Function To Copy Data From Worksheets To Another File
Mar 20, 2007
How do I create code that will copy and paste 30 rows of data
Copy from filename "Record1", worksheet name "CA3M", in column A and B, and Paste data in filename "Record2", worksheet name "CA3M"
- Column A 30 rows of data paste into A20:A49 of the new file and worksheet
- Column B 30 rows of data paste into E20:E49 of the new file and worksheet, prior to pasting these results remove all dashes "-" eg.0-0-1 = 001
The location of the 30 rows of data to be copied changes, so the code should always look for the following information in the row before and after the 30 rows to copy in column A and B:
- Find the 30 rows of data in Column A and B where the first row immediately follows the row with the cell result "Account Date" and the last row is immediately before the row with the cell result "Previous Page Page".
Also, I will probably have to update the code to repeat this function for several other worksheets within these 2 files after my database is completely built.
I am trying write code withVBA to save separate file in a different folder with Loop.
Write a code with "loop" till it finds empty cell in the column and for every change in number a separate file needs to be saved in specified folder with file name as "10010, 10011,10012... and so on with data copied in the file saved.
from an active workbook, I would like to open a new file "testfile" and copy two work sheets ("result1", "result2") into the new file and then close it and continue working in the active workbook. seems simple but i keep getting errors.
I have a file that opens a number of files from a source directory (which is identified by the User at run-time) & merges the source data into various worksheets (which all works fine)
Now what I'd like to be able to do is to be able to (silently) save multiple worksheets back to separate files in the original directory based on each worksheet name - e.g:
"Sheet1" and "Control" Sheet" are saved to SourceDirectorySheet1.xlsm "Sheet2" and "Control" Sheet" are saved to SourceDirectorySheet2.xlsm "Sheet3" and "Control" Sheet" are saved to SourceDirectorySheet3.xlsm ... "Sheetn" and "Control" Sheet" are saved to SourceDirectorySheetn.xlsm
(Note that "Control Sheet" also contains Command Buttons & VBA which I'd like to preserve)
I have a base excel file for summarizing some data, the problem is that the data comes from a different excel spreadsheet. What I want to do is make a function that pulls the data from another spreadsheet into my base file. It would be easy if it were just one excel sheet, but this job would require where the data is pulled from a data file which has many modified versions.
Can anyone tell me how to do this? The files with the data will be structured the exact same but with different data entered in. I just want a button so I can click the file I want the data from and have it show up on my summarizing base file.
I have a workbook that contains worksheets. They are listed as follows:
Sheet 1ABCDEFG
In cells A1 - A49 I have text. What I would like to do is to have a macro that I can run that will basically copy and save new workbooks with sheets A - G copied over and have the new workbook saved with the file name that I have denoted in cells A1 - A49 on Sheet 1. Also, the macro would ask me where I want to save the new Workbooks.
For example, if this were Sheet 1, Column A then the cells below would be the saved name of the new workbooks and the new workbooks would have Sheets A - G in themRed
Blue
Purple
Black
White
Yellow
Orange
Green
Gray
Brown
One more piece of information, the file that is being copied and saved is large (~80MB). If there is a macro that would allow me to simply "save as' the workbook and the Saved Workbooks would be named using the data in Sheet 1, that would work as well in case copying, pasting, then saving may take more time
This is a sample of the data with which I am working. I know that a macro can do what I need, but I am only versed in Excel formulas and not that much programming. I need to be able to first sort the data by Column C ("Element Type"), then by Columns E, F, G ("Year", "Month", "Day"). Then, I need to be able to copy all rows that have the same "Element Type" and "Year" to a new file, using the same header from the original spreadsheet on each new spreadsheet - doing this multiple times until the end of the file is reached.
Ideally, the new files would have a strict naming convention: XXXXXX-ZZZZ (YYYY).xls, where the X's are the value of the "COOP Station ID" in Column A, the Z's are the "Element Type" from Column C, and the Y's are the "Year" from Column E. If this theoretical macro were run with the Sample Data file I provided, it should result in the creation of five new workbooks. Is there a way to write a macro to do this, or at least something similar
I have csv files auto generated (with date stamp in name) and saved in a specific folder everyday. I need to find a macro that will copy the row(s) every day and add to the next empty row in the master excel file. Some days the csv file may have a single row of data and on some other days it may have multiple rows of data to copy and paste.
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
I have an excel file with few worksheets. From the 2nd to the 22nd the structure of the worksheets is the same. For each of them I have to add the same column of data. How do i do this?
I have an excel file with multiple worksheets that contain data that needs to be collated
There are a # of different product #s on all spreadsheets I need a total qty for each product # by calculating the qty of each style # (ie how many I1 across all sheets?)
Most excel/vba books say not to use the sumif function. I have a very large workbook (9meg) and cant use VBA code as it slows down the interation calculations required. I have used the sumif function to find and collate unqiue data on different worksheets. Is there another function that i should be using?
Is there an easy way to automatically copy data from 1 Excel spreadsheet to another when the data is slightly out of order? Currently an admin copies and pastes from file 1 to file 2 manually. There are approximately 800 names to copy. It would be ideal to type a command or press a key and have file 2 updated automatically. Is there a feasible way to accomplish this without spending a lot of money or time?
file 1 file 2
john 100 john 100 june 200 lance 50 marie 150 june 75 stan 100 marie 125 phone 50 stan 200 hold 25
In the example above, if lance doesn't appear in file 1 his amount doesn't get copied and his 50 remains the same. The amounts do not get added, just pasted over from file 1 to file 2 with the days sales results. Only the names on file 2 get pasted over. Phone and hold amounts in file 1 are ignored.
I need to copy data from two ore more worksheets with specified name in a column.
Input data: -name of the worksheets to be copied in column "H" from sheet "final" -diferent number in the worksheets in column "F" and "G"
Outpt data: -I need to copy data from some worksheets(column F and G) in "final" worksheet (column A and B). But I need to copy data only from the worksheets with the name in column "H" of "final" worsksheet.
I am trying to work out how to copy all data from worksheets that begin with the name 'Sheet' and paste that information onto the next available blank cell in a workbook called 'Results'. I have found how to copy information from all worksheets to 'Results' but not from selected worksheets that begin with the name 'Sheet'.
I run a report each month and I have several hundred lines of data with Heading 1 being the customer Name. I would love to copy this information to individual sheets based on the customer name as showed below (Output).
I need a macro to copy data to various worksheets, in sheet workings, header is row 5, i have list of a/c codes in Col A, i need the macro to do autofilter col a5, and do a custom filter that begins with the following criterias, i then need the macro to copy filtered data to various worksheets, each worksheet is in the order of criteria, so CITI will be copied to CITIBANK_INTERNATIONAL etc. Target range to copy data to various sheets is A7
I have a workbook with 3 sheets. AP, Move, Match. AP & Move will be about 40,000 lines.
I need a macro that will take the data from those two sheets and match them up on the match sheet by column A Line by line with all data moving over. An example is attached.
I'm not sure if this is possible, but please let me know if you need more info because I really don't want to do this manually. Anything that doesn't match I just need a blank line. I can add the true-false formula, but if it would fit in the macro that would be cool to.
I'd like to be able to have a macro that will create a pivot table based on a range, open up each of the total rows within the pivot table (which will create a new sheet), name the worksheet the title of the total row corresponding to it then copy each worksheet created by the pivot and paste into another sheet in a required format.
I have an issue to where I have my worksheet entitled "Index Data" as my output. I need to loop multiple worksheets to copy cell D2 and copy onto worksheet "Index Data" in column B.
It should look similarly to this:
VB:
Sub Range("D2").Value = myinput1 For Each ws In Worksheets [relevant code] Next ws End Sub
I need a macro to copy data from "sheet1" "sheet2" "sheet3" / column E and F to the worksheet "final". The number of rows in "sheet1", "sheet2", "sheet3" etc. is variable.
how to copy data from two different tabs and then paste it into one? My below code opens up a workbook and extracts the appropriate data, but I also need it to extract data from another tab within the workbook that was opened.
Sub LTDexportDATA() Application.ScreenUpdating = False Application.DisplayAlerts = False
I have a workbook with 26 multiple worksheets that each represent 1 of 26 payperiods per year (bi-weekly payperiods). These worksheets consists of rows of employees names and hours worked each day. The columns consist of dates representing each day in that payperiod.
I need to be able to search all the worksheets (ie. search all 26 payperiods) to find specific 30 day intervals and then copy each employees hours worked to a master spreadsheet. I have tried variations of Index & Match formulae as well as vlookup/hlookup/ISNA without luck. I am not able to use VBA.
I am trying to filter the data in my fortnightly timesheets based on each job code (of which there are multiple)to a new sheet. I have found code on the net which should be doing this but it keeps falling over on the following line:
The error i am getting is: "Run-time error 1004:". Autofilter method of range class failed. The code has already taken out the unique values from my master sheet and copied the list to a new worksheet. It should then use this list as the criteria to filter the master sheet. I have spent hours looking at other web pages for an answer to this particular error but none are using a variable criteria like i am.
I have to write a macro that will copy the values of 'Items' in 'worksheet 2' to 'Items' in 'worksheet 1' ONLY when the 'Title' value is matching in both worksheets AND the value of ' Heading' in worksheet 2 is 'Entry1'.
Example:
Worksheet 1:
Title |Items
David Bill John
Worksheet 2:
Title |Items |Heading
David |A, B, C |Entry1 David |A, B |Entry2 Bill |A, B, C |Entry1 Bill |A, B, D |Entry2 John |G, H, J |Entry1 Gerry |G, H, R |Entry1
From the above data, I want the macro to compare 'Worksheet 1' with 'Worksheet 2' and only copy the 'Items' that have a matching 'Title' AND a 'Heading 1' value of 'Entry1'
So the final result should be:
Worksheet 1:
Title |Items
David |A, B, C Bill |A, B, C John |G, H, J
I have seen examples of compare used but not sure how to apply it to my case.