=C3 & C3 is red, format AI3 blue If AI3=D3 & D3 is red, format AI3 blue Otherwise, leave AI3 unformatted.

I have a list of names that belong to a particular group. What I want is to conditional format a sheet so that if a name is entered that does not belong to the group it is highlighted red. Don't really know how to do this though?

I have a spreadsheet that has a table listing employee names in the far left hand column (A1, B1, C1, etc.). The table has a simple border - black line throughout.

I need the entire row for the employee to change to no border if the employee's name is deleted.

I was looking to use the VBA conditional formatting script posted on OzGrid and was curious if it would be easy to make some slight modifications.

Private Sub Worksheet_Change(ByVal Target As Range) Dim icolor As Integer If Not Intersect(Target, Range("A1:A10")) Is Nothing Then Select Case Target Case 1 To 5 icolor = 6 Case 6 To 10 icolor = 12 Case 11 To 15 icolor = 7 Case 16 To 20 ..........................

I can see that Case is the number range referenced to change the background...However, would it be possible to have it read a cells value as the criteria for the color change? Currently, I would like it to reference values in range I2:M2 and anything matching those cells in range A4:E28 change background to icolor = 30. I'm just not sure what to replace Case with to make it refence cells I2:M2

I have a sheet called Quote Summary and a sheet called AssemblyBoms.

In the Bom sheet, I have a named range for QtyPer and a named range for unit price because these ranges are dynamic.

On the quote summary sheet, I want to format the cell (A9 and eventually A9 to A28 and so on), which contains a formula right now that only references a tag and does some equivalence checking

(=IF(AND(QSA>0,QSA=qty1a),assembly1,"")),

to have a yellow background if QtyPer>0 but unit price = "" or 0. I know the formulas for this, but it is not formatting anything. Attached workbook below.

QUOTETEMPLATEMACROTEST.xlsm

Conditional Formula for true: ="AND(qtyper1 > 0, unita1 = "")"

I typed it in without the = or "", but the formatting added those in for me.

I typed a number in the qtyper1 range and left the unita1 range blank to test it and no formatting has occurred.

I have a column of dates in column M, and in A1 I have the formula =TODAY() for today's date. I would like to conditionally format all of column M (up to row 198) so that it turns orange if the date in M is before today and after or equal to 3 working days before the date in M.

I have this =AND($A$1<M2,$A$1>=(WORKDAY(M2,-3))) But it doesn't appear to be working because it's highlighting dates after todays date.

Have a spreadsheet using the following conditional format to color highlight every other row: =MOD(ROW(),2)=1. Is there a way to apply this conditional format to all columns A through AR and all rows 1 through 24000 only?

I'd like my conditional formatting to format the range of cells red if the range K2:S2>H2. That is when the range K2:S2 are added together, and if their sum is greater than H2, format cells K2:S2 red.

I have a Conditional Formatting query where in essence I am needing to ‘make invisible’ a range of data by changing the font and background fill to white (and at the same time nullifying the effects of a number of other Conditional Formats). On the surface, this seems an easy thing to achieve, but the problem is, the range I need to apply this CF is a moving range and is dependant on a user changeable date.

Description of worksheet:

The sheet is managing shifts worked over 1 year by 21 people. The top 33 rows are a frozen (and collapsing) display area below which is a matrix of 365 days down and 21 people across. The TODAY button uses a macro to scan the dates and display todays entry directly beneath the freeze line of row 33. The date in M28 can be entered manually and after hitting enter, that dates data is now displayed under the freeze line. Also, using the spin button will increment or decrement the date in M28 moving the entire matrix up or down.

My query..........

What I’m hoping to achieve, is to display ONLY the data selected by the date in M28 (ie that shown under the freeze line, and for all remaining rows to be ‘whited out’, but as the user increments/decrements M28, then the “whiteout” range also needs to increment/decrement. I have whited out a second worksheet “example” as if I had selected 18 Jan (this sheet will not move as there are no buttons, but the data is still there under the whiteout).

I hope this is not TOO unclear, but I would be grateful if anyone could suggest a solution or even tell me if this is not possible – or indeed any other way of achieving the same result ( I had thought of hiding the rows below the freeze line, but the freeze/unfreeze operation would probably be too jerky.

What I am trying to do, is apply conditional formatting to a range of cells (for example, A2:J2) based on whether the data in one of the cells (D2) contains "Yes" or "No". I would like the entire range of cells to be one color if D2 contains "Yes", and another color if D2 contains "No". If needed, this can be split into 2 different conditional formatting rules.

I am wondering if there is a quicker way to set up conditional formatting for a range of cells. In my projects, I have a range of cells N7:U16, where each row (7-16) would need to have a cell formatted based on a value in the cell adjacent to the range. I.e. the cell in range for row N7:U7 needs to be formatted based on the value in V7, and so on down for for rows 7 thru 16. Said another way, if the cell in the row range between n7:u7 = v7, then the cell in the range is uniquely formatted.

But I want to apply this logic all at once, instead of having to conditional format each row individual. The trick is that the cell with the value that I am comparing to is variable (i.e. V7:V16), but does correspond with the row I am comparing it to.

I need a formula to use with conditional formatting that "lights up" the corresponding cells. So, in this case cells A7, A27, E3... should "light up". Is this possible, or should I use VB?

conditional formatting a range of cells where i need more than 3 conditions, so please see below and can anyone kindly construct some vba code for me to do this (And if you have time to explain how it works so i have a good understanding of this)

Range R6 to R299 contains delivery dates Range AO6 to AO299 is = to the corresponding cells in Range R but formatted to show the Day

Cell AL1 contains a date which changes on a Thursday to show the following week commencing date.

What i am after is code so that Range AO6 to AO299 changes cell colour to the following criteria

less than AL1 (White) Is between AL1 & AL1+7 (Blue) Is between AL1+7 & AL1+14 (Green) Is between AL1+14 & AL1+21 (Yellow) Is between AL1+21 & AL1+28 (Pink)