I am trying to hyperlink all Worksheet2 A cells to worksheet1 A cells according to their row number. I have tried to create a Hyperlink in A1 and drag it down but what happens is that hyperlink links to same cell adn doesnt change cell number whilst dragging.
View 4 RepliesIn my workbook I have several worksheets. In worksheet1 I can plot in new users, like
View 11 Replies View RelatedI have an excel workbook with 2 worksheets. One worksheet shows the MASTER LIST of COMPLETE Customer Names (e.g. ABB Supplies Incorporated). The other worksheet has information on customers but the customer names typed in are incomplete (e.g. ABC Supplies). I need a macro that would look do a comparison of the customer names in the 2nd worksheet to the Master List worksheet and pull the data (complete name, address, etc.) for those that would match (partial match since company name is 2nd worksheet is usually incomplete).
View 2 Replies View RelatedI have a excel worksheet (2000 format generated by java excel api)that needs to hyperlink roughly 120,000 cells. After hyperlinking exactly 65534 cells, the remaining cells are just underlined blue text w/o hyperlinks. Even when it's saved as Excel 2007 worksheet, I was unable to add anymore hyperlinks manually.
I don't know if there is a way to make it work?
There are 30,970 rows and 11 columns in the sheet.
Is there any solution that does not involve spliting sheet, greatly increasing # of columns, or greatly increasing # of rows.
i have been working on 2 sheets receiving and selling item and QTY, or in other words i have a Stock IN sheet and a Stock Out sheet
is there some sort of a formula which links 2 cells, columns, together in a way that, if one cell's number increased the other would decrease automatically ?
say iv set 50 in cell a1, i want to set 10 elsewhere and the 50 in cell a1 will automatically decrease from to 40
here's my excel worksheets i uploaded it,
I have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
View 2 Replies View RelatedI have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies View RelatedAny way to make it so that a cell can remain locked but be able to click a hyperlink? I need the cell to remained locked so nobody can alter the hyperlink name and value but I would like users to be able to click it and have it open in their browser.
View 9 Replies View Relatedhow I would do the following, as I have been having a play but not managed to get anything.
I have two cells, C10 and C11, they both contain numbers. I want to create a hyper link that goes to the sheet called: Semester C11 Year C10
e.g. if the cell values are 2 and 1 respectively, I want the link to go to the sheet called 'Semester 1 Year 2'
I've been trying to create a hyperlink to another worksheet in the same workbook using cell("filename") to extract the filepath because the filename could change or the file could be moved. I use
=LEFT(CELL("filename",A1),FIND("[",CELL("filename",A1),1)-1)&MID(CELL("filename"),SEARCH("[",CELL("filename"))+1, SEARCH("]",CELL("filename"))-SEARCH("[",CELL("filename"))-1)
to extract the file path, and then try to throw it into the hyperlink formula like:
=HYPERLINK("[&G1&]'Sheet2'!A2","Go to link")
where G1 is the cell where the filepath is stored.
I'm not sure if my syntax or something is wrong but it's not working out.
I am also looking to use vlookup or somethign in the hyperlink formula to match the cells in column A of sheet1 to column B of sheet2 so I can hyperlink it to the same number on sheet2. Right now in the example below it is all linked to go to A2 on sheet2, and dragging the formula down doesnt change it to A3,A4 etc.
I would like to copy a large selection of hyperlniks down a column of 200 plus cells and would the hyperlink to increment as I drag the cells downwards.
Is there a simple way to copy and paste down a large selection of cells, so that I do not have to edit each hyperlink individually
Have enclosed example.
I need to create a way to generate specific URLs based on a fixed URL and adding a variable number in a cell to create that URL.
example of the finished product
[URL]
So I have:
Cell B is http://www.boxpool.com/=
Cell D is 99
What formula should i use to generate [URL] so that different numbers can be used to generate unique URLs.
I have a protected worksheet with about a dozen unprotected cells (so the user can just answer question from a validated list). Also unprotected is a hyperlink back to the main menu (Sheet1).
My problem is when a user clicks outside of where they should (i.e. on a protected cell) - it executes the hyperlink back to Sheet1.
I have tried unprotecting cells around the hyperlink. I even tried putting "dummy" hyperlinks around the main one referring it back to the same sheet.
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I have a similar question regarding coloring of empty cells between two cells with specific numbers as posted in below thread : [URL] .....
This is exactly what I want. But here I have some problem with formula.
=COUNTIF(A1:Z1,1)=1
Above formula could pick cell value 1 and color the empty cells in a row between the cells having value=1. But if I want to use the same formatting for other numbers like 2 or 3 it doesn't work.
For example in row(A1:Z1) I have A1=1, D1=1, and F1=2, K1=2, and O1=3, U1=3
I required multiple conditional formatting that could color the cells based on values first from A to D then from F to K and finally from O to U.
I'm using above formatting it works with cells having values 1 but its not working for 2, 3 or any other cells values.
I have already tried replacing 1 in above formula with 2 and 3 but it doesn't work.
In my financial modelling I often have a calculated number of months of inventory. This number varies. I need to use this number to calculate the actual inventory value. For eg. it may be 3.2 months of inventory; in this case I need to sum 3 cells (current month, current month -1, current month -2) plus 0.2 of the fourth cell (current month -3)
But I may need to change the number of months of inventory to, for example, 4.2. In this case I would need the sum of four cells plus 0.2 of the fifth cell etc etc.
Getting a formula or macro that count the number of blank cells between 2 cells with data (numbers) in 1 column. E.g.
1
Blank
Blank
2
Blank
Blank
Blank
3
...
In this case the blanks between 1 and 2, between 2 and 3 to be displayed in an adjacent column.
How do you make an active-cells value / text a hyperlink?
View 1 Replies View RelatedThe purpose of this endeavour is to create a cell that when the user clicks
on it, it will open up a Word file that THAT particular cell represents.
FIRST STEP:
Take the values from Column D (Tract Number), then add a ".doc" extension to
it, then put the UNC filepath (\serverdata
eports) in front of all of that
and put it in Column E. See me example below:
File path plus Tract Number plus Extension
\serverdata
eports 7-5-065-085 .doc
.... to generate something like this:
\serverdata
eports7-5-065-085.doc
SECOND STEP:
Use the value (only when the user clicks on the hyperlink) from the cell in
Column E and start up Word.
I am attempting to create a user friendly spreadsheet and i am getting no where. i want to have someone populating a spreadsheet with data with a conclusion and final. at the end of the range if the outcome is below a set percentage they will click the hyperlink which will open outlook to a preset distribution list depending on the percentage. i have all this done but what i need is that when the email opens it copies the range of cells into the email so that all they have to do is click send. this seems simple enough to say but it appears that Ms has decided this is not possible.
View 1 Replies View RelatedI need vba code to flash the destination cells when hyperlink is clicked.......
View 3 Replies View RelatedI want the macro to:
1. Create a new worksheet when data is entered into a cell (ie. entered text "ACC2013" into cell A5)
2. Rename that worksheet to correspond to the data in the cell (ie. change worksheet name from sheet2 to "ACC2013")
3. Create a hyperlink between cell A5 and sheet2
I'd like for this macro to loop through a range of cells so I don't have to have a long code. Let's say my data range is from A5:A23. If this requires multiple macros that is fine.
creating this code or fomatting in my excel file. I want to fill color in cells between the two cells that has value of say "1" or anything in it. There will be only 2 numbers at any time in any row that has the value in it. All other cells will have value of "0" or can be changed to empty cells. So, the formula should check from say range "A3 to Z3" in row and for example it gets the first numbered cell in C3 then it start filling color from C3 cell until it reaches the other cell in that range that has the number in it. Say the row "A3 to Z3" has 1 number in C3 and other in cell H3 then it should fill color between this two cells from C3,D3,E3,F3,G3 and H3.
View 7 Replies View RelatedI have a column with Cells that will sat True or False, the amount of rows will be different every time, I need to work out what the total percentage of True cells compared to the total number of cells. How would this be achieved.
View 9 Replies View RelatedText to Number or General.xlsx
The included, small database is formatted as text. It is a text feed from an outside source. I simply want to format the cells into either numbers or general format but not text... seems simple, and it should be, but the only way I can get this done is to go to each cell and access the formula bar and re-enter the number by pressing Enter.
Create some sort of formula combination or macro that will: Recognise a cell with a value of 1, 2 or 3 in. If 3 is in the cell, the cell to its left will be counted and added to a total. If the cell that has 3 in changes the value is removed from the total. Ive tried lots of methods but i cant figure this one out!
View 6 Replies View RelatedI have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
I would like to get number of cells since the cell value exceeded a given number in a given range of numbers.
example
cell address cell value
a1 1
a2 1.9
a3 -1.2
a4 4
a5 3
I would like to know number of cells since value was less than 1 : the answer is 3 (a5,a4,a3)
Number of cells since number has exceeded 3: the answer is 2 cells back ie a5,a4
how do you place 100/0 so the /0 stays static and the 100 can be used to operate? (ie: 100/00, 101/00, etc)
View 5 Replies View Related