I need to display two separate values from a given input, but not exceed a specified number for that cell. I have this so far except for the maximum number that can be displayed; Example for what I want below ....
View 8 RepliesI have a userform with a textbox1 on inputting the numbers 1-9 the code fires to open that qty. of worksheets it works fine. But, why if the user wanted to input 10 it reads the 1st number 1 and only opens 1 sheet. I need it to open another userform if 10 or greater is input.
Option Explicit
Private Sub Userform_Initialize() 'CALCULATES # OF SHEETS
ThisWorkbook.Unprotect
ActiveSheet.Unprotect
I am trying to create a macro which gives me an input box. I need to enter 2 numbers into the input box. It would be as follows:
Input Box Msg 1 - "What is your labor cost?" (NUM1)
Input Box Msg 2 - "What is your productivity rate?" (NUM2)
Then I need the macro to take this info and enter it into a formula which changes according to the row which you are on. (I need the macro to work based on which ever cell I currently have selected). The formula would be this if I currently had a cell on row 10 selected:
=(NUM1*(NUM2*$H10))/$H10
So, if I currently had cell L10 selected, and I ran the macro and put 100 in for "NUM1" and 10 for "NUM2" and my sheet had 20 in cell H10, then the macro would enter the number 1,000 into cell L10. If I had L500 selected, then the macro would enter the final number into cell L500 based on what value H500 contained.
I have this table with min and max amounts that requires a fixed amount when when the condition is met. How do I write a formula for this. If result is >$0 but < $100 = $15 and so on. I canlt get it right..........
View 3 Replies View RelatedI have the following values that I need to perform a calculation on, but I am not sure how.
A1 = -.98
A2 = .98
A3 = 1.0
I would like the results in colmun B to be:
B1 = 1.02
B2 = .98
B3 = 1.0
I would like to achieve this with a formula that I could fill down.
I need a formula, If the number is greater than 1 and less then 30, it returns Yes, if not, then no.
Need the formula to find any number from a range under this format 00:00:00, Greater than 04:00:00 but Less Than 12:00:00.
View 5 Replies View RelatedBelow is my formula that works for a specific date. F$8 is the date.
How could I change this if I want data b/w two time periods.
>=F$6, and <=F$8?
[Code] ....
Column B is basically 550 points + column C = Base Roll.
We need to introduce a cap so no more than 1000 points can be displayed/earned. So column G adds all points & column F caps.
So far it's all ok.
Now when i add a value to column E (points spent) those points are deducted from column G instead of the capped 1000.
Entering a value of 500 displays 800 in column F instead of 500.
I'm trying to find a formula to use for a specific numerical outcome. For example say you have two teams playing throughout the year and you've made a prediciton on the results. If your prediction is correct your awarded 7 points if you predict a win its 3 points and if your incorrect than it's zero. what is the formula for awarding points?
I've attached the spread sheet : FIFA Spread sheet.xlsx
When grading children's test scores I want to apply letters and numerals to particular ranges eg between 21 and 25=3c 26and 30=3b. Please help with a formula.
View 14 Replies View RelatedCurrently I am using the following formula ....
View 9 Replies View RelatedI have a range of weekly sub totals that get entered each week for the year.
o8:bn8
As each week are entered I am trying to find the lowest week's production (using the =min formula) that is above 0 (weeks not yet entered appear as 0) the problem is that it keeps defaulting to the next column once a number greater than o is entered.
I need a formula that looks at the total in H40 and if the number is between 32 and 40 I need it to return the number then if the number exceds forty I need to multiply the overage by 1.5 and add it to the 8 for a total of 11.
I think it would be something like:
SUMIf(H40>"32",
I have a time value h:mm in one cell and I have a range of three cells that I want to display values depending if the time is:
under 12 hours
over 12 hours and less than 24 hours
over 24 hours and less than 36 hours
over 36 hours
I have been using the following formulas where A1 holds the time value:
=IF(A1<12,"true",0)
=IF(24>A1>12,"true",0)
=IF(24>A1<36,"true",0)
=IF(A1>36,"true",0)
None of which seem to work
NumberABC D Value to be returned
1 -10050 0 C
2 156.6700-31.34A
3 104.5800-20.92A
4 -6.2000 #NA
5 0 -3500 #NA
6 132.800-33.2 A
7 0 1000-50 B
What formula i need to apply so that i get values which are in column "Value to be returned"
formula stating that:
if a number is greater than 1 add one 1 box (250) and if the number is greater than 9 add 2 boxes and is its greater than 18 add 4 boxes
i want this all in one formula,
I want to create a formula which will add 0.20 to the value of a cell if its greater then 0.
Basically i have a list of cells some of which will have a value and i want to sum this list and add 0.20 if there is a number in the cell.
I am trying to create a quoting system and basically its a list of rooms etc with the wall lengths and i am adding 0.20 to each wall to allow for excess but for example if there are no measurements in bedroom5 i dont want the 0.20 added.
I need a formula that will divide a number and if the answer is greater than a 100 then blank.
i've been using this =IFERROR(SUM(H4/C4,"",IF(K4>100,""))) but no luck.
I'm getting a mismatch error on my If activecell.value > 5 Then portion of this code. I'm trying to say if the value in column AG is greater than 5 then create an email address from the first and last name. I've even made sure to copy and paste the formula results as values.
Code:
Sub CheckPFPDates()
Dim OutApp As Object
Dim OutMail As Object
Dim cell As Range
Dim emails As String
Dim salution As String
Dim currenttime As Integer
[Code] ........
If the total is >= to x but =(I10*0.9),"Over 90% spent",IF((M10+T10+AA10+AH10+AO10+AV10+BC10+BJ10)>=(I10*0.8)&(M10+T10+AA10+AH10+AO10+AV10+BC10+BJ10)
View 3 Replies View RelatedHow do I use the SUMIFS formula for ranges greater/less than some number?
In my spreadsheet I need to sum the values that are less or equal to January 1st, for example. How do I do it? Because this formula allow to find values equals to something.
I have this formula
=IF('Senate 1'!K10="",'Senate 1'!K$8,IF(S10>'Senate 1'!K10,S10,""))
what am hoping i can get it to perform is have S10 replace it self each time a greater value is inserted in Cell S10.
I have to make a table that shows that a if someone purchases
less than 5 items they receive no discount
5-10 items they receive 2% discount
11-20 items they receive 5% discount
21-50 items they receive 8% discount
over 50 items they receive 10%
and it has to be done in a way that the discount rate can be calculated using Vlookup I am struggling to find the best way to write this table. i tried numbering 1 to 50 and writing the corresponding discount rate in the second column but this looks untidy and can't calculate greater than 50 as i am not sure how to write it in the cell so it reads as >50 and not just 50.
Formula to pull the lowest number that falls in Cells I2:L2 and the number must be 0 or Greater. Some of the numbers might be negatives and I am trying not to pull those numbers.
View 3 Replies View RelatedI am building a spreadsheet to manage 15 folks wages to be able to know how much money has been spent.
We routinely work 40 hour weeks and have a sheet that automatically multiplies hour work by person (Say A1) times their hourly rate (say A2)
My question is how could I right it a formula that allows me to type in their hour work (A1) if it's greater than 40 hours?
Say A1 is 40, A2 =$20.00, A3 =(A1*A2) $800.00
If the A1 is 43 what would I put into A3 that would automatically multiply the additional hours over 40 times 1.5 A2
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
My formula is =IF((C2+E2)>D2,"WIN","LOSE") the new formula if I wanted the cells with "WIN" to be green, and the 'LOSE' cells to be yellow. Excel 2010
View 6 Replies View RelatedCurrently, I am using countifs to count data within a specific range if it meets a criteria. Now I want to add to the formula. I need to count the cells within the specific range meeting the existing criteria I already have but only if one cell is greater than another cell.
This is what I currently have: =COUNTIFS(Report!$F$4:$F$1048576,">=8/1/2013",Report!$F$4:$F$1048576,"=8/1/2013",Report!$F$4:$F$1048576,"
SUMIFS with less than & more than
I found this thread which works for normal ranges
I want to Sum for Values Greater than a specific date in my formula.
This first one works for a specific date (Relevant reference in red), so say 01/01/2014
Code:
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
Code:
To Sum for ranges >= 01/01/2014, I have tried this below based on the thread above but Excel does not accept this.
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
">="Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])