Is there a way to incorporate these 3 boxes into one? So if I enter a figure into any cell, it will calulate it for the other two? Without overwriting the existing formula. I have attached the problem.
problem.xlsx
I have a template with formulas calculating a default value, but still allowing the user to override the cells with direct input.
I want to use conditional formatting to highlight any cells that have been overwritten, but can't find a way for Excel to differentiate between a cell with a formula or an inputted constant.
I realize there is a VBA "isFormula" function, but I don't want to have to use VBA for this.
a formula to direct me to a certain tab.
Example:
I have a cell with a number, say 312260 and a tab with the same number as the name, I need a formula to send me to that tab.
The spread sheet I have written reaches a point, where I want the "ENTER key depress" to jump to a cell to the right instead of the cells in the same column lower in the sheet, is there a way to do this?
View 9 Replies View RelatedI am attempting to setup a spreadsheet that summarizes data from a set of other workbooks. The woorkbooks the data comes from is different for each year. However, I would like to have just one summary that can be changed based on the year entered.
In B1 the user enters the year. Say 2012
In the bulk of the spread sheet below the cells refrence
='C:...["&B1&" Pt. Visit Stats.xlsx]Summary'!$B$6
As I am sure many of you can guess I am getting a #REF! error. I just do not see why it shouldn't work.
I do not want to use the indirect function, because the refering workbooks would need to be open to draw data. I am guessing that I will probably need to research the Harland Grove Pull VBA work or more likely include a copy of Morfunc and then use the indirect function. But, I though I would ask here first just in case I am missing something relatively simple.
How I can directly write info from an external application to an Excel sheet
Actually, I'm using a special dll collection to do it, but I would need to buy the 64 version soon. Problem is I use only one function of the entire collection so I want to look on how to create it my self. Basically, it took data from my charting software and write directly to my Excel Worksheet.Cell
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies View Relatedmaking a macro that will scan for duplicates, length & empty cells.
I have the sample file below that does conditional formatting but it doesnt help as much because I want to show the reason for the highlight's on a comment instead.
sample file : [url]
file that might help out: [url]
checks would be:
column A - duplicates and/or length should not be over 100 characters
column B - duplicates
column F - should only contain 2 comma's(or 3 keywords)
all columns - check if no entries are found(empty cells)
I used a form with textboxes for data input for one of my vb macros. Currently I have the private sub from the form transfer those entries to a remote cell on the spreadsheet, (like in column "HZ"), so that the macro that will actually utilize them can retrieve them. Is there a way to pass that data directly from what is entered in the form in the textboxes to the macro that will actually use them?
View 4 Replies View Relatedhow can I prevent an entry in a cell even without formula lets say cells B1 , C1 , D 1 , E1
I want to prevent an entry in these cell and if you try an error message will display
I have a problem to solve
I have 2 worksheets named 'Products' and 'Order'
At the 'Order' i use 3 cells
Code
Pallets
Cases
When i entered a code to the cell 'code', it reads the code from the sheet 'Products' and then transfers to the active sheet 'Order' some items.
What i want is:
Because the user has to enter the quantity either to the cell 'Pallets' or
'Cases' i want to be locked the empty cell each time and to be used for calculations.
1st Eg.
The "45870"
Pallets to order : 50
because the user used the pallets the cell "Cases" must be locked and it must calculate the 50 pallets*100 so
Cases : 5000
2nd Eg.
The "45870"
Pallets to order : null
Cases : 5000
because the user didnt use any pallets the cell "Pallets" must be locked and it must calculate the 5000 cases/100 so
Pallets to order : 50
I'm trying to set a cell so that it has a certain value based on other cell(s) information. I can put a formula into the cell to do that, but I also want to make the cell available for user input, preserving the formula should the user change their mind and delete their input.
Basically, it's a cell with a protected formula that can be overridden with user input, then if the user decides to take their input back out, the formula kicks back in.
=IF(E14<=0,0,IF(N9="yes",MAX(E15*C15,30),30))
I am currently using the above formula and need to make an addition to it.
If D8 is greater than 9000 and less than 9999 then the entry will be 35 rather than 30. Any other entry in D8 would leave it at 30
i'm sure this can be done but i cant get an angle on the method. i want to use VBA to put a formula into cell G3 based on the users entry in cell D3 so, for example the user enters M in cell D3 and the VBA code puts the formula "if D3="M",A3,0"into cell G3
i know i could use a formula in the cell but i want it to work with multiple entries so i figure VBA is the way to go.
Trying to write a formula that looks for the first number in the same row, then returns the value in that column in a different row. In the example included, cell A-7 should contain the formula. Within row 7, determine the column where the first number is listed (column D in this case), then return the value listed in row 3 of that column ('C' in this case).
I've tried Lookup, Index, and Match functions, but can't seem to get the right combination.
I need a formula that displays the word "Day" or "Days" depending on cell entry i know the formlula =IF((B12)>0,"Day","") to show the word day but i want it to show "day" if a 1 is entered or "days" if any number over 1 is entered.
View 2 Replies View RelatedIs it posible that when data or text is entered into a cell and the enter key is pushed that this can either run a macro or activate a hyperlink to go to another worksheet for user to follow further instructions?
OR instead of going to another worksheet a pop up message appears with instructions and then can be OK'd to remove message and proceed?
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
say sheet 1 has 2 collums A & B
collum A is Names Collum B is Dates
A B
Bob Fenton 05/04/08
Rob Smith 05/06/08
Al Feth 05/08/08
Al Feth 05/18/08
Al Thomas 04/23/08
Rob Smith 05/23/08
Bob Smith 04/22/08
Bob Fenton 05/15/08
Al Feth 05/10/08
sheet 2 has unlimited collums in collum A is the name of the person in collum B to Z (or more) i would like a fomula that will search sheet 1 and return the dates for each entry of that name.
so sheet 2 would be like ....
I have a row of dates in row 2 (all sequential, from Nov through to June next year)
I have a row of number entries in row 3 (to correspond with the date in row 2 it was entered on).
I want to be able to add a new entry (a number) into a text box, click a macro button, which makes the text box input be moved into the cell underneath todays date (so every day the cell will move one column along)
I've managed to make myself a textbox, and a macro button, but I'm stuck with how to make it all work.
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies View Relatedi have an address that is all in one cell displayed like
101 hampton Court, Hampton heath, Hampton Town, Hamptonshire, HA01 1AS
but i need to have it split in to individual cells so
Cell A1 would be 101 hampton court
B2 Hampton Heath
C2 Hampton Town
D3 Hamptonshire
E5 HA01 1AS
each part of the address is split by a comma, so i have tried to use that as a identifier as to where that part of the address is, but failed on that, i can separate out the first part and the post code with a find and replace but not the middle.
also i need it to work backwards ie
it finds the post code first,
then the county
then the town
as those 3 are always the last 3 parts, but the address could only have 1 line of addres beofre the town or 3, and it would get messed up as all the post codes, county ans town needs to be in their respective columns
Is there a way to connect direct to the newsgroup below via OE6:
microsoft.public.excel.worksheetfunctions
It doesn't appear in the newsgroups' list ..
--
Rgds
Max
xl 97
---
Singapore, GMT+8
xdemechanik
http://savefile.com/projects/236895
--
Is it possible to import data directly from an email into a spreadsheet?
I have a spreadsheet used for tracking status of new tasks. The tasks are entered manually with the details taken from an email in most cases.
To speed up the data entry i am hoping I can create an email template or an excel template kind of form whereby the originator would fill in set fields/cells, send to me and i would import to the next available row/s in the spreadsheet.
I have a RecordSet that has been built and accessed sequentially with no problems. I now want to access it directly, via it's Primary Key.
I know I can access it as follows :
With MyTable
.MoveFirst
Do Until .EOF
If ![PrimaryKey] = Work_Key Then
MyData = ![Data_To_Extract]
Exit Do
End If
.MoveNext
Loop
End With
As a MainFrame Programmer, I would expect to be able to access that record directly, via it's Primary Key, something like :
Read MyTable Key = Work_Key
MyData = ![Data_To_Extract]
Am I thinking too much like a Mainframe Programmer (that *is* my trade, it's difficult to adjust sometimes !)? Is the With - Do/Loop method the way to go, or is there a Direct Read method I should be using?
I'm trying to set up a direct link to the internal excel calculator, using a button in VBA. I have the shortcut on my own toolbar, but I have many users that use the workbook, and to get them all to set up is almost impossible, so I am trying to make it simple for them.
I've tried doing it through a hyperlink direct to the calc.exe file, but get a lot of messages popping up (that'll scare a few of them). So thought I would try and find the excel name for it and use VBA, but I cannot find it anywhere.
I need to send emails and have the "Direct Replies To" field updated to a different address.
This is my code. I've remarked what I tried, which is NOT working.
VB:
Dim OutApp As Object
Dim OutMail As Object
Dim EmailBody As String
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)
[Code] .....
I have an Excel 2003 list with four columns as shown below:
Zipcode
CRRT
Count
Bundles
85710
C004
693
14
85710
C005
867
18
85710
C006
1021
21
I want to "expand" this list to use in a Mail Merge program to produce tags for our direct mailing. Each bundle contains 50 letters, so in the first line on the above spreadsheet, there will be 13 bundles of 50 and 1 of 43. Currently, I can cut and paste to create the following table, but there has to be an easier way...
Zipcode
CRRT
Count
bcount
Bundle
ibundle
85710
C004
693
50
1
14
[Code] ........
So as I pull this into a mail merge I will get a tag that shows the zipcode, the crrt, the total pieces for that crrt, then number of the bundle for example " 1 of 14" and the quantity in that bundle, for example "50 of 693", then the next bundle tag will print, 3 to a page. I know that here has to be an easier way either in the mail merging process itself or with EXCEL? Am even open to build these with ACCESS to create the tags. The beginning database contains anywhere from 350 to 800 lines of original data, so as you can see the cut and paste is VERY time consuming.
Working on athletics worksheet. Have worked out a formula to attribute a PB (Personal Best) in a MIN range not including the first cell entry (as first entry is not a PB) in events where less =PB
=IF(ISBLANK(F6)," ",IF(F6(MAX(V$5:V6)),"PB"," ")) keeps recognising first entry as PB. Any help greatly appreciated
first entry could be anywhere in the column but all entries after will be below it.
I'm creating a spreadsheet where a test note taker needs to repeatedly enter the date/time code in a column as events occur.
I tried recording a macro that will enter the =now() formula and then copy that over itself with the value but didn't work.
So now I'm thinking I need to just write code that will determine "now", and write that serial value to the next open cell (with care not to overwrite the previous data point). I'd like to execute this with a simple keystroke.
The thought is to start at the top of the column, go down until the next blank cell is reached, insert the time code (can't be a formula that will change but an actual value).