Is there a way to highlight and entire row automatically every time we select a cell on that same row?
I have 20 columns of data and it's a mess when when need to scroll to the left or right since I lose sight of the selected cell and then I can't see which the row I want to check.
I have a large set of data regarding the activities going on in particular rooms. The data contains activity name, start time, day, duration, room and size.
I would like to select all rows that contain a cell in the activity name column which contain the words 'VideoConference'.
I have tried to Search, Select All then index the remaining data using =iferror(index(etc. However some activities occur in more than one room and all variables apart from 'Room' are the same. Thus when I have tried to index the room column I get the same room for both rows.
ps the raw data set consists of +28000 rows so I can not simply look through and copy.
What I want to do is select all rows that contain the word conveyor in it. So far I have managed to select all the cells, I have also managed to select the entire row but one row at a time, I have even been able to turn all the cells a different color but I just want to highlight them for other formatting, copying, and several other things that need to be done. I have other documents this could be very useful in too so i want to make it a generic multi-line highlight rather than adding the formatting into the formula.
View 9 Replies View RelatedFrom what I understand this is a simple process but since I am new to programming and I am in need of help. I am trying to write into one of my macros that as it is searching in the sheet if it finds CRL in column C and if it finds a value between -1 and 100,000 in column K, then it will highlight the entire row green.What can I do to add this into my macro?
View 14 Replies View Relatedi have it to where is highlighting a single cell i will like the macro to highlight entire row base on a single cell value.
View 2 Replies View RelatedCode that will highlight a entire row when a cell from a column has a value of 0. It will check all the cell from Column C1:C100 and check all the cells that contains a 0 value. Need to highlight the entire row that contains this cell value and fill it in orange color.
View 9 Replies View RelatedI want to highlight an entire column based on whether a cell in that column is equal to today's date.
I know how to write a loop that cycles through all of the columns until it finds today's date and then modify the column's properties, I was wondering if there was an easier way to do it. Also, I want the highlighting to be temporary meaning it should not save.
How can I change the font color or highlight cell A1, when I select cell A2. Cell A2 is still blank, no value entered yet. I also would like cell A1 to return to original font color or no hightlight when cell A2 is no longer selected (active), whether a value is entered or not in cell A2. Let me clearify, (A1 thru N1) and (A3 thru N3) have diferent dates and the font color is white, as is the cell too. Therefor you can not see the dates in (A1 thru N1) or (A3 thru N3).
However, when any cell (A2 thru N2) or (A4 thru N4) is selected (example A4), the cell above it (cell A3) changes font color or highlights, so the date can be seen in (A3). But when cell (A4) is no longer selected the above cell (A3) hides the date (changes back to white font on white cell). Data or a value is not necessarily entered into (A4) for (A3) to change. (A4) is only selected to show the date in (A3). But if data or value is entered into (A4), the date in (A3) will still be seen until (A4) is no longer selected/active.
MS Excel 2010, WinsXP
how to highlight an entire record based on the value of a single cell?
I would like to highlight all records grey where cells in a column = "closed".
The problem is when I highlight a row with some color the original color of the row is gone, so I tried this code, and again, it's removing the original format and color for the row This is the code from McGimpsey & Associates : Excel : Highlight row with background colors
Code:
PrivateSub Worksheet_SelectionChange(ByVal Target As Excel.Range)
Const cnNUMCOLS AsLong=256
Const cnHIGHLIGHTCOLOR AsLong=36'default lt. yellow
Static rOld As Range
Static nColorIndices(1To cnNUMCOLS)AsLong
Dim i AsLong
IfNot rOld IsNothingThen'Restore color indices
[code].....
How can I retain the range's historical color so that when I deselect the row it reverts properly?
I want to stop the user selecting an entire row by clicking on the row header.
How can I do this?
Here's what i am trying to do... I have a workbook with lots of info, i believe there is a way to highlight an entire row and then run a macro that will then collect the info from certain columns (along the specific highlighted row) say, columns A-F and M & P for one example, the collected data will then be copied to a new pre-designed template, and pasted into set cells. The cells that the data will be pasted into will not be along one row though, the pre-defined template will resemble say, an application form Can this be done, I understand macros only at a basic level currently but am trying to understand the VBA way of creating them too now.
View 9 Replies View RelatedI want to see If A1 contains 0 or any number, and B1 or C1 has number greater than 1 it should highlight the entire row.
View 9 Replies View RelatedI have Columns A to C which are hidden. I have tried to unhide these bey selecting the entire worksheet but to no avail. I am using Office 2010.
View 4 Replies View RelatedI am wanting a Macro or a VBA to look at all of my rows and completely highlight the row after 2 text values are found.
Example: Range A3: P:28, Find in Row A3:P3 that has "Text1" and "Text2"
I have an excel sheet where I would like a user to enter a start date and end date(say Feb 1, 2013 to Feb 28,2013). And these dates will be able to change to whatever month the user wishes to look up in a specific date range(column A has 365+ dates). This post is closely related to [URL]... but I cannot figure out how to get it to work from my case.
So working off the same worksheet, I have the beginning date in AC35 and the end date in AC36 in which the user enters. I would like the dates that fall in this entire month, including the beginning and ending dates to be referenced when looking for the specific day that contains a value I have in S35.
In other words, I have data in columns A through N. The dates are in column A and S35 is a value obtained from using Max(L185:L526) where L185:L185 is manually selected each time I want a different month. I don't want this to be a manual process of scrolling down the spreadsheet to get the next month.
in order to perform conditional formatting for entire row, if one condition satisfy for particular Cell then entire row should get highlighted.
View 5 Replies View RelatedI am trying to write a procedure to highlight entire rows in VBA based on a entry in column A.
I have the below which works for say 1000 rows but breaksdown when I have 58,000 rows which is the usual amount of data I will have.
Below is the code I have so far. It appears when I debug it breaks on the red line with type mismatch.
Option Explicit
Sub RemoveBH()
Application.ScreenUpdating = False
Dim intcount As Long
For intcount = Cells(1, 1).CurrentRegion.Rows.Count To 1 Step -1
[code].....
I want to highlight an entire row of data if the text in column A begins with "ABC". I can't seem to get the conditional formatting formula correct. My data goes from column A to column O.
View 3 Replies View RelatedI'm new to Excel 2007... whilst I'm managing to find most things I'm used to using in 2003, I have an issue in one workbook that I can't figure out.
When I click in some single cells (not all), that cell and several below it automatically highlight as a range... left-clicking initially highlights the cell, but as you release the mouse button, the others below it also highlight.
I am using Excel 2010. I have a pivot table where I want to highlight the ENTIRE row where a certain cell value equals something.
In essence I want all the Material Subtotal Rows highlighted "Orange" But as you can tell from the picture below I am having issues with the Body of the Pivot table. I have the formula checking to find whenever it finds the word total to highlight it.
The example below is showing how I need the row to be formatted. I can get the Data (Units) section formatted no problem. It is just the other part of the pivot table that I cannot format.
For the columns from Material to SAP # I have been trying to use Dynamic Name ranges using the Offset function. However, excel turns that Name range to a range and if I filter the pivot table, it adds extra ranges to the Applies to box and starts to really mess it up.
Using VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
I want to catch an error and reset the entire code to the very beginning and skip that entire entry. When I use "Next fieldSheetName" I get "Next without For," error 1004. Searches tell me I have an open block somewhere, but that's not true. Removing that statement (and having the loop iterate as normal) has no error at all.
Dim employeeName As String
Dim fieldMax, x, y As Byte ' Counters mostly
Dim workedHours, fieldSheetName As Integer
fieldMax = 204 ' Row number to stop on in the field time sheet
row = 4 ' Row specification for field time sheet. Begin at row 4 to ignore headers
' and start on the first name. This should not be changed!
Col = 3 ' Start at column 3 then increase by one to start going to next time entry
' RESET HERE!
For fieldSheetName = 4 To fieldMax Step 8 ' This is our MAIN loop. It iterates from 0 to fieldMax, which is 204...........
I'm trying to autofill a series of rows (that are blank) with data from an above row. I want to autofill the row in its entirety, not just filling in blank cells.
For instance (assuming comma is a new column). Colors listed are just a data example. Space between commas indicates a blank cell:
142, RED, GREEN, , YELLOW, , BLACK, PURPLE
(blank row)
142, GREEN, RED, ,BLACK, , PINK, ,
(blank row)
(blank row)
(blank row)
154, YELLOW, BLACK, , GRAY, , PURPLE, RED
(blank row)
(blank row)
So rather than it just completing the task in one desired cell, it would complete the task over the entire spreadsheet. Data spread can be as far as row 500 and column BY, so you can see how a copy + paste or a drag would get monotonous.
Another small example data set:
1,1,1453,0,10,-35
(blank row)
(blank row)
0,0,1448,0, ,-35
(blank row)
1, ,1443,1,3,-36
1,2,1408,2,7, ,
(blank row)
(blank row)
(blank row)
1,2, ,2,7,-39
(blank row)
(blank row)
1,3,1344,1,10,31
And column A will always have data (unless the row is completely blank.
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I have an index of 80,000 names from an index. Some names appear in multiple volumes and on multiple pages within a volume. While the name is the same, they are different people. The Roman numeral is the volume and the numeric is the page number.
Example of original data: Joe Shmoe V-225, 310 VIII-22, 86, 110
I have separated the data into separate columns. Now I have:
Col 1 Col 2 Col 3 Col 4 Col 5 Col 6
Joe Shmoe V-225 310 VIII-22 86 110
At this point, I want to combine the Roman numeral in Col 2 with Col 3 and 4 and combine the Roman numeral in Col 4 with Col 5 and 6.
There are way too many records for me to manually enter the Roman numeral where missing.
how can i select the cell to the right in a macro? i want to runa command in the cell to the right of the one i'm in after a caommand has taken place there
i.e.
1st command run in col b following by selcting the col c and running another command there
I'm having a column called "Body". Each cell in this column contains a huge amount of text. I want to select automatically certain values from that text and copy them into other cells. This image will explain what i mean:
I tried to work with the function MID but that doesn't work because the values don't have a fixed position. They don't start always at the same character number.
I want to copy every other cell in a row that isn't blank to another sheet. I am able to copy every other cell by using
=INDEX(Sheet1!$A1:$J1,2* COLUMNS($A$1:A$1)-1)+1) f
From this thread, by specifying a very long range. But the problem with this is that cells in sheet2 are filled with zeros when sheet1 has empty cells. I have to export the excell file to csv, I don't wan't trailing zeros or ,,,.
I wish to use an InputBox to select one cell in a row and then insert an entire row at that position. What is the VBA code to do this?
View 2 Replies View Related
