How Do I Program Multiple Conditions Within A Cell In Excel?
Jun 3, 2009
Trying to program cell C1:
If A1 is between .81 and 3, AND if B1 is Adult, then C1 is Priority Mail
If A1 is greater than 3, AND if B1 is Adult, then C1 is FedEx Ground
If A1 is Less than .81, AND if B1 is Adult, then C1 is First Class Mail
If A1 is Less than .81, AND if B1 is Child, then C1 is Hold for Inspection
etc.
There will be a list of ~45 conditions that will populate a specific value in C1. Can this be done? If so, how?
In column A, I need to highlight the cells green if the value is less than < the values in columns B and C, yellow if A = either B and C, and red if A is greater than B and C. But I only want the formatting to stay in column A. I'm using Excel 2010 and Windows 7.
I am currently looking for a front end program to access multiple excel files at once. In a nutshell, I work for a company that uses subcontractors. Each subcontractor is graded in about 7 different performance categories. I receive daily excel files that give us the results for each category. I get separate files for each category.
What I do right now is use a master excel file. Every day I take each file I receive from our parent company and add it to the master file. I have a huge excel file that has a separate tab for each performance category. Then I have a "Report" tab where I use various formulas to summarize a sub's performance over a certain date range.
Essentially, the report tab is just a neat and concise way to display the stats of an individual sub, an office, a region or the whole company. I use tons of VLOOKUP and COUNTIF(S) formulas to look over the hundreds of lines of data and bring back the stats. It works but it is just not very efficient as I get hundreds of new lines of data every day.
I am creating a report where there are multiple conditions and I am using MS Excel 2010.
Summary sheet will display Date of Completion - If the exam has been taken already In Progress - if the exam has been started but not yet completed Not Started - if the exam has not yet been taken
Available data in Source sheet Completion_Date - Date when the exam was taken or "Blank" if the exam is still In Progress Completion_Status - Completed & In Progress only (all subjects that are not in the Source sheet shall be tagged as "Not Started"
I am creating a document log that tracks all excel files sent and received.
I use RDBmerge to get the filenames and data from the file batches.
My current macro edits the data down to the last stage of data needed to create the log.
My example workbook shows the final stage of the RDBMerge Data "Rough_Data" and then the final data formatted needed for the Log "Final_Data"
Included on the "Rough_Data" worksheet is the Code log used to complete the "Final_Data" worksheet.
I have highlight the cell range on the "Final_Data" Sheet that I need to complete.
filenames can occur multiple times from the RDBmerge, so only one occurance of the filename is place in column B of the "Final_Data" worksheet.
The criteria is this:
A column on the "Final_Data" worksheet as been Named for Each of the possible "Record Types" from Column G of the "Rough_Data" Worksheet. ("A,B,C,D,E,I,O,P,Q,T,V,W,X,Y")
I then must look through the "Rough_Data" worksheet for the first occurrence (if any) of that record type for each filename on the "Final_Data worksheet. If an occurrence is found I then must look at the "Unique ID" & "Program" Columns of the "Rough_Data" Worksheet. The key (on the "Rough_Data" worksheet) is used to determine the code that is written to the corresponding cell.
i.e. "Final_Data"Date FileName Field2 User Direction Method
[Code] .....
I would very much like to automate this process, as sometimes I am dealing with over a hundred files with 30 plus rows of data each.
I need to create a macro that will calculate a value based on the contents of multiple cells. Looking at the example attached, if columns A and/or B (employee ID and name) are empty, then allowable OT (G) should be 0. If either have data, then if Stage (F) is CAN, G should be 20. If Stage is FAS or FAR, G should be 10.
I'm not very savvy with IF statements, which is how I imagine this can be done, and I don't know if this would be easier to do as a macro or as a formula within G. Since the contents of the of the cells will be changing on a weekly basis, I'd prefer the formula to only be there if there is content on the line, so we don't have nulls showing.
Attached is my worksheet. I need to program column C to adjust the value in column A according to the rules set in table J2:K17, but ONLY if the value in column B = mens. If the value in B does not equal mens, then leave the C cell blank. I've manually populated column C to show the end result that I'm looking for.
I tried a simple =IF(ISNUMBER(SEARCH("Small",A2)),"S",""), etc., but I can't figure out how to incorporate the additional condition that would let the cell return a value ONLY when a condition in B is also met.
NBVC helped me with a similar request previously, but with that formula, if the condition wasn't met, the cell returned "#N/A" instead of being blank.
I am trying to access another program via Excel VBA. The idea is that, we fill out out time and attendance sheets for work on excel workbooks. But, we have to go into a terminal program to enter this information so it can be uploaded to whereever it goes.
I am able to get the Shell command to work. But, it will be riddled with sendkeys commands and application.wait. I am sure that this is not the best way to program something like this. I believe I read that for this to work that it has to be COM compliant. I don't know. The program is a Java based terminal program.
This works for me
Code: ShellExecute 1, "Open", "C:UsersPublic******lib***_core.jar" But this does not
Code: CreateObject "C:UsersPublic******lib***_core.jar" It gives me a Run-time error 429, ActiveX component can't create object.
I am trying to have a value returned in cell C3 if two conditions are met. In Cell C3 (Sheet 1), if the value in Cell A3 (Sheet 1) is listed in column A on sheet 2, and the 12031 is listed in column B on sheet 2, I need the value of Open to be returned.
so what will happen is that the number of rows will continuously increase as the groups of data (Labeled Group #) increases. The data within each group will vary from time to time so some groups may contain only one line while others may contain multiple lines. I have included an attachment that illustrates what I'm trying to achieve. When data is entered in Column A under "Q," the adjacent empty cells in Columns B-F (labeled "R"-"V") will turn red. This is the part I have (i.e. Group 2).
if I want 2 conditions satisfied in order for a value to be returned, would I need to set up/name tables, set ranges, etc? e.g,
If A1 contains baby, AND B1 contains Carly, then C1=carly.jpg If A1 contains girl, AND B1 contains Carly, then C1=carlyg.jpg If A1 contains baby, AND B1 contains Billy, then C1=billy.jpg If A1 contains summer, AND B1 contains Wally, then C1=winter.jpg etc.
Roughly 40 different conditions will be needed. What formula would I use and how should I name and set up my table?
=AND($AE$2:$AE$10<=$F$2:$F$2000;$AE$2:$AE$10>=$E$2:$E$2000) With this I am checking for conditions to be true or false
Lets say I am checking AND(AE2 <= F2 ; AE2>=E2) this tells me if date in cell AE2 is smaller or equal to Cell F2, but how can I set this fromula to check if all the cells from F2 to F1000 are equal to AE2 so If I write date into Cell AE2 it checks all dates from F2 to F1000 and check if condition is true or false (and if I write date in cell AE3 it should check all the dates from F2:F1000, if date in AE3 is in this range)
i am creating a break track program using excel with vba. My excel file contains the data for all employees. I have a Userform where the user will enter his employee ID which will pull up his data. I have 3 option button in which the user choose what time he would start his break. Once the user click the start button, the time he started his break will be placed in a cell and a dialog box will appear stating the time the user needs to be back. Once the user click the end button, the time he ended his break will be place on a cell as well and then it will show a message "on time" if the user came on time else if the user was overbreak, the overbreak amount of time will be displayed. I have attached my sample file together with some vba code.
I imported data from another program to Excel, it is an address database. Some of the entries are all capital, some are all lowercase, some are proper. I would like to switch everything to proper. I have tried numberous times to do EXACTLY what I am reading about copy and pasting, entering the formula, designating the cells I want it to apply to. However, when I do it, nothing changes.
Trying the following syntax and I do not get any value in the cell if either of the conditions are true. Pretty sure I'm nesting the functions incorrectly. Maybe I should use Index/Match? =IF(AND(E24="SI",F24="SI"),"ER2","",)IF(AND(E24="sn",F24="sn"),"er2","")
I am trying to write a Macro that would go into same specific cells in multiple worksheets and paste the data into one summary worksheet if ofcourse a criteria is met.
The multiple worksheets have the same format. The worksheets are numbered 001, 002, 003, 004, etc (increase on a daily base) ..
For the last half dozen years I have been using a simple Excel table to sort Christmas mix cds. The headings are: song, artist, album, year, and songwriter. This year after adding the additions, I tried to sort and it would not work. The automatic sort stopped at the end of the previous years' work and did not pick up the additions. When I try to include this year's additions, the sort grays out. I'm sure it's something simple. Adding additions to my brother's and daughter's lists worked fine.
My Excel skills are basic at best, with no knowledge of VBA other than finding the VB Editor. What I'm trying to do: Attached is the file I'm working with, to give you a better idea. When a name is selected in column B, the cells in the non corresponding columns E to N should have a black background color. For example, when you select Mike in column B, the cells in that row in columns I to N, named Dave and Dean, should become black. If you select the name Dave, columns E to H (Mike) and M to N (Dean) should become black. In addition, the background color of the non-black cells should change depending on the status.
OK : green FAIL: red N/A: orange Exceptions: blue
The attached file shows a few possible results, manually entered.
Sheet1 contain daily input table which as follows:
Code: Namesalary Bonus Check XX1000 2 FN XY900 1 NA YY1100 2 FN ZY1500 3 DP ZZ1250 2 FN AA1050 2 NA AZ 950 1 FN
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
Code: SALARY DATABASE Name SalaryBonus
What I want to do is that ---it copy all the data which fullfile condition FN and move to the Sheet 2 which is salary database. Two important things to check is that. IF name already exists in the sheet 2 then it replace old info with the new one. Second thing is to sort the whole table(Salary database-sheet 2) according to A-Z (Name column). I use office 2003. I hope I provide all the information.
However, I have got an Excel file which contains a lot of information. There are four sheets with large Pivot Tables.
But the thing is, the plan is to do the tables much larger, create tables which more specifically shows information. When doing so, the tables will show much more information, and therefore be much larger. It will be difficult to read and understand the tables because of the large amount of information.
What I want is to store information in, for example, another program such as Microsoft Access. There, I can put a huge amount of information and then link it to Excel, so that in Excel I only see the Access stored information when I "search" for it with y created slicers. Like, when I use my slicers and click on one category it sort out and shows me the information i want, even though it's stored in Access. It only shows it in Excel when I "ask" for it. This is what I have thought.
have a formula or something along those lines that will look for the data you type in to the selected cell and will show you on how many workbooks it has been entered in. For example, I have workbook a, b, c, d, e, f. all have 12 sheets. On these 12 sheets there is a place to enter the serial number of an item. What I would like to be able to do is on a different workbook be able to type in a serial number and have it show which workbooks it has ever been typed in and its location on said workbooks. and if possible the results of the item which would be whether it was accepted or rejected( this bit is not totally must have. but the workbook and sheet location is a must.)
I have an Excel 2003 list with four columns as shown below:
Zipcode CRRT Count Bundles
85710 C004 693 14
85710 C005 867 18
85710 C006 1021 21
I want to "expand" this list to use in a Mail Merge program to produce tags for our direct mailing. Each bundle contains 50 letters, so in the first line on the above spreadsheet, there will be 13 bundles of 50 and 1 of 43. Currently, I can cut and paste to create the following table, but there has to be an easier way...
Zipcode CRRT Count bcount Bundle ibundle
85710 C004 693 50 1 14
[Code] ........
So as I pull this into a mail merge I will get a tag that shows the zipcode, the crrt, the total pieces for that crrt, then number of the bundle for example " 1 of 14" and the quantity in that bundle, for example "50 of 693", then the next bundle tag will print, 3 to a page. I know that here has to be an easier way either in the mail merging process itself or with EXCEL? Am even open to build these with ACCESS to create the tags. The beginning database contains anywhere from 350 to 800 lines of original data, so as you can see the cut and paste is VERY time consuming.
Can I program column B to show a certain value depending on the presence of a string of text in column A? For example, if A1 contains the word "Barbie", then cell B1 shows the value: "Ken"
I have a simple program that picks up an ID on sheet1, finds that ID on sheet2, picks up the information in one cell from sheet2, and brings that information back to sheet1.
The program works fine until for all IDs above row 570. After row 569 something strang happens. The programs is still able to find the ID but when it tries to pick up the one cell value it is saying it is blank yet you can physically see the data is present.
In all my years of VBA programming I have never encountered anything like this. Especially, where things work fine on half the worksheet and not on the other.
I am posting the code below, but I don't actually believe it is in the code. I cannot post the workbook because of the information it contains...
The thing is that i have alot of sheets (more than 20) and my program picks 2 values from the same cell locations on each sheet. This leeds to more than 30 arguments in my formula. I am gonna use this for alot of excelfiles constructed in the same way, but with varying order and names on the sheets.
I've got no clue about all this, but I've had to get specific formula examples and fill in the blanks in order for my timesheet to work. There's just one final problem if somebody could please help.
This is a timesheet for a 5 day work week. I need to count the number of unique log numbers for a specific activity. The log numbers counted must be unique across the entire week, not just for each day, which means I want the formula to count the unique log numbers across multiple sheets.
The formula also has multiple conditions. I got 2 columns. The first part of the formula needs to verify a word, say, "split" and if it does it checks the adjacent cell for a unique log number. If both arguments are true, it counts the log as 1 unit.
Here is a working formula for only one page. =COUNT(IF(D4:D29="split",IF(FREQUENCY(C4:C28,C4:C28)>0,1,)))
Here's 2 problems with this formula: 1. I will count if it encounters a blank cell in the Log numbers the first time (which will happen as not every activity we do has a log#), but it will stop counting if it encounters a second blank cell.
2. I don't know how to make it work across several sheets.
This is an alternate formula which works and skips the blank cells, but I don't know how to add the multiple condition of "split" and to have it work across multiple sheets. I just copied it Microsoft. As I said, I don't understand it, I just fill in the blanks.
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
