Fractional Numbers In A Textbox
Dec 18, 2008
My problem with fractional numbers in a textbox. But I still have issues. This time I'm uploading the workbook in question. click on the word "AutoVIB" which will bring up the user form. Then go to the Screens sheet and try the first slider that's not labeled. This is the slider that I've instituted the code that you so graciously supplied. It does display fractions but now has a very peculiar behavior. The other sliders that I've left coded as before work fine in that they function properly.
View 3 Replies
ADVERTISEMENT
May 29, 2007
When exporting a set of historical sports results to Excel 2003 the numeric odds are converted to a date eg 7/2 changes to 07-Feb. Can this be prevented or adjusted to retain the original data.
Also if I may ask can the UK style odds be converted to a decimal style. Eg. 7/2 (UK) needs to be converted to 4.5 ( Decimal equivalent )
View 9 Replies
View Related
Aug 6, 2013
I am trying to capture the number of years/quarters are between two dates - giving credit for one day worked into the quarter.
In the attached png file you can see the formula I used for column J. This is the same formula I need to use for Column R but now using 10/1/11 and the date provided in Column R. The formula should be used in Column S "Part B" so that I can determine the number of years between 10/1/11 and the date in Column S.
View 7 Replies
View Related
Mar 24, 2009
This is a continuance of the Q and A below. Except the answer below converted a decimal like 1.44 to and answer like 1' 5.28".
except the final format I am after requires the 5.28" to be fractional such as:
1' - 5 1/4"
Is there a formula for this format?
View 9 Replies
View Related
Apr 6, 2012
I have a TextBox on a multipage on a userform. When used, entries are trapped by
Private Sub tbxCrew_Change()
Call OnlyNumbers
The code then successfully shifts to the following
Private Sub OnlyNumbers()
If TypeName(Me.ActiveControl) = "TextBox" Then
At this point, it decides that TypeName(Me.ActiveControl) = "MultiPage", not "TextBox" and skips over to End Sub allowing me to enter both text and numbers in the TextBox.
View 4 Replies
View Related
Apr 24, 2007
I have a VBA user form that asks for user's input. The form has 3 textbox. I would like to check for the entry & make sure that it's numeric & not null. If it's not numeric or null, I'd like to display a warning message & highlight the textbox & ask for entry again.
Here's what I have but it's not really working. The warning message will come up but the next textbox is highlighted:
Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If Not IsNumeric(Me.TextBox1.Value) Then
MsgBox "Please Enter Only Numeric Values"
TextBox1.SetFocus
End If
End Sub
Private Sub TextBox2_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If Not IsNumeric(Me.TextBox2.Value) Then
MsgBox "Please Enter Only Numeric Values"
TextBox2.SetFocus
End If
View 4 Replies
View Related
Dec 17, 2007
I am trying to make validation so a textbox in a form can only accept only letters. At the moment however i can only seem to stop it entering numbers on its own, i cant stop it from accepting letters and numbers. here is the code so far. (please try keep the code simple as possible i have seen more diffuclt solutions but they are to difficult)
Private Sub LetterVal()
'Validation to ensure only Letters may be entered into the text box.
If IsNumeric(Textbox1) Then
Textbox1.BackColor = &HFF&
MsgBox ("Only letters aloud in field")
Else
Textbox1.BackColor = &H80000005
End If
End Sub
View 3 Replies
View Related
Jan 25, 2010
I have the following code in a user form, attached to a data field that the user should fill. This code should alert the user if he enters a negative number i.s.o. a positive (and vise versa). Due language related issues, it is quite possible that the user will enter (by mistake) a negative sign but it will be at the end (500-) and the user will not notice this mistake. For some reason, my code does not pick up on this, and does not pop up the error message. Therefore, I decided that I need to check if the value entered by the user also contains a - at the end of the string. This, I believe, will take care of the problem.
In excel, I would simply enter a formula with Mid and Len (to check if the last character is -) , but I dont know how to implement it in my code.
Sub txt_sum_BeforeUpdate(ByVal Cancel As MSForms.ReturnBoolean)
'Verify that a negative sign was added for expenses
With Me.txt_sum
Select Case cbo_act
Case "Expense",
If Me.txt_sum.Value > 0 Then
MsgBox "Number must be negative"
End If
Case "Income"
If Me.txt_sum.Value < 0 Then
MsgBox "Number must be positive"
End If
End Select
End With
End Sub
View 9 Replies
View Related
Oct 17, 2006
Is there a way to see if a textbox is blank.. what I mean is, there may be some spaces in the text box which make it seem that there is something in the Textbox but all they are, are blank spaces.. no numbers in otherwords..
On a userform I have a textbox7 to enter in only the last 4 digits of the persons shop phone #. I have it coded that if the textbox isn't empty, it will put the required extension "X-" in front of it to identify it as a phone extension. If the cell is empty, it will remove it so it doesn't put the X- in the database without a phone #.
Finally the problem, if there are spaces in textbox7, no numbers, it will think that something is in there and put X- .. this messes up the database.
How do I check the textbox to see if it has numbers in there.. This is my code now...
' If TextBox7 is empty Then Phone = Blank
If TextBox7.Value = "" Then
PhoneC = " "
Else
' Preps Phone number with X- for extension
Fourdigit = TextBox7
Plus = "X-"
PhoneC = Plus + Fourdigit
End If
View 5 Replies
View Related
Sep 4, 2007
how to make a code that will display a random number 1 by 1 and fast in a single textbox so it will make un illusion that it is searching numbers..
View 7 Replies
View Related
Apr 23, 2008
I have a textbox in an excel userform and want the display to be formatted. When "9.1" is entered "9.100" shows either before or after going to the next textbox on userform. The code below is not working.
Private Sub UserForm_Initialize()
txtWaste = Format(Me.txtWaste, "00.000")
End Sub
View 6 Replies
View Related
Jun 6, 2008
I have set up a form which requires one textbox to have a decimal followed by four numbers (ex .5780) and another which requires two numbers, a decimal, then two more numbers (ex 57.80). how this can be accomplished? I am new to Visual Basic coding!
View 6 Replies
View Related
Jun 29, 2012
A text box on a Userform inputs numbers to a cell in a worksheet. I want the number to appear in the text box formatted #,##0.00 However, if I include the line
Code:
csDepositTextBox.Value = Format(csDepositTextBox, "#,##0.00")
in either the csDepositTextBox_Change or _AfterUpdate events, it causes the number to be stored as text in the worksheet. Curiously I can put the code in the corresponding event for another textbox and it does not corrupt the formatting.
View 3 Replies
View Related
Aug 15, 2007
I have a user form to get some input from the user and want to make sure that in some textboxes user should be able enter only text i.e A to Z or a-z no numbers or special charecters.
Private Sub CommandButton1_Click()
Dim RegEx As Object
Dim Strng As String
Strng = CStr(Me.TextBox1.Value)
Set RegEx = CreateObject("vbscript.regexp")
With RegEx
.Pattern = "^[A-Z]{2}/d+/d{2}$"
If Not .test(Strng) Then MsgBox "Invalid Format: TextBox1"
End With
Set RegEx = Nothing
End Sub ..............................
View 9 Replies
View Related
Jan 31, 2014
I'm trying to write a macro that filters a table via textbox (criteria), specifying the column to filter through a combobox. I managed to get it to work with every format (date, text, etc.) except with numbers. I'm attaching the file so you can take a look at the code.
If I have a column containing numbers but the cells have text format and I reformat those cells to numbers (using points to separate thousands [I'm from Venezuela, we use dots, not commas]) the results aren't visible unless I modify each cell individually. How can I avoid this?
Lastly, I'm using a macro that I found online that sets invisible shapes on each cell of the header and asigns another macro to these shapes to sort by ascending or descending order in the column over which the shape is put. I made some changes to the macro that actually sorts the values and it works fine, but sometimes I have to resize the shape (on the left side) so that it's further inside the cell or else I'll get an error.
EDIT: It doesn't work with dates either!
EDIT2: I tried copying the table and the codes to a new workbook and now magically it works with numbers, but still not working for dates. Also I'm still having to resize the invisible shape (only in header of the first column ('C')) and the changes in format still aren't visible unless I modify each cell. I think this last issue has something to do with 'SortOneTime' macro or the 'Ordenar' macro because it happens after I run them.
Tabla General (Nueva) (Combobox).xlsm
View 1 Replies
View Related
Aug 28, 2012
I have several text boxes on a 'picture' which is the format for a business review. The text boxes are linked to cells behind the picture which picks up company names, cities etc...
Two of the boxes have a phone# and date
The linked cells are formatted correctly but obviously the text boxes, pick up the 'values' not the formats.
is there any way for the textboxes to show the values with the proper format i.e.,
xxx-xxx-xxxx
mmm yyyy
View 2 Replies
View Related
Mar 23, 2008
The list columns 5,7 and 9 has number entries.The userform has 3textboxes.is it possible to link total amount of this numbers result into the textboxes.Like column 5"CZ" entries total will showup in textbox10,column 9"DD" = textbox14
Private Sub TextBox2_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim a, i As Long, ii As Long, b(), n As Long
ListBox6.Clear
With TextBox2
If .Text = "" Then Exit Sub
If WorksheetFunction.CountIf(Range("cv:cv"), .Text) = 0 Then
MsgBox "No Entry !"
TextBox2 = ("")
Exit Sub..........
View 9 Replies
View Related
Sep 3, 2007
how to display the result i made in macro to active worksheet so that i can keep a record of the result made in my random generator,
Sub timer()
TextBox1 = ""
TextBox2 = ""
TextBox3 = ""
TextBox4 = ""
Dim x As String, i As Byte
Randomize
x = Format$(Int(Rnd * 1899) + 1, "0000")
For i = 1 To Len(x)
Me.Controls("TextBox" & i).Value = Mid$(x, i, 1)
Application.Wait Now + TimeValue("00:00:03")
Next
End Sub
Private Sub CommandButton1_Click()
timer
End Sub
Private Sub TextBox1_Change()
End Sub
View 3 Replies
View Related
May 18, 2006
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
View 2 Replies
View Related
Dec 28, 2013
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
View 1 Replies
View Related
Jul 3, 2014
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
View 3 Replies
View Related
Feb 2, 2010
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
View 11 Replies
View Related
Jul 25, 2014
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
View 1 Replies
View Related
Feb 7, 2007
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies
View Related
Oct 12, 2011
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
View 1 Replies
View Related
Mar 28, 2013
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
View 2 Replies
View Related
Apr 3, 2014
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code:
If isnull(me.comment.value) Then
Exit Sub
ElseIf me.comment.value = true Then
me.comment_date.value = date
me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";"
me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.
View 1 Replies
View Related
Jul 27, 2014
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies
View Related
Jul 16, 2008
I have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change()
If Me.cmbChooseLevel.Value = "Level 1" Then
Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value
End If
End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."
View 9 Replies
View Related
Feb 13, 2008
I am trying to create a user form that has a series of text boxes that will all have a VLOOKUP function in them based off of input from a the first text box. If I can just get the code for the first one, I think I can figure out the rest. We will say that the file that the user form is contained in is 'Agent Administration' and the file that I want the VLOOKUP to pull from is called ' Roster for Auto Population'.
View 7 Replies
View Related
