How To Change A Calculated Cell To A Value
Sep 16, 2008
I am entering data for a month on one worksheet. The next month I change the date and reenter new data. I want another worksheet to record the data on a month to month basis, one month in one column, the other month in another column, to have year to date. Is there anyway to do this. Currently, I use an if statment =If(a1="January",b1), but I need to change these to values before I do the next month, and alter the formula to reflect the new month name)
View 11 Replies
ADVERTISEMENT
Jun 12, 2014
I need to see easily if my cell is giving a value by using a SUM. This is so I can see if the SUM has been taken off or overridden by typing in a number.
View 4 Replies
View Related
Jan 7, 2010
if its possible to place a value (the product of a formula) into a cell ie:
Cell A1 = "a"
Cell A2 = "b"
I would like to be able to say: If A1="a" and A2="b", then place "Yes" into D1.
I realize that =if(and(a1="a",a2="b"),"Yes",0)
placed in D1 would give the same result, but I do not want to have a formula in D1, I simply want the characters "Yes" placed in there.
View 3 Replies
View Related
Jan 27, 2010
I am trying to input data validation on a calculated field. The calculated field (sum of 10 fields above it) must not total over 100%. I have used the following in the data validation menu: Allow: whole number. Data: less than or equal to 1
This doesnt seem to be working when I input values of a total greater to 100 from its input cells however, it does return an error if I manually input a number over 100%, then it gives me an error message. Edit - sample sheet attached.
View 4 Replies
View Related
Nov 25, 2009
to copy the calculated value of a cell to another worksheet.
I tried =IF('Actual Hours'!D2="*"&"LR"&"*",'Actual Hours'!D2,"")
which when copied down would return values with LR in them, however D2 is a calculated cell (='RAS SENT 2'!L2) so it returns a blank, and I dont want to just reference this other cell instead.
Is there a way to return the value of a cell?
View 9 Replies
View Related
May 3, 2007
I am trying to blank out Column D if there are no furthercalculations required. As you can see now by the example that I have attached the formula continues the calculation.
View 2 Replies
View Related
Aug 10, 2009
I've been struggling with this for a little while today and quite can't seem to figure it out. I have a range --- A6:A28 --- where a user will enter a percentage. The total should add up to a 100%, which is in cell A30.
My understanding is that a need a worksheet_calculate function to tell users to revise their entries if the results in a cell A30 are either less than or more than 100%. This is the simple, non-working procedure I have now:
View 4 Replies
View Related
Mar 7, 2007
I've got a sample spreadsheet that I'm trying to get the MAX from a Range of cells that only begin with "TMP". Problem is, if I use MAX or SUM to try to calculate the largest number (or a sum, just to test), it returns "0" for the caluculated range. If I Copy and Paste Values, the MAX or SUM formulas still don't work.
Only if I edit the cell and hit the ENTER key will the Formula(s) work, for each cell in the range that I edit/ENTER. All cells are formatted the same (GENERAL), and I'm not working it into a VBA Macro (just yet).
View 4 Replies
View Related
Oct 25, 2009
I am having problem with getting a calculated cell to be blank if there is not data to be computed.
View 3 Replies
View Related
May 20, 2014
I've created a model starting from on another person's workbook, and I'm seeing an issue I haven't seen before.
For instance,
A1 = 10
A2 = 1.5
A3 = A1 * A2 = 15 (all good, so far)
If I change the number of A2 to 0 decimals places, the value shown will be 2 (which is correct, of course), but the value of A3 becomes 20. I would like for this to stay at 15 because the correct value of A2 is 1.5, not the rounded value of 2.
View 2 Replies
View Related
Jul 22, 2014
I have a filtered row that calculates values based on user input. I would like to take the calculated value of a cell in that row and place it as a static value in a different cell.
For example, the filtered row is row 85. The user inputs 5.5%. Cell AK85 calculates the value to be $100,000. Cell AK3 references the original row, which is 3. I would like to take the $100,000 value and place it in cell AK3 but as a static value and not based on a formula.
View 1 Replies
View Related
Jul 12, 2013
I have a calculated cell (D13) which can either be (All), Grade or Rate.
If D13 = (All), I would like Rows 19:52 to be hidden
If D13 = Grade, Only Rows 19:20 to be hidden
If D13 = Rate, Only Rows 22:52 to be hidden
View 2 Replies
View Related
Jan 10, 2014
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
View 3 Replies
View Related
Jul 21, 2009
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
View 9 Replies
View Related
Mar 25, 2013
I have below formula.i need to change the cell address AK in the below formula on the value change in the A3.
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AK$6:$AK$3000)
For example if A3 is having value AZ i need the formula changed automatically as below
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AZ$6:$AZ$3000)
View 4 Replies
View Related
Jun 3, 2008
I have a drop down sub pasted to worksheet:
Private Sub ComboBox1_Change()
ComboBox1.List = Array(100, 200, 300, 400)
If Range("I11").Value < Range("N11").Value Then
If Sheets("Profile").Range("K18").Value < ComboBox1.Value Then
Range("I11").Interior.ColorIndex = 2
Else
Range("I11").Interior.ColorIndex = 3
End If
End If
End Sub
I want it to change the cell color on drop down change. How can I modify things to have the change in drop down selection?
View 9 Replies
View Related
Sep 27, 2007
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub
View 2 Replies
View Related
Jun 6, 2013
What I need to calculate is:
If Quota 1 percentage => 90%, then Quota 2 percentage = sales / quota. If Quota 1 percentage < 90% then Quota 2 = sales / quota, with the maximum # being 200%.
If Quota 2 pecentage => 90%, then quota 1 percentage = sales / quota. If Quota 2 percentage < 90% then Quota 1 = sales /quota, with the maximum # being 200%
I was able to calculate this fine with one of the scenarios above, but not sure how to make it work with both at the same time.
Quota
Sales
Percentage
5000
4500
90%
Quota #1
7500
16000
213%
Quota #2
View 1 Replies
View Related
Jul 6, 2008
I have a pivot table with a calculated item. The problem is that it shows data for all rows EVEN when there is no data there. So the pivot table is a lot longer that it needs to be. How do I get the pivot table to show only rows with data in it? Also, all of the fields DO NOT have checks beside "Show Items With No Data".
View 9 Replies
View Related
Sep 19, 2007
I've written a custom function that calculates commissions (as a %) based on three variables.
I wanted to know what code I can use to cap the amount of commission paid out to a specific % amount. Something like "as soon as X exceeds 3 times the amount of Y, payout 3 times Y as the maximum".
View 4 Replies
View Related
Jul 21, 2012
I am trying to write a VBA macro that will mimic what i have already done in an excel worksheet i have made. The excel worksheet uses inputs for a heat exchanger and finds the temperature as it leaves the heat exchanger. This temperature is then the new input for the second line of the worksheet and it changes quite a few of the values in the sheet. I have the excel worksheet working where you just drage the row down and it does it automaticly, but i would like to have a VBA macro that all the values can be input in with the number of cycles until the heat exchanger equalizes out.
I am able to get the macro to work when it calculates just the first cycle, all the equations work my variables are ok for just one time. What i don't know how to do is make my program realize that it has to use the calculated temperature out of the heat exchanger as my new input for the heat exchanger. I know how to do it once so it is more of a syntax or understanding of a loop or an array for the values that are changing.
View 4 Replies
View Related
Nov 14, 2013
I have a column in powerpivot that has Products total amounts. Some of them are negative amounts but I want them to be positive. How would I write an IF statement for it? I want it to say " If Division amount column is a negative, then multiply by -1 but it is a positive , leave it as a positive" .
View 2 Replies
View Related
Jun 21, 2014
Take a look at the attached spreadsheet: Value_Lookup.xlsx
We have a pivot table with the "Product" on the Row context and a date ("FullDate") selected on the filter context.
The FactTable is related to the Calendar table by "FullDate" (which is marked as Date Column in Powerpivot)
In the Calendar Table, next to "FullDate" we have 2 more dates in the same row: "1 Month Back" and "1 Quarter Back".
We just need 2 calculated fields that return the "Price" value from the selected "Product" on the Calendar dates "1 Month Back" and "1 Quarter Back".
View 8 Replies
View Related
Aug 20, 2008
It is a few years since I worked in the IT industry and used EXCEL a lot.
I want to use (formula) SUM on a cell which 'sums' 3 other cells one of which has a the result of a formula but the result of that SUM is always 0 (zero). I am sure I can remember doing this in the past but cannot determine how it is done.
eg.
Cell Contents
C10 1000 (value)
C11 =A1*(A10/A20) (formula)
C12 2000 (value)
C13 =sum(C10:C12)
What do I need to do so that (cell) C13 results in the correct value instead of 0 (zero)
View 5 Replies
View Related
Nov 30, 2012
I have a list of figures (around 100 long) and I have a field which calculates a value somewhere within the range of the list (between the lowest and highest value in the list). I would like to round my calculated value UP to the closest value within the list.
For example
List : 1 3 5 7 8 9 11 13 15
Calculated value =9.4
Therefore the rounded up value I want to obtain is 11.
View 4 Replies
View Related
Dec 14, 2011
I have a pivot table that looks like this:
Code:
productname impressions cost CPM
product1 1,000,000 4523 4.7
product2 5,000 2400 48.45
product3 3,000,500 6,000 3
CPM is a calculated field that uses the formula =cost/(impressions/1000)
The problem is that the numbers in the CPM field are not, in practice, the results of that formula. They are averages (since it's a data field, I had to choose whether it was to be a sum, average, etc.). This means that, for example, the CPM 4.5 on the first row is not a calculation using the two numbers to its left. It is the average of the output of thousands of calculations done on the raw data, in which every line item with a productname of product1 had its CPM calculated, and then all those output CPMs were averaged together.
This is not what I want. I want a field that calculates based on what's already in the pivot table. So that the formula would be more like:
=(sum of cost)/(sum of impressions)/1000
View 2 Replies
View Related
Mar 4, 2012
I have a calculated field - if it is 0 I would like to now show the 0 - just a blank cell - can I do that?
View 1 Replies
View Related
Oct 12, 2012
I have created a macro to run different imports on the system and I need a message box calculated at the en displaying the message "Write Total Charges to Import: xxxx".
The total is the Sum of the cells listed on Column B. I have defined my total and need to show the message, and after the user has writen down the total and clicks OK, the cell showing the total is deleted. how to make it work?
The syntax I am using is:
Range("B" & EndRow + 2) = "=SUM(B2:B" & EndRow & ")"
MsgBox "Write Total Charges to Import: "
Range("B" & EndRow + 2).Select
Selection.Delete
The calculation to display is the result of (Range("B" & EndRow + 2) = "=SUM(B2:B" & EndRow & ")") but when I add the formula next to "Write Total Changes to Import" does not work.
View 2 Replies
View Related
Nov 22, 2013
#1
1
2
3
4
5
6
7
8
#2
Red
Yellow
Green
Blue
Violet
[Code] .....
I am trying to determine how many times a value occurs in each quartile in a data set, with the range of my quartiles changing for each row.
Above is a simplified sample of the data I am working with. What I would like to do is calculate the length of a quartile for each row, then determine whether "Red" is in the 1st, 2nd, 3rd, or 4th quartile
Right now I have two output tables. The first is a "Quartile" table, which for each row counts the number of values entered, divides by four, multiplies by the appropriate quartile and rounds down. For this I use the function
=rounddown(counta(range)/4*(quartile))
For Q1 in this dataset, that is =rounddown(counta($B2:$I2)/4*(1))
Then I have a table which calculates whether "Red" occurs in each quartile, with references to the cell values in my quartile table. My formula for Q1 here is
=countif(index(row#2,1,match(Q1 value,$row#1,0)):Index(row#2,1,match(Q1 value,$row#1,0)),"Red".
The actual formula (can be used if pasting table values into excel) is:
=countif(index($B2,$I2,1,match(Q1,$B$1:$I$1,0)):index($B2:$I2,1,match(Q1,$B$1:$I$1,0)),"Red")
Where Q1 equals my rounddown formula noted above, returning "1" in this case. For subsequent quartiles, I change my reference in the Match formula to start with the previous quartile +1, and end with the current quartile.
View 1 Replies
View Related
Mar 14, 2007
I need to insert 2 calculated rows in a data table for each state, one is Direct +2%, and Contractor +2%. Ideally, I would like to copy down the field name above. Every record in the table has the same 2 Categories (Direct & Contractor) and 2 calculations need to be applied. There are ~ 50,000 records so copy insert is not an option. Can a macro be applied to do this ?
Current
StateCategoryCount
New YorkDirect150
New YorkContractor75
BostonDirect200
BostonContractor125
Result
StateCategory Count
New YorkDirect 150
New YorkContractor 75
New YorkDirect +2%153
New YorkContractor +2%76.5
BostonDirect 200
BostonContractor 125
BostonDirect +2%204
BostonContractor +2%127.5
View 9 Replies
View Related
