I'm trying to get a random prize draw working with in excel. My worksheet structure as follows.
A1 person's name
B2 points obtain by the person.
A1 B2
John 10 points
Ken 20 points
Amy 30 points
1st draw. If random number result between 1 and 10 display John wins then delete John's entries.
2nd draw etc... and delete anyone that has already won a prize.
With the following code I found on this forum it partly works. It only randomly select a cell but missing displaying the winner and removing it afterwards.
I was looking for some code to randomly generate a number for a prize draw I am doing. I found a great piece on this site, which I have slightly changed to give me what I have below.
It works great except for one thing I cannot work out, I have the code below working on cell "C1", I would like it to work in cell "C5", but I can't seem to work this out.
Sub SlotsNum() Dim w As Long, x As String, y As Long Randomize x = Format(Int((Range("B2") - Range("B1") + 1) * Rnd + Range("B1")), "0000") For y = 1 To 1 For w = 1 To 250 Range("C" & y) = Int(8000 * Rnd) Next w Range("C" & y) = CInt(Mid(x, y, 4)) Next y End Sub
Also, whilst here. i will have one other problem, with it being a prize draw I do not want to draw the same number twice. At the moment I have a small macro that copies the winning name that appears on the main screen (via a vlookup) onto a winners spreadsheet. I am thinking of then creating another macro that replaces the winning name on the master list with an "Already Won" entry, so we can just select again.
I have the below code that i am using to generate a random number between a user defined lower limit and upper limit (these limits are set in cells "B3" and "B4" in worksheet "DRAW"), the random number that is generated displays in cell "B7" on worksheet "DRAW".
The code also allows for the draw result to be stored on a second sheet called "DRAW HISTORY", on this sheet the draw result, date and time are recorded (the date and time are stored on sheet "DRAW" in cells "C20" & "C21" and these values are pulled to the result sheet by the macro).
What i would like to happen though is instead of the random number displaying instantly i would like the numbers to cycle for 3 seconds before stopping and the result being recorded. A much better visual effect than an instant BANG here is the winner.
here is the code i am using to generate the random number and record the result:
Sub testRandom() Dim aRow As Long Sheets("DRAW").Range("B7") =
I have to draw a polygon of n sides whose , whose length of side will be given in the cells of excel and the diagram should be displayed in excel itself automatically
Like I have A1=5 A2=5 B1=4 B2=3 C4=5
Then diagram should be like in the attachment : Untitled5.png
I want to put a length in one cell and a width in another. Then have excel draw a square/ rectangle to this size. It could just outline cells, each cell being one inch or any other way.
I am new to Excel VBA and am trying to create a macro that will draw information from a spreadsheet. The code i have written so far is shown below:
Sub Event1() 'Dim Event Date As Double Dim Message As String Dim Ans As String
' Prompt for Data
[Code] ......
The section i am having issues with is shown in red above.
What i am trying to do is have a message box pop up with the information as shown based on a date being typed into the the original box that pops up (Please enter a date and click on OK). The following message box then displays the required information from the spreadsheet.
I have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.
Private Sub Worksheet_change(ByVal target As Excel.Range) If target.Column = 1 Then ThisRow = target.Row startRow = 1 i = 1 Set ws = ActiveSheet maxRow = Cells.SpecialCells(xlLastCell).Row maxCol = Cells.SpecialCells(xlLastCell).Column ActiveSheet.UsedRange.Interior.ColorIndex = xlNone Do While i
I'm currently working on my masters dissertation and am using excel 2010.
Basically, I'm trying to generate a list of say, 1000 numbers within a range. I can already do this using the rand() function. However, I need excel to take each random number, apply it into a formula, and then list the answers in a seperate location. This would be easy to do if there was one simple function (which i could just insert into any adjacent cell). The problem is that each random number value is input into a table. The table, which has about 10 columns and 200+ rows, gives one final answer.
I'm sure there has to be a faster way than creating 1000 tables for each random number generated.
Let's say I have a list of 1000 random numbers in sheet 1. the function table is in sheet 2 and produces the answer in the same sheet, in a single cell. I'd like excel to use each random number generated, input it into the function table, attain the answer from the table, and list it in the cell next to the random number.
I'm currently working on my masters dissertation and am using excel 2010.
Basically, I'm trying to generate a list of say, 1000 numbers within a range. I can already do this using the rand() function. However, I need excel to take each random number, apply it into a formula, and then list the answers in a seperate location. This would be easy to do if there was one simple function (which i could just insert into any adjacent cell). The problem is that each random number value is input into a table. The table, which has about 10 columns and 200+ rows, gives one final answer.
I'm sure there has to be a faster way than creating 1000 tables for each random number generated.
Let's say I have a list of 1000 random numbers in sheet 1. the function table is in sheet 2 and produces the answer in the same sheet, in a single cell. I'd like excel to use each random number generated, input it into the function table, attain the answer from the table, and list it in the cell next to the random number.
Im looking to create random data for an athlete over about 4 months with daily tests, however when im using the =randbetween(*,*) function the data is too 'Random'. so im looking to create a trend in the data, like real athletes will have. is there a function in Excel 2010 that can do this?
The boundaries of the data are -336,416 (i know its quite a big range)
I want to generate random times in excel between upper and lower limits , which i can do , but i also want dates in same cells with out randomization , means dates should act independently and time should randomize
it should be something like that
8/1/2013 05:55 AM 8/2/2013 07:55 AM 8/3/2013 04:44 AM
I am working on a Random Cycle Count Generator that provides random SKU#s based on 3 separate columns of SKU listings. The user clicks a button to generate the SKU#s to cycle count for that day. What I would like to see is a date stamp in the columns next(B,D,F) to the referenced SKU listing(A,C,E) based on which SKU#s are generated. This will let me see the last date that the SKU was generated. I would also like it to automatically save after generating.
How do I create a 6 digit unique random number for use as an ID in column A. Once created the rows with preexisting 6 digit unique random ID numbers must not change every time new rows are added.
I am trying to create challenge/response cards. Each card will have a 5-digit number in the upper-left and lower-right corner along with a series of rows containing a line number and 3 pairs of challenge/response words.
Rather than have have copies of these cards, I want the central office to have a macro-enabled workbook wherein they can enter the two numbers from the card and have the challenge/response matrix regenerate on a worksheet.
So, essentially, I want the challenges random number generator seeded from one of the 5-digit numbers and the responses random number generator seeded from the other 5-digit number.
I am trying to use
Code: Randomize(Seed) where Seed is one of the 5-digit numbers.
The problem appears to be that, no matter what I use for Seed, the RND(-1) function is not resulting in different numbers.
i have a problem in that i need to generate a random 6 digit number preceeded by an X if the data in column B is either blank or 0. This needs to be filled in if the adjacent cell in column C has data in. i am a moderate macro writer and am finding this part quite challenging.
I notice that sometimes the "Go To" function does not work. When I click on the named range Excel just brings the cursor to a the first cell of a worksheet rather than the actual cell/range. I find that I need to restart Windows in order to fix this. A simple restart of Excel does not work.
Is it possible to add horizontal lines to a user form, like as shown in the attached image. I know about frames, but unsure how to get just one horizontal line.
i have faced a problem i want to draw straight connector using code imagine when you select straight connector to draw line mouse cursor changes when you move it to a node i want to do this with excel vba code without going to shapes and selecting connector.
I have this Command button that switches on and draws a line. If you press it again then I need to delete that line.
If I push the button multiple times Excel keeps changing the name of the line. I have multiple lines on the same worksheet and text boxes but only this 1 line needs to be delete. I would think that theres a way to assign a permanent name to this line and delete and recreate it but...
I have a 5-column listbox in a userform. I do not know how to make the column borders visible. If somebody can tell me, that would be great.
If not, then the next alternative would be to manually draw a line. I tried to so one, by creating a Label with a width of 1, and backcolor ot black. This works but not in front of a list box. For some reasons it cannot be brought to front/forward (order) of a listbox, I already right-clicked several times and sent tthe order to front.
I have attached a very simple example of what I am trying to achieve.So we have 2 sheets. a sheet called data and a sheet called results.
the data sheet, includes ID's of employees and what they are measured on - Hours and Accounts Finished.For example, worker 123 put in 100 hours from the 200 expected and finished 100 accounts from the 200 expected. The main sheet called Results looks up in a list every ID and displays in a table the compensation the worker got. Each time you select from the drop list a different ID number it shows the result and the amount of money they got.
I want to be able to draw every worker and display the compensation they got('Results', H11) in the Pay amount column('Data',H3:H11).
