I have an excel sheet that has a lot of APN (parcel numbers) on it. I would like to run that through the assessors page [URL] to get the address and owners name. It seems like a very simple thing to do, but... How would I make it run each parcel through the assessors page to get the name and address information.
View 1 Replies
I have an address list of 64,000 entries that I want to geo-code (the geo-coding isn't the problem...). A large % of addresses don't have street numbers and this just gives a general position based on the Post/ Zip code which isn't accurate enough - it needs to have an actual street number. I want to extract all of the addresses without a street number so I can cross check them with something else (not an Excel problem). Trouble is some of the street numbers are embedded in a string - might be a multiple NOT problem. Attached a sample file...
View 4 Replies View RelatedI'm trying to create an Excel sheet to display MAC addresses in the following format -
00:00:00:00:00:00
However. the characters can be either letters or numbers. I've modified the "hh:mm:ss" template to accomodate the format I need, but it will not recognize letters for the obvious reason. Is there a wildcard character that I could use in this format or has anyone created a format that would meet my needs? If I can pull this off, it could mean a promotion.
I have a few hundred addresses in excel in the following format
NameAddress1Address2Address3AreaCityPin
Is it possible for me to change that into
Namee
Address1
Address2
Address3
Area
City-Pin
I have a list of addresses (including street numbers and names), but want to select out addresses that match another list of street names only. I have only used vlookup before, but because one list included street numbers as well, I can't find exact matches.
I am using excell 2007.
I have a form in which a user selects a Suburb, a State and a Post Code (each from a Data Validation List)
Suburb /Town StatePost Code
The 15,000 Suburbs with their associated Post Code and State are correctly sorted on a seperate worksheet in their 3 columns.
The Objective: To determine if the User has correctly chosen the correct matching Suburb, State and Postcode from the 3 Lists.
Problem: I know it is possible to concentate the 3 together and have one List but I do not want to do this I want to meet the objective.
When using VLOOKUP, because their are many Suburbs with the same name and different Postode.... or Same Postcode with different Suburbs etc I am finding it difficult to get an exact match because the VLOOKUP selects the first correct value it finds.
Question: Is it possible to write an IF statement with VLOOKUP to get an exact match across the 3 fields?
I'm working with a pre-existing list of vendors and currently the addresses for each are in one column. I would like to separate by city, state, zip. I was thinking of text to columns but since the addresses are not all aligned that won't work.
View 9 Replies View RelatedAny quick way to sort this list of IP addresses?
10.198.16.206
10.198.16.220
10.198.16.248
10.216.100.21
10.216.101.22
10.216.102.21
10.216.103.24
10.216.104.23
10.216.105.22
10.216.105.32
10.216.106.21
10.216.106.31
10.216.107.27
10.216.108.27
10.216.109.23
10.216.11.101
10.216.110.27
10.216.111.21
10.216.111.24
10.216.112.29
10.216.113.49
10.216.113.52
10.216.117.20
10.216.11.101 comes after 10.216.109.23 when Excel sorts the data. I understand the problem is that these are not numbers, they are text.
I have 2 issues i am trying to work through, i have a spreadsheet with 3 data sheet tabs, the first issue i have is in Data sheet 1 I have a lot of duplicate addresses, I was wondering if there is a way to filter out the duplicate addresses so that only one of each address is showing.
Issue 2 that i have is a lot more complicated, In data sheet 1 i have a list of medical providers that reimburst at 110% or more, each address on that list needs to get 1 letter mailed to them, but i have to keep track of how many are going to each region, i.e. Columbus, OH region, Cincinnati, OH Region, Toledo, OH Region, and Cleveland, OH region. So what i want to do is create a 3rd data sheet that keeps track of total letters sent by region, but was wondering if it was possible for this info to be automatically transfered from data sheet 1 to data sheet 3. I don't need all the information in data sheet 1 to tranfer to data sheet 3. All i need is for data sheet 3 to read off the City field in data sheet 1, and calculate 1 letter sent to that region.
I dont even know if this is possible, but it is way beyond my realm of excel knowledge which isn't much.
Any help would be appreciated. I am trying to attach the spreadsheet, however it isn't allowing me to attach it, i keep getting a database error, when i upload it. It is under the max size limit too. Not sure what's going on.
I have a table that looks like this:
| A | B | C | D | ...
1 | fu | bar | lab |...
2 | rab| uf | luv |...
3 |...
All of my values are within the Range "A1:C2"
I would like to have a variant array which contains the addresses of this range.
Things I tried that didn't work:
If my variant is V and my range is R,
v = r returns an array which contains
fu|bar|lab
rab|uf |luv
V = R.Address gives me
A1:C2|A1:C2|A1:C2
A1:C2|A1:C2|A1:C2
What I actually want:
A1|B1|C1
A2|B2|C2
i know this can easily be done with a loop, but the table I want to use this on is huge, and a loop takes hours to execute.
I have two columns of from and to addresses in excel.These are complete addresses with apartment name and pincodes. how can I obtain the distance in km between the two addresses (Both are in the same city) I have used the code in the following [URL].However it seems to give me 0.
View 10 Replies View RelatedImagine i have 2 columns: Open and Close, both of these got numbers like
1 ---- 2
3 ---- 1
4 ---- 10
and so on. I had to make a function which checks if some number is in between any of those Open and Close numbers and count how many, for example: im searching for number 1.3, so according to previously drawn table i would get answer of 2, because 2 is in between 1----2 and 3-----1, i achieved this by a simple function:
=IF(OR(AND(Bendras!$J$1>=Table1[[#This Row],[Open]],(Table1[[#This Row],[Close]]>=Bendras!$J$1)),AND((Bendras!$J$1<=Table1[[#This Row],[Open]]),(Table1[[#This Row],[Close]]<=Bendras!$J$1))),TRUE,FALSE)
this generated an additional column with TRUE and FALSE values which i counted with:
=COUNTIF(Table1[T/F],TRUE)
and got the answer.
so now then preparations are ready i need to make a function which would for example if the number i was searching was in 10th and 45th rows find the MAX/MIN values of Close column between those rows(hope i made my self clear)
this is how i was hoping to do that : first of all make a new array of all cell addresses from "Close" column which were "TRUE" from the first function i wrote and when do w/e i like with those cell addresses in other functions.
Sheet1, Column3 is filled with property addresses, if available (some are blank). I need two columns on Sheet2, Column3 needs to be the street number and Column4 needs to be the street name.
Because it is not 'fixed length', I can't use 'RIGHT' or 'LEFT'
I have attached a sample file. There is other data/information on the sheet, but I can process the rest without help. I will be moving:
Sheet1, Column1 to Sheet2, Column2
Sheet1, Column2 to Sheet2, Column1
Sheet1, Column3 to...as described above...
In the address list, some addresses have individual names, some have all Smith or Jones, and some have Smith, Jones, Garcia.
(See attached file)
How can I mark them as "individual", "Family", Household"?
I have to separate reports. The first report lists the address in 5 columns (house #, Street, City, State, Zip), and the second lists it all in one column. Right now I have to manually check the second report against the first report to see if any of the addresses match. I do this daily, and it's rather time comsuming.
View 4 Replies View RelatedI am trying to do is summing a range based on a text value that corresponds to a cell address. I have a adddress cell value in say a1 = A$1$ and in a3 = A$10$. If I do a sum function where I want to use these cell values i.e. I use this formula but it does not seem to work, any insights?
SUM(Text(a1;"Text"):Text(a2;"Text"))
I'm trying to write a Macro that searches all non-blank worksheets of multiple workbooks in a folder for any IP addresses contained within then returns them all to one master spreadsheet.
I've already come up with the code to open each workbook from the master. What I really need is some direction for how to go into each non-blank worksheet and search each one, placing all IPs that are found into a single column in their respective worksheets, say column D for example.
Since I'm not looking for a specific value I assume I'll need some wild card like *.*.*.*
I have a list of email addresses with the periods stripped before the .com, .net, etc.
How to insert the period to go from example@mailcom to example@mail.com? Obviously the email addresses are of different lengths, but it's always 3 characters after the inserted period.
When I move the range rDes, another range rOrig with the same address gets changed. How can I prevent this?
Code:
Sub Macro1()
Dim rSrc As Range
Dim rDes As Range
Dim rOrig As Range
Set rOrig = Selection
[Code] ........
I have tons of addresses that I need to separate into different columns. It should be easily done by using Text to Column but the format is different so it didn't work.
1198 W 1520 N
CLINTON, UT 84015-5301
1198 W 1520 N
CLINTON
UT
84015-5301
798 HOMESTEAD AVE
HOLYOKE, MA 01040
798 HOMESTEAD AVE
HOLYOKE
MA
01040
16765 KENUIL CT
BRIGHTON, CO 80603-8481
16765 KENUIL CT
BRIGHTON
CO
80603-8481
The addresses are copied from a website so it is formatted as 2 lines. Tried to copy and paste (values only) to another sheet and the format was like this:
1198 W 1520 NCLINTON, UT 84015-5301
No space between "N" and "CLINTON".
This time I have exported messages from Outlook to Excel in an attempt to extract email addresses that are held within the body of the email. An example ofthe email body is this:
This is the qmail-send program at lon5.mailcustodian.co.uk.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up.
:
212.
All of this is held in one cell with line breaks as shown above. Is there a way of getting Excel to recognise an email address and plonk it in the cell nextdoor? Something like 'find the @ symbol and extract before and after until a space is reached'?
There are a lot of different styles of email body, therefore find and replace would be a very time consuming excersise.
In column AB i have a massive list of email addresses i want to capitalise the first letters of fist name and surname like:
adam.adam@nowhere.co.uk becomes Adam.Adam@nowhere.co.uk
But they could also be like this adam.2.adam@nowhere.co.uk so they wont always be in the same format.
I have a formula in another column which snatches the name from the email address then a maco which creates a mail based on this i need the email address first and last name to be capitilised so the mail created has the correct case: Dear Adam and not Dear adam.
I have voter registration pdf where I can open the table of info into excel when I can edit it. When I try to sort the addresses from low to high. example I have 3 main st, 20 main st, 78 main st, 300 main st. When I try to use sort to arrange them from low to high it does not work correctly do you think I am having a problem when adobe opens it to excel or am I doing something wrong?
i have a 2D array of numbers (7 columns x 30 rows which doesn't change size nor place in the book).
I have the address of the "starting" and "ending" cells of the area I need to sum (often in more than one row) squeezed between other tables which must not be part of the calculation.
How can i get the sum i need without macros?
Ex:
||A|B|C|D|
|1|1 7 5 0|
|2|5 6 8 4|
|3|2 6 7 4|
|4|8 4 5 3|
Sum from B2 to C4 = (6,8,4,2,6,7,4,8,4,5) = 54
I'm trying to draft together a simple VBA script or even =HYPERLINK string to utilize a range of cells in Excel for the To: field in an Outlook email.
I have 7 columns each with categorized for different individuals in different departments.
Instead of dealing with contact groups, I have created a spreadsheet that breaks down the departments and supplies the email address for everyone in the department.
So, what I want to do is make a link or button for each group that when it is clicked on will open a new email via outlook with all of the addresses in the appropriate range in the To: field.
Example:
Cell: A1 is the heading
Cell: A2 is the link/button you would click on
Range: A3:A255 would contain the addresses.
One other thing, I'm not positive if this is an issue or not...The script might need to add the customary semicolon and space after each address added to the To: field...As needed when using multiple addresses in Outlook.
We create bids on a spreadsheet and these bids are faxed to up to 20 contractors. It is a pain to keep having to type in a contractors name and address, phone... and then print and then delete that info and type in another contractors name, address...on the same bid sheet. Is there a way for me to create a drop down list that shows the contractors with their name, address, phone/fax number so that all I would have to do is click on the dd list and pick who I want? I know the basics of creating a dropdown list but I have no idea how to create one with so much info.
View 4 Replies View RelatedExcel VBA. I have a problem which is frustrating me almost beyond measure, but I am convinced that the answer is a simple one.
sub a() copies the values of 3 non-contiguous cells and pastes them as contiguous cells. This is simple as the cell addresses to be copied are absolute.
VB:
Sub a()
Dim x As Integer
x = 6
Range("A1,C1,E1").Copy
Cells(x, "H").PasteSpecial Paste:=xlPasteValues
End Sub
Sub b() copies a range of contiguous cells, including empty cells, and pastes them as contiguous cells, including empty cells. This is simple because I have specified a "range" of cells with variable addresses.
VB:
Sub b()
Dim x As Integer
Dim y As Long
x = 6
y = 1
Range("A" & y & ":E" & y).Copy
Cells(x, "H").PasteSpecial Paste:=xlPasteValues
End Sub
However, what I really want to do is copy 3 non-contiguous cells with variable addresses similar to sub b (ie. 'A' & y, 'C' & y, 'E' & y) and paste them as contiguous cells (without empty cells) as in sub a ().
What is the correct way to specify the cells to be copied?
I have list of many addresses. Then I have different dates related to addresses witch I insert myself regarding colaboration with specific person on that address. Each week I have to make list of all addresses that have the same date. Since manualy this is quite hard to do, I was wondering if I could do it automaticly.
I am attaching sample of what I am talking about. exporting addresses template.xlsx
Website has a URL where the last element is a number within a range (e.g. 1000 - 4000).
But the numbers are not sequential (e.g there are 100 pages, first URL ends "1001", last one ends "6000".
As shown below I set the code to cycle through every possible number:
VB:
For i = 1001 To 6000
With ActiveSheet.QueryTables.Add(Connection:= _
"URL;http://(whatever)" & i _
, Destination:="(Whichever cell the output starts in)"
Not the most constructive use of the national grid.
Is there a VBA that can check whether the URL "number" is genuine before doing anything else - and move straight to the next "i" if it doesn't exist?
I have the attached spreadsheet that has 176K of addresses. The cell contains data that is actually Address Line 1 and Address Line 2. I need to separate these. I believe there is an unprintable character that separates most of them -- maybe a CRLF or something like that.
See the attachment for examples ... Cust Address with unprintable characters.xlsx
