Formulas For Trailing Twelve Months (two Rounds)
Dec 30, 2013
I have two rounds of numbers and I want to divide the numbers across 12 steps for each round. I've shown the outcome of what I want in the attached spreadsheet, but I was wondering if there was a way to accomplish this with a formula rather than doing it manually.
Round 1.xlsx‎
View 4 Replies
ADVERTISEMENT
May 6, 2010
I am trying to add the total values from twelve months sales together, then when i add the next months sales value (month13) it is added to the twelve months total but the first months value is deducted from the total. So basically it is a rolling twelve months total figure that both adds the latest months value and deducts the first months value automatically. i am not sure if this is possible in excel 2007.
View 5 Replies
View Related
Oct 24, 2011
how can I provide a chart that display as a line chart twelve months of data for the item selected starting or ending on the data that I have selected
View 4 Replies
View Related
Jun 1, 2014
I have a sum formula that adds 3 different cells from 3 different columns to reach my total profit. The sum total will occasionally be rounded up one cent. I have check formatting and it is set to accounting with 2 decimal places. The formula is the same in each row as well as the format of each cell. Why would the formula occasionally round up?
View 6 Replies
View Related
Mar 12, 2014
I have a formula that I'm trying to utilize VLookup to determine a specific bonus. The issue I'm having is when looking for the closes match, it is returning the value below where it should because it's rounding down. For example, the string I have reads:
=VLOOKUP(S5,'Rep Daily'!A1:B61,2,TRUE)
The value it's defining is 17.7485, so it's returning the bonus for 17.5 instead of 17.75. Even when I use the =Roundup function, it's showing 17.75 in the cell but the actual value of the cell is 17.7485 so VLookup is returning the lower of the two values.
View 7 Replies
View Related
Dec 6, 2013
I have a date column (Column E: Date Entered) on my spreadsheet that I need to set conditional formatting on. There are two conditions:
1) 18 months from the date in the cell needs to be highlighted yellow
2) 24 months from the date in the cell needs to be highlighted red
View 6 Replies
View Related
May 26, 2009
I want to be able to rank players only if they meet or exceed a specific number of rounds. I have been able to get close but I would like to have the ranking start at "1" instead of "0" (see sheet).
View 4 Replies
View Related
Jul 19, 2009
Cell A1 is a past date. In cell B1 I would like how many months have gone by since todays date. eg. Cell A1 = July 07, B1 would = 24 months.
View 3 Replies
View Related
Jul 31, 2007
I am looking for a formula that will add months and return the year. E.g. if I add 1.05 and 1.07 I should get 3.01. i.e. 3 years and 1 month.
View 9 Replies
View Related
Oct 22, 2007
what formula could I use when I type in a date another cell rounds up to Jan 1st of the next year? ie 2/1/07 & in another cell it returns 1/1/08.
View 3 Replies
View Related
Jul 9, 2009
how to set the format of a cell such that it will automatically add trailing blanks to the data entered into that cell while fixing the number of characters that could be entered into that cell?
View 3 Replies
View Related
Jan 13, 2010
Now I have a decimal column and I would like to remove all of the trailing zeros. It is using the number format. How do I accomplish this?
View 10 Replies
View Related
Sep 18, 2013
I have a column of data in which each cell contains a line of text. Each line of text has spaces after the letters end and there doesn't seem to be a consistent number of trailing spaces.
I can clean up the data using the TRIM function but is it possible to use the TEXT TO COLUMNS functionality?
View 2 Replies
View Related
Nov 23, 2007
I would like to use the following code to produce a message with two numbers in it, both showing an exact golf handicap to one decimal point. If a number is exactly 6 I want it to show as 6.0.
All works well for the number I'm collecting from the user and storing in newh. But I can't retain/produce the trailing zero from oldh which is formatted in the spreadsheet as Custom 0.0.
View 10 Replies
View Related
Dec 29, 2009
I need a macro to do a comparison between two spreadsheets, and one part of it is throwing me, as I need to compare apples to oranges. Here's the situation:
Sheet A has the data noted like this:
PAC
11000
11100
11500, etc.
All data should have 5 digits, and my numbers range from 11000 to 87028, though quite a few are skipped.
Sheet B has data like this:
PAC
110
110-CBS
11000
11100-ING
112
11500-L
How can I change sheet B to:
1) Drop off the dash and anything following?
2) Add trailing zeroes to make sure all numbers are 5 characters in length?
View 3 Replies
View Related
Jul 30, 2008
What the quickest way to get rid of trailing spaces from a column of imported data ?
View 12 Replies
View Related
Oct 12, 2008
I have a set of data with trailing Y in certain cells.
Instead of the replace function in Excel, is there another way of removing the "Y" in that cell and storing it another cell while keeping the numbers before the Y.
i've created another column to determine which cells has Y as the right most character by using =IF(RIGHT(F2,1)="Y","Y","")
So for example, I want to remove the Y from say Cell A2 and store it in say cell A3 while still keeping the value 8624.46 in A2
Cell A2 = 8624.46Y
View 9 Replies
View Related
Sep 24, 2006
I have an excel file with two sheets . One containing the updated prices with its code ( Sheet1) and the other containing the old prices with the same codes (sheet2). Now after several trials to copy the new prices from sheet 1 to sheet 2 with check if the code is same . ( I couldn't )
So how to get rid of the 20 spaces from Sheet1 column A.
View 9 Replies
View Related
Oct 29, 2006
I have written a function which works in the same way as the concatenate formula but where required it uses an underscore to make up the length (14 Characters) of the result. I seem however to have hit a minor snag when users input trailing spaces. I thought I could use trim to eliminate them but it doesnt seem to be working
Function HypCon(CorpAcct, Subdiv)
Dim n, i, iLen, iLen2 As Integer
Dim sCorpAcct, sSubdiv As String
Dim iLen3, iLen4 As Integer
iLen = Len(Trim(CorpAcct))
iLen2 = 7
iLen3 = Len(Trim(Subdiv))
iLen4 = 5..............
View 9 Replies
View Related
Mar 15, 2008
Removing Trailing Commas
I have a list (general ledger) GL codes with trailing commas
Example:
123456789,123456722,123789456,,,,,
When I try to use “replace” and replace the multiple commas with nothing it turns my gl codes into a scientific number (1.23456789123456E+26), but my cell is formatted to text.
The other problem is for numbers with a single trailing comma, it would also remove the commas between the GL codes
Is there a function that removes trailing commas, or commas that are not followed by numbers?
View 9 Replies
View Related
Jan 9, 2014
I'm attempting to create a spreadsheet to calculate various things at my work, however I'm running into a problem that I can't solve. In one cell, I have a formula that returns an value to two significant figures. The number of decimal points that this value has is then used at various points throughout the sheet to truncate/round/etc. However, if the first value has a trailing zero as the second significant figure (ex. 0.20), that trailing zero is dropped. This creates problems since downstream calculations are then truncating to an incorrect number of decimal points. How to retain this trailing zero IF the formula results in one?
View 4 Replies
View Related
Feb 27, 2009
I am trying to create a CSV file to import all of our workers into a payroll software. Unfortunately the list of workers that I have been given to work with has a first and a last name together in one cell. I need to split them into separate cells so the data ends up in the right field in our software. By importing external data and separating the names with the comma as a delimiter, I have ended up with the first name in one cell and the second in another, which is exactly what I need. However, this process also ends up putting a quotation mark in front of the first names in the cells in column A, and a quotation mark after the second name in the cells in column B.
I remember to removing trailing spaces with a macro once, and I am hoping the same theory can be applied to make two macros - one to remove preceding quotation marks, and one to remove trailing quotation marks. The only trouble is, I know no VBA whatsoever, and don't even know how to make a macro unfortunately. Would someone mind letting me know if what I need is possible, and then - literally step by basic step - explain how to make a macro and provide the code to paste into it?
View 2 Replies
View Related
Jun 4, 2009
I have a spreadsheet with numbers of various lengths.
Sometimes they are preceded with a period and have one at the end as well.
Examples: of their present state
.11110000.111111.000000.
111111.1111111.000000.
100000.000000.0000.110001.
Examples: of desired state
10000.111111.000000
111111.1111111.000000
100000.000000.0000.110001
Is their a way I can create a new column and insert a formula, then drag it down so that it will delete the first or last character, if the character is a period?
View 6 Replies
View Related
Oct 21, 2008
I have a sheet that has consecutive dates in column A, from newest to oldest. I column B I have some stock returns. In column C I have some other stock returns. In D1, I want the covariance of the 2 stocks over the past x days (i.e. covar(B1:Bx,C1:Cx)). In D2, I want the covariance over x days as well, but only up to the date in A2 (so, covar(B2:B(x+1),C2:C(x+1))).
I tried this, but it doesnt work:
View 9 Replies
View Related
Dec 10, 2008
I cant seem to figure out how to concatenate data from two cells into one cell and retain trailing zeros. If Cell A1 has ".0000" and cell A2 has ".0005" then I want cell A3 to show:
".0000-.0005".
I get "0-.0005" on my attempts. Alos, how do I make the value an actual number and not a formula?
View 3 Replies
View Related
Dec 23, 2009
I have a problem that I just don’t seem to have the brain power to solve right now. I have a list of websites and I need to extract all characters after the last “/” in the URL. URL example:.....
I have been using the find function in conjunction with LEN and RIGHT etc but the multiple instances of “/” is causing headaches for me. Also, the trailing string of characters that I want to extract can be both text or numeric and are of differing lenths.
View 3 Replies
View Related
Jun 25, 2007
I have seen a few posts that are close to this but not quite right. I have a situation where I need to do "=LEN..." formula that counts trailing zeros at the end of numbers (meaning zeros that are displayed at the end of a number but do not appear in the actual cell value).
example:
Cell E19 contains the actual value 4773.52, but it is displayed in currency format with FOUR digits so it displays as $4,773.5200.
The formula I am using is =LEN(MID(E19,FIND(".",E19)+1,4)). The result is 2, which means it does not include the last two trailing zeros in the LEN count.
Is there anyway to get it to include the trailing zeros so the result equals 4? Either w/formula, macro, or UDF?
Is weird I know, but I need to know how many decimal places (displayed, not actual) for many numbers on many sheets that I do not create myself.
View 9 Replies
View Related
Mar 28, 2009
The below code removes trailing spaces, but for some reason it does not remove space from this, i clicked F2 and the space is still there, why does it work on some but not others?
98956P102
Sub test()
With ActiveSheet.UsedRange
.Value = Evaluate("if(" & .address & """"",trim(" & .address & "),"""")")
End With
End Sub
View 9 Replies
View Related
Jan 13, 2009
I need to never have a trailing zero be displayed but still have decimals displayed (we can use up to 3 digits for the example) Here's a list of test cases
Value______Display
1.234567___1.235
1.234______1.234
1.23_______1.23
1.230______1.23
1.2________1.2
1.200______1.2
1.0________1
1.000______1
1.020______1.02
1.0002_____1
0__________0
0.001______0.001
0.0001_____0
The only time I want to see a 0 is when the answer is 0 (or rounded to 0) or when 0 is required in the middle. This is for patient safety if you are curious. 2.0 when printed out or written by hand can be mistakenly read as "20" in the heat of things, thus 2.0 should be written/printed as "2" (no decimal on the end) not as "2." even, just "2"
View 6 Replies
View Related
Jan 5, 2007
I am doing a vlookup on fields such as 02-0223. In one table, there is a space at the end of 02-0223 and in the other table, there is no space. How can I delete the space so the numbers match in vlookup?
View 7 Replies
View Related