I imported data from another program to Excel, it is an address database. Some of the entries are all capital, some are all lowercase, some are proper. I would like to switch everything to proper. I have tried numberous times to do EXACTLY what I am reading about copy and pasting, entering the formula, designating the cells I want it to apply to. However, when I do it, nothing changes.
View 9 RepliesI have a number of large CSV files with approximately 1.9 million rows, (this is more then excel can bring in). I typically have to import/delimit the files when brining them into excel. However, when I try this I get the message not all data imported. I would like to be able to split the records in the csv file to multiple tabs in the excel woorkbook when doing the import/delimit but do not know how to accomplish this. The delimit of the data varies each time due to the nature of the data so doing a macro is more trouble to create each time. Currently I am having to open the csv file in notepad and split it up into multiple files then import each new file seperately.
View 4 Replies View RelatedHowever, I have got an Excel file which contains a lot of information. There are four sheets with large Pivot Tables.
But the thing is, the plan is to do the tables much larger, create tables which more specifically shows information. When doing so, the tables will show much more information, and therefore be much larger. It will be difficult to read and understand the tables because of the large amount of information.
What I want is to store information in, for example, another program such as Microsoft Access. There, I can put a huge amount of information and then link it to Excel, so that in Excel I only see the Access stored information when I "search" for it with y created slicers. Like, when I use my slicers and click on one category it sort out and shows me the information i want, even though it's stored in Access. It only shows it in Excel when I "ask" for it. This is what I have thought.
I immediately began having problems with formulas and pivot tables when I began importing data from an offsite postgreSQL database. For example, "countif" and "sumproduct" formulas invariably return values of 0. I can create pivot tables from the imported data, but nothing with a numerical value will group.
After fighting with this for literally hours, I finally noticed that all numbers in the columns were on the left side of the column meaning that the numerical data is being imported into Excel as text, even though the columns in the spreadsheet into which the data is imported are in number format.
Any way either to import numbers as numbers from the postgreSQL database, or to convert text to numbers after the data is imported.
I start my excel program from a "Shortcut" in "Folder 1".
That shortcut points an Excel program in "Folder 2".
When Excel is started,
Parent.Path returns "Folder 2",
but I really need to know what "Folder 1" was.
It seems that should be available as
when I do "Save File As"
it is pointing to "Folder 1".
Is there a way to find what "Folder 1" really was from the VBA enviornment.
I am trying to access another program via Excel VBA. The idea is that, we fill out out time and attendance sheets for work on excel workbooks. But, we have to go into a terminal program to enter this information so it can be uploaded to whereever it goes.
I am able to get the Shell command to work. But, it will be riddled with sendkeys commands and application.wait. I am sure that this is not the best way to program something like this. I believe I read that for this to work that it has to be COM compliant. I don't know. The program is a Java based terminal program.
This works for me
Code:
ShellExecute 1, "Open", "C:UsersPublic******lib***_core.jar"
But this does not
Code:
CreateObject "C:UsersPublic******lib***_core.jar"
It gives me a Run-time error 429, ActiveX component can't create object.
I recently had a virus on my computer and had to replace it. I had a ton of macros saved in my Personal.xlsb workbook, so I exported those modules and have now imported them to the new Personal.xlsb file. Now for some reason those macros no longer work in other files. Most of them are basic, like I have a macro to paste values or paste formats, etc. but I have some others that are very complex. The macros work fine as long as I am in Personal.xlsb, but if I try to use them in another open workbook I get the "all macros may be disabled or the macro may not be available in this workbook" message. I am using Excel 07 and have verified that macros are enabled.
View 3 Replies View Relatedi am creating a break track program using excel with vba. My excel file contains the data for all employees. I have a Userform where the user will enter his employee ID which will pull up his data. I have 3 option button in which the user choose what time he would start his break. Once the user click the start button, the time he started his break will be placed in a cell and a dialog box will appear stating the time the user needs to be back. Once the user click the end button, the time he ended his break will be place on a cell as well and then it will show a message "on time" if the user came on time else if the user was overbreak, the overbreak amount of time will be displayed. I have attached my sample file together with some vba code.
View 3 Replies View RelatedFor the last half dozen years I have been using a simple Excel table to sort Christmas mix cds. The headings are: song, artist, album, year, and songwriter. This year after adding the additions, I tried to sort and it would not work. The automatic sort stopped at the end of the previous years' work and did not pick up the additions. When I try to include this year's additions, the sort grays out. I'm sure it's something simple. Adding additions to my brother's and daughter's lists worked fine.
View 5 Replies View RelatedTrying to program cell C1:
If A1 is between .81 and 3, AND if B1 is Adult, then C1 is Priority Mail
If A1 is greater than 3, AND if B1 is Adult, then C1 is FedEx Ground
If A1 is Less than .81, AND if B1 is Adult, then C1 is First Class Mail
If A1 is Less than .81, AND if B1 is Child, then C1 is Hold for Inspection
etc.
There will be a list of ~45 conditions that will populate a specific value in C1. Can this be done? If so, how?
I have a workbook that requires refreshed source data each day. The workbook has all of the macros and formulas that analyze the data. I have the following code to import the worksheet with the raw data (onto a fresh worksheet in the calculation workbook), but I would like to create code that also adds the date and time to the imported data worksheet -- not the date/time the raw data was created; instead, when it was imported into my calculation workbook.
Below is my code for importing the raw data worksheet:
[Code] .....
I am working with Microsoft Excel 2003. I am trying to import(or something
like it) from worksheet (A) to worksheet (B). Worksheet A is a spreadsheet
that I have saved to keep the same row names, etc. but the information within
the named cells is forever changing. I also save the information from
worksheet A, but have another copy that when I open, it always opens without
any changed data in it. MY question/problem is that I need to import the
data from A to B, and every time that A changes, I need B to automatically
update the data and continuously add to the spreadsheet I have made up for B.
I can NOT have A overwrite any data that I have already put into B.
I've imported a few thousand lines of data into excel, but some rows have a rogue character or a blank cell in the middle of them taking up a cell and shifting the rest of the row along one cell and putting it out of sync with the columns I want that data in.
Is there a way of remedying this without going through and manually moving a couple of hundred rows along one cell.
I'm not sure I've explained that particularly well, so I'll try and illustrate it with an example.
AAA 1.23 1.23 BBB 1.23 1.23 CCC 1.23 1.23
AAA 1.23 1.23 BBB 1.23 1.23 CCC 1.23 1.23
AAA 1.23 1.23 BBB ------ 1.23 1.23 CCC 1.23 1.23
AAA 1.23 1.23 BBB 1.23 1.23 CCC 1.23 1.23
Ignore the fact that they are all 1.23, I've just used that to make it quicker for me to show. As you can see row 3 has a ------ (representing a rogue character or blank cell) in the 5th column shifting columns 5-9 right one cell.
Now as I said I have a few thousand lines of data like this with maybe 2-3 hundred rows with this problem and I really don't want to manually go through and fix each one.
Is there a tool in excel or a way of using VB to fix this?
Alternatively, is there a way when importing the data to have a number of delimiters rather than the one extra one you can select to remove these on importing?
Maybe it could be fixed by taking any blank cell (or character) and deleting it whilst shifting all cells to the right of it one cell to the left?
I have import the database from SQL server, all the records imported begins with a blank space and they can not be trimmed using Trim function. Is there any smart solution ? I prefer to get VBA code to solve the problem.
View 9 Replies View RelatedUsing VBA to clean up imported data ...
View 9 Replies View RelatedI am currently looking for a front end program to access multiple excel files at once. In a nutshell, I work for a company that uses subcontractors. Each subcontractor is graded in about 7 different performance categories. I receive daily excel files that give us the results for each category. I get separate files for each category.
What I do right now is use a master excel file. Every day I take each file I receive from our parent company and add it to the master file. I have a huge excel file that has a separate tab for each performance category. Then I have a "Report" tab where I use various formulas to summarize a sub's performance over a certain date range.
Essentially, the report tab is just a neat and concise way to display the stats of an individual sub, an office, a region or the whole company. I use tons of VLOOKUP and COUNTIF(S) formulas to look over the hundreds of lines of data and bring back the stats. It works but it is just not very efficient as I get hundreds of new lines of data every day.
to extract a number from an imported cell containing text, a number and date. i need to use this number as part of a formula in another cell and the data needs to be refreshed every hour.
eg. the cell imported is "USD 30.97 (March 27, 2007)" and i need to use 30.97 in another cell.
i've tried using data - text to columns, but i realised that after splitting the cells, the 2nd and 3rd columns can't be refreshed.
I have recently changed my software at my work from Sim-pro to Clik. I have about 4000 customer details that have been exported from Sim-pro to a CSV file but unfortunately some of the addresses are in one cell and need to be split up into 2 or 3 cell so it can be imported into Clik. In the Sim-pro program addresses are entered into one dialogue box e.g Address 1(house name - if applicable), Address 2(street name) & Address 3(suburb/area), after each line you press enter to separate them. The town/city, county and postcode do have their own entry box though and these do import normally into excel.
Unfortunately to import the addresses from the CSV file into Clik the Address parts 1,2 & 3 need to be in their own cells but obviously these are all in one cell(not every address have 3 parts some just use 1 address line which is fine). Can excel recognise the imported information from Sim-pro that is separated by 'enter' in that one cell and move them into another cell? I have tried using text to columns and selecting delimited and entering 'ALT 010' in the 'other' box but that doesn't work.I'm dreading the thought of going through 4000 addresses and cutting and pasting parts of the cells....
I have exported a aging report from SAL to excel. Now the problem is each figures in the report is not in number format. when i checked each cell contains a space after the numbers so excel does not treat them as a number format.
how i can remove all the spaces in those cells. find and replace doeasnt work.
I have imported some files in to excel. I have attached the test document to give you an example of exactly what Im working with. Here is what I need to do.
1) On a separate worksheet I need to sort out the data by invoice number (Column E).
In the example I have on the worksheet titled "Main" I have listed what I would like it to look like. The purpose of this is that I don't want any spaces in rows. I just want a long list of invoice numbers and their information (Including the project number & customer on all rows). In long story short I want to erase all the information from A18:A25, and add project number and customer name to all the correlated invoice numbers. The way I think I can do this is that the first 4 digits of the invoice numbers are the same if their in the same project.
i want to import data from sheet2 a1 from sheet1 a1 continously. now problem is when iam importing i shouldnt loose my previous data. eg: at time 11 when i import data to sheet2 a1 from sheet1 a1 with value 9. and at time 12 when i import data to sheet2 a1 from sheet1 a1 with value 10. value 10 will be over wrting value 9. here i shouldnt loose value 9. i want values comming afterwards should come to next row.
View 3 Replies View RelatedI have an excel spreadsheet that contains customer data exported from Quickbooks. In that file there is a column called CType (Column G) which contains the scheduling cycle for that customer. There are eleven different possible schedules, including 15xYr, 1xMo, 2xMo, EOM (every other month), EOW (every other week), EOW-S / 1xMo-W (every other week between 5/1 and 10/31 and once a month during the rest of the year), EOW-Th (every other week but must be on a Thursday), ETW (every third week), On Call, W, Q.
Although the number of records changes daily, on average there are about 950 rows of data in the spreadsheet.
I need to set up an array (?) for the values in column G starting with G2 through the last non-blank row (all records will have data in column G), and calculate the next scheduled service date based on the schedule type shown in column G and the last service date which will appear in column M of that row. The last thing I need to consider is whether there is a value in Column N, which would represent a hard-entered ‘Next Scheduled Service Date’. If I find a date in that column it needs to over-ride the calculated value. My assumption to this point is that I should use a new column T to hold the value of the calculated schedule date. There are a few other details, but rather than confuse this whole thing further I’ll stop there.
What I’m struggling with is the most efficient means of running this macro. I’ve been looking at many, many threads over the past few weeks, reading
VBA Programming for Dummies (which I apparently am), and reviewing other resources.
I have two work sheets where I have data.
Sheet1 contain daily input table which as follows:
Code:
Namesalary Bonus Check
XX1000 2 FN
XY900 1 NA
YY1100 2 FN
ZY1500 3 DP
ZZ1250 2 FN
AA1050 2 NA
AZ 950 1 FN
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
Code:
SALARY DATABASE
Name SalaryBonus
What I want to do is that ---it copy all the data which fullfile condition FN and move to the Sheet 2 which is salary database. Two important things to check is that. IF name already exists in the sheet 2 then it replace old info with the new one. Second thing is to sort the whole table(Salary database-sheet 2) according to A-Z (Name column). I use office 2003. I hope I provide all the information.
I want to be able to do, however. I want to make a spreadsheet that has all the equipment items preloaded into it, along with the quantity that we're supposed to have of said equipment. Then, I would like to import the data from the text file, having it match items in the spreadsheet to their equivalent in the imported text file, and then bring in the quantity scanned. That way, I can use some conditional formatting to show when there is a miss match between "Required" and "On-Hand" quantities.
What I don't know how to do, is get Excel to only import the name of the item, and the quantity scanned, instead of all of the information that the scanner spits out. Also, I don't know how to make it match the name, with the one preloaded into the spreadsheet, so that the correct quantities are matched up. Here's an example of what the scanner spits out: FIELD WIRE,6145-01-155-4256,[Scanned Quantity Goes Here],N/A,N/A,RESPONSE TRAILER,,
The scanner creates records like this the first time you scan an item. So if you scan Field Wire first, it's the first record. However, if you scan it fourth, it's the fourth record. How do I make that match up with a predesigned spreadsheet?
Have the following code:
With iSheet
i = .Range("A" & Rows.Count).End(xlUp).Row
j = .Cells(1, Columns.Count).End(xlToLeft).Column
.Range("A1", .Cells(i, j)).ClearContents
[Code] .......
If I use F9 to pause the code before the sort part in blue, then the data imports into Excel from the database and then subsequently pressing F5 sorts the data as required.
However, if I run the macro in a single pass, the data does not sort. Why it's not sorting as expected and how to make it sort as required?
I am importing data from my AS400 in Excel, the dates are coming into the spreadsheet as numerics. How do I convert these numbers into a date format? i.e. 3202002 should be 3/20/2002, how do I get the number to that format?
View 9 Replies View RelatedI want the script to find if the value entered in the form is matching the values in column 'A' in the database and if it matches then it needs to select the cell as active cell - to populate the form details. And if there is no matching value found, the script needs to select the last empty cell of the column 'A' to populate the data entered in the form.
1) Form has 10 different fields that needs to be filled by the user.
2) Field 1 - is a text box for 'Request #' to be entered by the user.
3) After filling in all the fields - once clicked on OK, the form should search for the the 'request #' entered on the form in the database (Form and the database are in the same workbook).
4) If the 'Reqeust #' in the Column 'A' matches the the 'Request #' entered in the form, then the matching cell should be selected (Activecell -Were the data can be overwritten, with the new entry)
5)If there is no matching 'Request #' found in the database, the script should loop to select the next available blank cell in column 'A'. So that the form data can be entered.
We have a software program that we use to takeoff HVAC equipment on drawings. It will export all of the items to an Excel worksheet. Once it is into Excel I need to sort the data by two or more different columns, then sum three to four columns for each unique item for transfer to the equipment sheet for pricing. I've searched this site and others, but have not found a way to do this with VBA in Excel.
Floor
Rank
Name
Description
Qty
Cost
Labor
Seismic
[Code]....
The sheet is a simplistic view of what I'm trying to explain, obviously in high rise there will be many floors and hundreds of items. The actual spreadsheet has approx 12 columns, but only 3 or 4 need to be summed per similar item. Most times I sort by Range & Name. On occassionwe need to sort by Floor, Range & Name. Used to do this with a Database & RR Report Writer, but the new software does it onscreen with digitized drawings.
I've created a spreadsheet which, on running a macro, imports data from a text file, formats it and then sums various parts of it giving me a subset of the large file as a range of data for a chart (a pie chart) on Sheet 2.
The problem begins when I delete the data in the worksheet in preparation for another import - the Pie chart just loses all the data and I have to manually reselect it in the chart each time.
Once deleted the chart is blank, but as soon as the data is imported, I get reference errors when I click on Sheet 2
I must be doing something wrong. You can delete data and repopulate it and the chart should pick up with the new data. If the cells it is referencing are empty, it is blank. Not so here.
Is it to do with importing the data? Or the formula for my chart data?
I am trying to achieve can not be based on a range of rows or cells it must as this data is imported from a forecasting application and the location of the targets may change.
Perhaps an offset to the current selection can be used some how, but have a look-see if you know where Im coming from.
'I have used this to find a target in a data range.
Dim r1 As range
Public Sub FindDataIn Range(r As Range, target As Variant)
Set r1 = r.Find(target)
If r1 Is Nothing then
Msg Box target & " was not found"
Else
r1.Select
End If
End Sub
'Then I inserted and Named this procedure to find the data on various assumptions or targets - SUCH AS THE VALUE "14306".
FindDataInRange ActiveSheet.Range (A1:A226), "14306"
Selection.EntireRow.Select
Selection.Copy
Selection.Insert Shift:=x1Down
Selection.EntireRow.ClearContents
Then I write this again for another Target such as 14307 and it repeats
The result is that it finds the target cell I get an empty row above the two rows that contain that target. (LET ME EXPLAIN WHAT I MEAN BY TWO ROWS)
The thing is there are two rows containing 14306 in that range and the range is sorted ascending so that they are positioned one under the other. Each row has different forecast totals beside this number because one is an export SKU and one is a Domestic.
What I want to do is combine the two rows as one with one row of forecast totals for the number rather than two.
Like this:
14306big Widget Domestic 26 89 (This is combined as a new row)
Instead of this:
14306big Widget Export 12 14 (These 2 rows are then deleted)
14306big Widget Domestic 14 75
Also the Forecast totals run across 12 columns (one for each month) and then there is a column for year totals of each row that needs to remain the same.
Most important this here is this cannot be based on a range it must as this data is imported from a forecasting application and the location of the targets may change.