I have this formula
=IF('Senate 1'!K10="",'Senate 1'!K$8,IF(S10>'Senate 1'!K10,S10,""))
what am hoping i can get it to perform is have S10 replace it self each time a greater value is inserted in Cell S10.
My formula is =IF((C2+E2)>D2,"WIN","LOSE") the new formula if I wanted the cells with "WIN" to be green, and the 'LOSE' cells to be yellow. Excel 2010
View 6 Replies View RelatedI'm trying to wrap my head around this. I have in a formula in one sheet pointing to a cell in another. Once I insert a row the formula adjusts. I need them to remain static.
I have tried searching, however I'm not 100% on the terminology.I have tried the F4 shortcut and put the $ signs in, however they still change.
I am trying to write formula in a cell using vba code, but i m not getting the expected one.
[Code]......
In the above code, i m trying to insert the formula where it fetches the address of a cell using some variables.
Here r = 1, c = 1 and resOffSet = 7
From the above code im expecting cell adress like A1 , B1 etc but i am seeing "0" in the cell value.
I have a certain range to start, and want to exclude rows if a defined cell is not greater than zero. I cannot figure out the syntax to achieve. The following code selects the range even if the single cell is NOT greater than 0...
View 5 Replies View RelatedI would like to change the name of all cells withen xrange with a text value greater than nothink.
View 4 Replies View Relatedis possible to have a cell's text color change if the value of the cell is greater than a certain amount. For example, if the cell is $200 or more the text would change to red.
View 3 Replies View RelatedI have these two subs in my thisworkbook module.
They do not want to work together.
Is there a way to incorporate the two of them?
T
he first 1 just checks to see if a cell is greater than 0 and colors the Tab green.
The first 1 is this:
Private Sub Workbook_SheetActivate(ByVal Sh As Object)
Dim ShArr As Variant
Dim RunMacro As Boolean
Dim sCounter As Integer
I am doing a spread sheet for to enter the times that i do in a rally.
So if i post a time of 00:49.3 and the target time is 03:54.3 i want the cell to turn red, or if the set time is less then the target time it should be green.
How can i do this in excel
I want the 2 graphs in "Graph" worksheet to change automatically when a row is inserted in "Data" worksheet . Every time i have to change the graph manually to contain the latest 20 days value. I want some offset or something which can be put in the range provided below to do the work.
Chart Data Range =Data!$A$1:$A$22,Data!$F$1:$F$2,Data!$L$1:$L$20
Legend entries (Series) - Series Name =Data!$F$1 ( this will remain constant everyday as this is a header field)
Series Values =Data!$F$2:$F$22 ( this should contain last 20 days range, for example if a next row is inserted tomorrow then it should automatically change to =Data!$F$3:$F$23)
Legend entries (Series) - Series Name =Data!$L$1 ( this will remain constant everyday as this is a header field)
Series Values =Data!$L$2:$L$22 ( this should contain last 20 days range, for example if a next row is inserted tomorrow then it should automatically change to =Data!$L$3:$L$23)
Horizontal (Category) axis series -Axis Label Range =Data!$A$2:$A$22 ( this should contain last 20 days range, for example if a next row is inserted tomorrow then it should automatically change to =Data!$A$3:$A$23)
Sheet attached : Devicess.xlsx
Is it possible to change the default text size on comments I insert throughout my spreadsheets? I have to enlarge 100% of them.
View 2 Replies View Related[URL] ........ I have 2 columns for cost (Column H and Column I). Please ignore the rest of the columns such as Amazon fees and shipping fees.
I already used VLOOKUP in my Item Cost column to gather product price based on product name (Column A).
However, I'd like to ask Excel for an IF function that will do the following:
After using VLOOKUP to find item cost, IF Drop Ship Cost (Column H) is greater than 0, I'd like Excel to change my Item Cost (Column I) to 0.
The reason behind this is because there are 2 places I get my inventory from:
1.) My warehouse. But if my warehouse runs out, I get it from
2.) Another reseller who will drop-ship for me
Therefore, I'd only be able to get my product from one place or the other, not both places.
I want to create a formula which will add 0.20 to the value of a cell if its greater then 0.
Basically i have a list of cells some of which will have a value and i want to sum this list and add 0.20 if there is a number in the cell.
I am trying to create a quoting system and basically its a list of rooms etc with the wall lengths and i am adding 0.20 to each wall to allow for excess but for example if there are no measurements in bedroom5 i dont want the 0.20 added.
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
[Code] .......
I have a formula in Sheet1 column H that I need to appear in the cells when the button is clicked (the button inserts a new row).
View 1 Replies View RelatedI have to make a table that shows that a if someone purchases
less than 5 items they receive no discount
5-10 items they receive 2% discount
11-20 items they receive 5% discount
21-50 items they receive 8% discount
over 50 items they receive 10%
and it has to be done in a way that the discount rate can be calculated using Vlookup I am struggling to find the best way to write this table. i tried numbering 1 to 50 and writing the corresponding discount rate in the second column but this looks untidy and can't calculate greater than 50 as i am not sure how to write it in the cell so it reads as >50 and not just 50.
Here attached is my sample workbook:
Attachment 310920
My button inserts a new row into the table.
What I want is that everytime a new blank row is created, the formula in the Days in Situ column is there as well (but obviously the cells update depending with which ever row it's in.. eg below formula is row 10.).
I have some columns with formulas in it. at the end of the column (used range) i have a row with total values of individual columns. However, Whenver, I insert a new line, then the formula of that particular column is not applied to the new rows inserted. does any one know why? If it is not set automatically, How do i enable it do be done?
View 9 Replies View RelatedIn my "example" I have references in Summary!D23:E32 which take data from Input!B36:U36. Is it possible to automatically update these formulae if a row is inserted eg above my row 37? The formula in D23 should then change from =OFFSET(B37,-1,0) to =OFFSET(B38,-1,0) and so on. I would like this to occur wherever I insert a row.
I am using this code, but it inserts rows consecutively from the top only.
Sub InsertVolRow()
Dim iRow As Long, iColumn As Long
On Error Goto Exit_Error
iRow = Application.WorksheetFunction.Match(" Total", Range("A:A"), 0)
Rows(iRow).Select
Selection.Insert Shift:=xlDown
iColumn = Application.WorksheetFunction.Match("Total", Range("2:2"), 0)
Cells(iRow - 1, 1).Select
Selection.AutoFill Destination:=Range(Cells(iRow - 1, 1), Cells(iRow, 1)),
I've applied a basic multiplication formula =D12*E12 in a table Column F, also I've filled it throughout but now if new rows are inserted in between or at the end of the table, new cells in this columns doesn't include this formula.
View 1 Replies View RelatedI send these kind of mails to intimate people about upcoming meeting, the format I prepare in Excel 2013 and paste it in Outlook 2013 (as a table, not as an image)
Now one of the columns I put as 'Days Remaining' which basically tells the users how many days are there to the review, the image below will show how it looks:
Now the numbers of days remaining will be correct the day I send the mail, but when somebody opens the mail at a later date, it would not sort of show the true number.
Is there a way to auto-update this number inside the Outlook mail, as it works in an Excel Sheet?
[URL]
I got the code in the above link working for me, but how would I restrict it to a certain subset of Rows? It's overwriting headers and totals and other things I don't want to change in the worksheet.
I'm trying to write a macro similar to the one found here: here:http://www.techonthenet.com/excel/macros/checkbox.php.
Rather then use a textbox, I would like the cell to display the date when text is inserted in the cell to the left.
ie. I insert text (the letter 'a') in cell E11, and the date appears in cell F11.
I would also like the macro to do this for a range of cells ie. for E11 to F21, then from G11 to H21, then from I11 to J21, all the way to column IV.
I have below formula.i need to change the cell address AK in the below formula on the value change in the A3.
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AK$6:$AK$3000)
For example if A3 is having value AZ i need the formula changed automatically as below
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AZ$6:$AZ$3000)
I wanted the title to be " Dynamic Row And Column Index In Macro" but I wasn't allowed to write it so. However, I have macros where I write things like:
.Cells(138, 13).Value = Something
Now, if I add rows and/or columns in the worksheet, (138, 13) might not be the coorect coordinates anymore.
I want to edit a cell's value without changing the formula the cell contains.
View 10 Replies View RelatedBasic run down of spreedsheet. 2 diffrent sheets formated like a calendar. sheet one is to track minutes tardy for employees at work. Work sheet 2 is to document any weather or other issue that might arive to cause and employee to be tardy.
I have condintional formating set up to change the cells a diffrent color (on sheet 1) if the same day is flagged on sheet 2 as a exceptionalable day. What i want -
When i flag a day as a weather issue or other exceptionalable issue on sheet 2 i place a inserted comment with an explantion. I want this comment to auto transfer to the corrisponding cell in sheet 1 when i place it on sheet 2. I'm not sure if this is possible with Excel 03 but thought i'd ask.
I am trying to create a filterable To-Do List. My goal is to enter each item with a userform, which I have created and pops up upon clicking the "Insert" textbox. making the following macros happen:
1) I would like to insert the new item in a row at top of existing info, below the headers, with the populated information from the userform when you click the "Add" Commandbutton on the Userform.
2) I want to make sure any filtering is reset whenever a new item is entered so the list reverts to original appearance.
Attached File : To Do List.xlsm
I'm trying to create a dynamic chart title by inserting a text box in the chart title that displays the value of the last populated cell in column A. The number of rows increases over time, so I'm trying to come up with a dynamic cell reference. When I hover over the text box a tool tip appears with this text "TextBox 2" so I assume that is the name of the text box. I'm definitely open to other methods that do not use vba. It seems that none of this code can activate the text box:
Code:
Sub textbox()
Worksheets("Figure3-5").TextBoxes("TextBox 2").Range("A" & Rows.Count).End(xlUp).Value
End Sub
[Code]....
Need automate a process that I would like to implement into my spreadsheet,
It involves inserting comments,
I want to be able to select a particular cell anywhere in my spreadsheet, and then click on a command button and have a comment automatically inserted into the active cell, I tried to record the macro by hand but I do not know how to state that it is the active cell the comment should be added to