Get Focus Set To A Certain Cell And Made Active On The Same Page

Oct 29, 2008

I made a command button on the worksheet from the Tool box. This is not made on a form. When I click on the button I would like to get focus set to a certain cell and made active on the same page. Like cell H2 for example.

View 2 Replies


ADVERTISEMENT

Macro / Change To Run On Active Cell Instead Of Whole Page

Apr 24, 2013

I am still kind of new to using VBA code and my editing skills are very novice at the moment.

How would I change this Code to run on only the active cell selected and that is all, instead of the whole page?

Sub AddIFERROR()
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Dim xCell As Range
Dim xFormula As String
For Each xCell In Selection
If xCell.HasFormula Then
xFormula = Right(xCell.Formula, Len(xCell.Formula) - 1)
xCell.Formula = "=IFERROR(" & xFormula & ","""")"

[code]....

View 6 Replies View Related

Macro To Print Page Based On Active Page

Jun 29, 2007

I need a macro that will print a hidden page that is linked to the page I have active.

It needs to be able to find the correct hidden page that corresponds to the active page because there are multilple pairs of the hidden/visible pages. The name of the hidden page is the same as the visible one with "printout" added to the end. When created, the sheet code names are sheetn and sheetm; n and m being consecutive numbers.

View 3 Replies View Related

Set Focus Back To Workbook While Form Is Active

Nov 11, 2009

I have a userform, when using the form it has focus, once I click on my "Ok" command button I want to return focus to the workbook while I leave the userform open. I already have the userform open and on top of the workbook.

View 2 Replies View Related

Keep Hidden Sheet Made Visible As Active Sheet

Mar 2, 2007

I have a button on a sheet that runs a macro to unhide another sheet. That works, but I want the sheet made visible to remain forward. Instead, the button unhides the sheet and the sheet the button is on comes forward again. I am unable to figure how to keep the sheet made visible forward. Here is the macro 'as recorded'.

Sub UnhideSheet1()
Sheet2.Visible = True
End Sub

View 7 Replies View Related

Printing Only Active/current Page

Jan 3, 2007

I have a workbook with 8 sheets. Two of the sheets have 31 pages (one page for each day of the month). I have to input data every day into these sheets on the current day (ie: If the first day of the current month is Sunday, that is page 1). I have to print out the current days page (not the sheet) after it is complete. Is there a macro or vb code that will print out the current day/active PAGE only? As it stands, I have to do the ctrl+p thing to get the print dialog box, and input the page I want printed....as you know, I have to input the page twice in the dialog box to print only one page, otherwise it starts to print from the page I chose.....and if I don't pay attention, I can print 30 pages when I only wanted one.

View 9 Replies View Related

Identify Active Page Of A MultiPage Control?

Feb 5, 2009

How can I tell (in code) which is the current tab selected on a MultiPage?

View 6 Replies View Related

Active Worksheet Switches To Page Break Preview After Printing?

Aug 7, 2013

I have a workbook with multiple sheets where the view for each sheet is the Normal view.

If I print the entire workbook, the active sheet changes to the Page Break Preview view after the printing finishes.

I have to then reset the view back to Normal.

I don't know why the active worksheet is changing. I don't want to annoy the people who will use this workbook by making them change back to normal view after each time they print.

View 3 Replies View Related

Macro To Publish Print Area From Active Sheet To Web Page

Feb 26, 2009

I am trying to write a macro that publishes the print area as a non-interactive web-page to a file that sits in the same location as the spreadsheet from which the macro is being run.

I am using the the following macro:

View 14 Replies View Related

Excel 2003 :: Highlight Cell On Same Row As Active.cell Whenever Active.cell Changes

Dec 10, 2012

whenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.

This action should be restricted to one sheet in the workbook.

It's for Excel 2003.

View 3 Replies View Related

Selecting Range From Active Cell To Last Entry In Same Row As Active Cell

Jun 8, 2014

I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.

The code I am using is:

[Code] .....

The code that is not working and bringing up an error is:

[Code] .....

Attached File : Copy of Testexample.xlsm‎

View 2 Replies View Related

Set Focus To A Particular Cell

Jan 6, 2004

I am writing some VBA, and this is what is going on:

I display a form which asks the user to insert the desired number of invoices. After inserting the number, I would like a the cursor to appear in a textbox labeled "Invoice Date" (ref A28). Additionally, I would like the user to only have to key in the day and month. Therefore, I would like to have the cell be defaulted to / /2004.

View 9 Replies View Related

Sub To End And Select The Cell Where The Correction Needs To Be Made

Jan 19, 2009

I need to step out of a macro based on a user respone, and I don't know how to end this macro if the user needs to correct a cell entry.

If they respond "no", I want to sub to end and select the cell where the correction needs to be made.

View 8 Replies View Related

Page Break Preview It Shows The Page Numbers In The Centre Of The Page

Jun 9, 2009

When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.

View 3 Replies View Related

Add Color To Cell Based On Selection Made

Jan 5, 2009

I've tried to do conditional formatting for each of the "Discipline" values in this spreadsheet but it is restricted to only 3. Is there a way around this? I'm trying to setup a color code for the "Discipline" values for example RN=Red, LPN=Blue, Social Worker=Orange, Chaplain=Purple, STNA=Yellow, Volunteer=Pink & Other=Green. So when the "Discipline" cell/cells on each of the patient sheets (ie. "Doe, Jane", "Doe, John", etc.) is equal to say RN the cell would then turn Red either on the spreadsheet or only when sheet is printed.

View 5 Replies View Related

Identify The Cell Address Of Last Change Made In Sheet Using VBA?

Aug 13, 2012

I am using an event macro to trigger a set of calculations. In the spreadsheet, users have a choice of 3 input cells to work out an answer; these 3 cells work out the same cost from different angles depending on the variables available to the user.

Users only ever need to fill in one of the three cells to work out the answer as the event macro I designed, should (upon input by the user), work out the remaining two input cells using logical arguments.

The macro and calculation work fine, except in the event of users amending a value in an input cell previously updated; in other words, if all 3 cells contain a value and 1 of them is being changed by a user.

The issue: I need the event macro to recognise the location of the last change made by the user in order to determine which 2 of the 3 cells need to recalculate. However, users will invariably press enter or tab etc... upon making changes and this has caused me issues so far.

What I have tried already:

1) running another event macro "on selection change" to record elsewhere in the model all cell selections as and when the user interacts with the model

EFFECT: it made the "on change" event macro very slow and clunky; so I need to avoid
2) declaring a range as set r = activecell.address

EFFECT: this did not work as the active cell's address would in fact be the address on the last cell; e.g. the one selected further to pressing enter (often the one directly below the cell recently changed)

A solution to add to the existing "on change" event macro that identifies the last edited cell

View 8 Replies View Related

Change Text Colour When Entry Made In Another Cell

Jan 10, 2010

I am using Excel 2003, my problem is that I have cells D4 & E4 with red text, when an entry is made in B4 (say $640, the amount can vary) I want the text in D4 & E4 to turn black. I have attached a section of the document in question.

View 5 Replies View Related

ComboBox And Get Focus Back To Sheet Or Cell?

Oct 24, 2012

Code:
Private Sub ComboBox1_Change()
ActiveCell = Me.ComboBox1.Value
End Sub

How do I get focus back to the sheet or cell instead of the ComboBox ?

View 1 Replies View Related

Cell Focus When Opening A User Form

May 9, 2007

i would like to retain the focus of the current cell before the user clicks on a button to run a macro (see below) to open a userform...?

userform.show

(the cell focus seems to disapper...after the button is clicked, but does stay on the cell when i run the macro from tools macros...)

View 5 Replies View Related

Formula To Find Value Of Cell Based On Selections Made In Two Other Cells?

Feb 2, 2014

I am making a form with drop down boxes and auto fill to make things easier. I have one Box for the Company selection another box for the occupation selection and I need a formula to find a $ value based on the selections made in these two cells. If I could establish the actual cell reference of the selected data in the second drop down list. The data will be much larger than this example and will live on a separate sheet.

View 2 Replies View Related

Can A Macro Take Focus Away From A Cell And Not Plae It On Another Cell

Dec 8, 2009

I use this code to copy the contents of a cell to the clipboard - thanks to the fine people who answer m stupid questions on Mr. Excel.

Sub Button36_Click()
Cells(2, 4).copy
End Sub

This works fine but leaves the cell highlighted with the blinking border. This will confuse the people who use my file. Is there a line of code I can add to this little macro that'll keep the cell from being highlighted?

View 9 Replies View Related

Change The Cell Focus Based On Month And Year

Jan 22, 2010

I have a worksheet called "zz_Exchange" that contains the exchange rate for my company for each month of the financial year. I am using this info in a summary page that uses the data for multiple calculations in the workbook.As we pass each month I would like to move the focus of a cell in the summary sheet to the relevant month in "zz_Exchange"

The column names are "currency_code" (USA Euro etc),
"currency_year" (09, 10)
"period" (1-12)
"exchange_rate" (this is where the data is held)

View 4 Replies View Related

Put In Error Handling In Case The Format Of The Page Changes Or The Internet Page Is Unavailable

May 18, 2006

I have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.

Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................

View 6 Replies View Related

Can't Move Page Breaks In Page Break Preview

Mar 26, 2006

I suddenly can't adjust my page breaks in any Excel spreadsheet while in Page Break Preview. Is there some option to turn it on and off?

View 7 Replies View Related

Print To Fit All Rows And Column On One Page And Take Up Entire Page?

Oct 16, 2013

I have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.

View 4 Replies View Related

Printing One Page Grayscale And One Page Color With Code

May 21, 2009

I have a report that I use and right now I have a command button that prints the report x2. What I would like to do is to have it print one in color and one in grayscale. I could do this I think with two different buttons, but I would like to utilize just one. I tried creating a macro but it did not pick up the fact that I changed the properties to black and white.

View 2 Replies View Related

Countif Formula: Take Data From One Page And Graph It On Another Page

May 1, 2009

I am looking for a formula that will take data from one page and graph it on another page. The data I am trying to graph is arranged like so:

A B

1 q 2009.05.01
2 w 2009.05.02
3 w 2009.05.01
4 q 2009.05.01

I am looking for something that will look at column A and if the answer is "q" and then look at column B and if the answer is "2009.05.01" Excel will take that and count it in a specific cell on another page. In the case above, I want Excel to give me the answer of "2" in a designated cell.

View 3 Replies View Related

Change Start Page Of Multi Page UserForm

Jul 23, 2006

Is it possible to Change Start Page Of Multi Page UserForm Based on 8 CommandButtons. on a WorkSheet, for example.

CommandButton1
UserForm1.MultiPage1.Value = 0
CommandButton2
UserForm1.MultiPage1.Value = 1
CommandButton3
UserForm1.MultiPage1.Value = 2
CommandButton4
UserForm1.MultiPage1.Value = 3

Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?

View 2 Replies View Related

Transfer Specific Data On Each Page To A Different Colum On That Same Page

Mar 15, 2007

I have a workbook that has 9 different tabs in it. Once all the information has been completed throughout the workbook, is there a code that could transfer specific data on each page to a different colum on that same page? I need to do this for 9 pages at one time. The information is listed differently on each page. I need to transfer data from the current data column to the previous data column once the entire workbook has been filed out.

View 2 Replies View Related

Remove Page Numbers In Page Break Preview

May 18, 2007

how to get rid of the page numbers that appear when using page break preview mode. The page numbers appear in large grey font in the middle of each page and sometimes makes it difficult to read cells. Can I use this view with all the same functionality without that one feature?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved