If Statement Highlight The Entire Row
Oct 8, 2009I want to see If A1 contains 0 or any number, and B1 or C1 has number greater than 1 it should highlight the entire row.
View 9 Replies
ADVERTISEMENT
Highlight An Entire Row And Then Run A Macro
May 16, 2009Here's what i am trying to do... I have a workbook with lots of info, i believe there is a way to highlight an entire row and then run a macro that will then collect the info from certain columns (along the specific highlighted row) say, columns A-F and M & P for one example, the collected data will then be copied to a new pre-designed template, and pasted into set cells. The cells that the data will be pasted into will not be along one row though, the pre-defined template will resemble say, an application form Can this be done, I understand macros only at a basic level currently but am trying to understand the VBA way of creating them too now.
View 9 Replies View RelatedHighlight Entire Row When Word Is In Cell
May 12, 2009What I want to do is select all rows that contain the word conveyor in it. So far I have managed to select all the cells, I have also managed to select the entire row but one row at a time, I have even been able to turn all the cells a different color but I just want to highlight them for other formatting, copying, and several other things that need to be done. I have other documents this could be very useful in too so i want to make it a generic multi-line highlight rather than adding the formatting into the formula.
View 9 Replies View RelatedHighlight Entire Row If Values Are In 2 Columns?
Feb 3, 2014I am wanting a Macro or a VBA to look at all of my rows and completely highlight the row after 2 text values are found.
Example: Range A3: P:28, Find in Row A3:P3 that has "Text1" and "Text2"
Highlight Entire Row Based On Cell Value
Aug 13, 2009From what I understand this is a simple process but since I am new to programming and I am in need of help. I am trying to write into one of my macros that as it is searching in the sheet if it finds CRL in column C and if it finds a value between -1 and 100,000 in column K, then it will highlight the entire row green.What can I do to add this into my macro?
View 14 Replies View RelatedHow To Highlight Entire Row When Selecting A Cell
Feb 23, 2013Is there a way to highlight and entire row automatically every time we select a cell on that same row?
I have 20 columns of data and it's a mess when when need to scroll to the left or right since I lose sight of the selected cell and then I can't see which the row I want to check.
Highlight Entire Row Base On A Single Cell Value
Feb 12, 2010i have it to where is highlighting a single cell i will like the macro to highlight entire row base on a single cell value.
View 2 Replies View RelatedConditional Formatting In Order To Highlight Entire Row?
Feb 25, 2012in order to perform conditional formatting for entire row, if one condition satisfy for particular Cell then entire row should get highlighted.
View 5 Replies View RelatedHighlight Entire Row When Any Cell In 1 Column Contains Specific Value
Aug 24, 2008Code that will highlight a entire row when a cell from a column has a value of 0. It will check all the cell from Column C1:C100 and check all the cells that contains a 0 value. Need to highlight the entire row that contains this cell value and fill it in orange color.
View 9 Replies View RelatedTie IF Statement To Entire Column
Jul 17, 2013The subject summarizes what I want to achieve. I just want to tie an if statement to an entire column, so it will disappear if a statement is satisfied.
View 4 Replies View RelatedHighlight Entire Rows In VBA Based On Entry In Column A
May 29, 2012I am trying to write a procedure to highlight entire rows in VBA based on a entry in column A.
I have the below which works for say 1000 rows but breaksdown when I have 58,000 rows which is the usual amount of data I will have.
Below is the code I have so far. It appears when I debug it breaks on the red line with type mismatch.
Option Explicit
Sub RemoveBH()
Application.ScreenUpdating = False
Dim intcount As Long
For intcount = Cells(1, 1).CurrentRegion.Rows.Count To 1 Step -1
[code].....
Highlight Entire Row Of Data If Text In Column Begins With ABC
Aug 7, 2012I want to highlight an entire row of data if the text in column A begins with "ABC". I can't seem to get the conditional formatting formula correct. My data goes from column A to column O.
View 3 Replies View RelatedHighlight An Entire Column Based On A Cell Date.
Jun 9, 2009I want to highlight an entire column based on whether a cell in that column is equal to today's date.
I know how to write a loop that cycles through all of the columns until it finds today's date and then modify the column's properties, I was wondering if there was an easier way to do it. Also, I want the highlighting to be temporary meaning it should not save.
Deleting Entire Column - Statement Ignored
Apr 11, 2012Working on some code that will find the Column Name "CL" and delete the entire column. Here is what I have so far...it does not give me a error when it compiles, but for some reason the statement in red is being ignored. I tried switching Range with Columns, but that did not work.
Private sub coldelete ()
Dim Rng2 as Range
shUCLR = sheets("Unit Cost").usedrange.rows.count
Set Rng2 = Sheets("Unit Cost").Range("A1:BF1")
For Each d In Rng2
If d = "CL" Then
colnum = d.Column
colletter = Left(Sheets("Unit Cost").Cells(1, colnum).Address(False, False), (colnum)
IF Statement To Highlight A Row
Jan 30, 2007I have a spreadsheet set up for recording a business's reply times and what i want to happen is if say for example the cell M4 was greater than the cell K4 i want that whole row to be highlighted red.
Excel 2010 :: Highlight Entire Record Based On Value Of Single Cell?
Apr 10, 2013MS Excel 2010, WinsXP
how to highlight an entire record based on the value of a single cell?
I would like to highlight all records grey where cells in a column = "closed".
Excel 2010 :: Pivot Table Conditional Formatting - Highlight ENTIRE Row
Aug 16, 2013I am using Excel 2010. I have a pivot table where I want to highlight the ENTIRE row where a certain cell value equals something.
In essence I want all the Material Subtotal Rows highlighted "Orange" But as you can tell from the picture below I am having issues with the Body of the Pivot table. I have the formula checking to find whenever it finds the word total to highlight it.
The example below is showing how I need the row to be formatted. I can get the Data (Units) section formatted no problem. It is just the other part of the pivot table that I cannot format.
For the columns from Material to SAP # I have been trying to use Dynamic Name ranges using the Offset function. However, excel turns that Name range to a range and if I filter the pivot table, it adds extra ranges to the Applies to box and starts to really mess it up.
If Statement To Highlight Cell Once Data Is Inputed
May 15, 2009i am going to be making other columns with data. i want it to highlight the cell from the new columns if the value is higher than the standard.
not quite sure how to do this? do i make an if statement and put it in the cell, then go and input my data over it?
Highlight Entire Row When Cell Selected Without Losing Original Formats And Color Of Original Row
Sep 5, 2012The problem is when I highlight a row with some color the original color of the row is gone, so I tried this code, and again, it's removing the original format and color for the row This is the code from McGimpsey & Associates : Excel : Highlight row with background colors
Code:
PrivateSub Worksheet_SelectionChange(ByVal Target As Excel.Range)
Const cnNUMCOLS AsLong=256
Const cnHIGHLIGHTCOLOR AsLong=36'default lt. yellow
Static rOld As Range
Static nColorIndices(1To cnNUMCOLS)AsLong
Dim i AsLong
IfNot rOld IsNothingThen'Restore color indices
[code].....
How can I retain the range's historical color so that when I deselect the row it reverts properly?
Catch An Error And Reset The Entire Code To The Very Beginning And Skip That Entire Entry
Jun 5, 2008I want to catch an error and reset the entire code to the very beginning and skip that entire entry. When I use "Next fieldSheetName" I get "Next without For," error 1004. Searches tell me I have an open block somewhere, but that's not true. Removing that statement (and having the loop iterate as normal) has no error at all.
Dim employeeName As String
Dim fieldMax, x, y As Byte ' Counters mostly
Dim workedHours, fieldSheetName As Integer
fieldMax = 204 ' Row number to stop on in the field time sheet
row = 4 ' Row specification for field time sheet. Begin at row 4 to ignore headers
' and start on the first name. This should not be changed!
Col = 3 ' Start at column 3 then increase by one to start going to next time entry
' RESET HERE!
For fieldSheetName = 4 To fieldMax Step 8 ' This is our MAIN loop. It iterates from 0 to fieldMax, which is 204...........
Autofill Entire Row With Data From Above Over Entire Spreadsheet
Jul 28, 2014I'm trying to autofill a series of rows (that are blank) with data from an above row. I want to autofill the row in its entirety, not just filling in blank cells.
For instance (assuming comma is a new column). Colors listed are just a data example. Space between commas indicates a blank cell:
142, RED, GREEN, , YELLOW, , BLACK, PURPLE
(blank row)
142, GREEN, RED, ,BLACK, , PINK, ,
(blank row)
(blank row)
(blank row)
154, YELLOW, BLACK, , GRAY, , PURPLE, RED
(blank row)
(blank row)
So rather than it just completing the task in one desired cell, it would complete the task over the entire spreadsheet. Data spread can be as far as row 500 and column BY, so you can see how a copy + paste or a drag would get monotonous.
Another small example data set:
1,1,1453,0,10,-35
(blank row)
(blank row)
0,0,1448,0, ,-35
(blank row)
1, ,1443,1,3,-36
1,2,1408,2,7, ,
(blank row)
(blank row)
(blank row)
1,2, ,2,7,-39
(blank row)
(blank row)
1,3,1344,1,10,31
And column A will always have data (unless the row is completely blank.
Utilize A Select Case Statement In Target Intersect Statement
Jul 28, 2009I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
If Statement Within If Statement (recognize The Cell)
Oct 1, 2008I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedExcel 2010 :: Use One Set Statement To Set Second Statement?
Feb 14, 2012I am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
ADODB SQL Statement ORDER BY Statement
May 5, 2014I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
Switch Statement Is Too Long For VBA. To Make The Switch Statement Work Over Two Lines
Jan 6, 2009I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
IF Statement - Minus One Statement From The Other?
Mar 18, 2014I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
If-statement Inside An If-statement
Jun 13, 2009If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?
IF Statement, MAX Statement, And Return A Value
Apr 25, 2007Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e.
Column A --- Column B ---- Column C
AB ------------ 0:02:22 ----- 04/14/2007
CW ----------- 0:03:13 ----- 04/16/2007
CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".
If Statement Contained Into A Sum Statement
Jul 3, 2007I have a problem with a formula inserted with control+shift+enter
The formula is
MEAN(IF(' VALIDATION'!$G$2:$G$59999=D30;'VALIDATION'!$E$2:$E$59999))
In the Validation sheet I have the column G with values 0 and 1, and another column E with numeric values.
Changing the value of cell D30, the formula will calculate the mean of the values in column E that have a value equal to D30 in column G.
The problem is that this function works when D30=1 and not when d30=0, in this case the formula returns N/D.
I have tried using also text values instead of 1 and the formula works . The problem is only when D30 is 0