I have a single very huge excel file. That file contains several sheets. Many of those sheets contain PivotCharts. I want to iterate on all of those pivotcharts and make an image file like jpeg,gif,png,etc.
View 9 Replies
Is it practical to attempt to iterate over all cells in Application.Cells when using Excel 2007? I am truely amazed by the number of cells available but slighty unsure of the practicality of a spreadsheet which attempts to use of the 17,179,869,184 cells in each worksheet!
View 9 Replies View RelatedHow many switches? 4
The result should look like this:
interface range GigabitEthernet1/0/1 - 48,GigabitEthernet2/0/1 - 48,GigabitEthernet3/0/1 - 48,GigabitEthernet4/0/1 - 48
this is what I have so far:
=REPT("GigabitEthernet, ()/0/1 - 48,",D1)
I need the area in the parentheses to iterate to the number of switches
I'm trying to iterate through a range of merged cells, but each cell in the merged row is being iterated through and I want it to go from row to row. This what I have, but the subscript goes out of range since is looking at the cells within the merged rows.
View 4 Replies View RelatedI have a number of listboxes on a worksheet that I want to use to filter data on another worksheet.
I thought something like the following would work but I need the correct syntax and/or modifications to the method:
for each listbox in activesheet.listboxes
for each selection in listbox.selection
filter data accordingly on other sheet
next selection
next listbox
Suppose you have 3 variant Arrays, named sArrPos1, sArrPos2, and sArrPos3.
What is the syntax for using an integer variable to specify which of the three to work with?
E.g.
[Code] ......
I want to work with sArrPos1 first, then sArrPos2, then sArrPos3, but can't hard type them.
Essentially, I have a column of integer values which I would like to iterate through. The integers in the column vary from 12 to -12 with the exception of 0, so 24 possible integer values here.
For each possible value, I would like the activecell.offset(0,7) value added to a variable.
So if I iterate from cell A1 to cell A10, each time a value of "1" appears, I would like the cell 7 spaces to the right of the "1" cell added to a "total" variable for "1" e.g.: "totalOne".
The same applies for every value within my range. So if there are three instances of the value "8" between A1 and A10, then each value 7 cells right of those "8" values will be added to a total value for the value 8.
I started to use:
select case range("u4:u150"). value
case 1
Dim value1 = value1 + ActiveCell.offset(0, 7).Value
However, at this point I realised that a switch statement stores the range I have given it as an array, so my 'case 1' cannot work as it is trying to compare an integer with an array.
Finally, if it stores an array, surely it wouldn't be able to get cell.offset values as it would have no references to those locations given that the array is just a group of integers, not actual cell references? Will I have to use lots of "for each" statements? hope not!
I have a spread sheet that has various references
on the same sheet
on a different sheet ( in same workbook )
on a different sheet ( in a different workbook )
If I click on a example cell it might say
Code:
=5*C4*$D$1-Sheet1!C9
Is there a way for excel to be able to iterate through these separate variables ? and know if the reference is on the same sheet ?
Say I wanted to evaluate the references on other sheets ( replacing the link with the value )
So if Sheet1!C9 contained the value 10 the formula would be replaced with
Code:
=5*C4*$D$1-10
I have never used EXCEL before, but I have a copy of EXCEL 2000.
My question should be easy to answer for experienced EXCEL users
(I hope ).
QUESTION:
1. Where can I find a DETAILED example that shows how to use EXCEL to
calculate the iterated CHAOS function A*x(1-x) ??
for:
1.1 A = 2.0; x0 =0.01 // simple converging function
1.2 A = 3.3; x0 =0.02 // period-2 orbit
2. THe example would be great if it included a DETAILED example how to produce using EXCEL.
i Am trying to get this project underway and can attempt this manually in excel but will take ages. I was wondering if there is a code I can use. I am trying to get a 7 character alphanumeric serial number for units as a 4(alpha) and 3 numeric number. like say AAAA001 , i want to list on a row all the numbers on a sheet right upto ZZZZ999
View 5 Replies View RelatedVBA coding for automatically saving an excel file as another file using the current date as part of the file name together with "32ga" as a constant add-in. I also what this macro to run at a particular time of the day let say 00:20hrs. The excel file i want to save as is always open . It has data that changes every 24-hrs.
View 1 Replies View RelatedI have a template file for ordering trafolyte and steel plates. I have added macros to this template file. The existing macros do the following (shortly described):
Macro 1: clears order
Macro 2: update order date + send a read only file to the supplier of plates + save a read only copy of the file into one of three folders acc to info in one of the cells.
It's the Macro 2 I want to edit.
I want to add a "function" which copy a selection of data.column A to N from row 12 to 548 but only the rows where there is a value in column A.
Row 1 to 11 includes standard order info and Macro buttons.
Row 11 includes the heading for order data.
For everytime someone click on the Macro 2 button in the template file, I want the selection to be paste into the first "available" row in a "Total list" file.
The "Total list" file may have to be open (or a function to open, paste selection and then close the "Total list" file may be added)
File and Folder info:
To simplify suggestions, the following file and path info can be used (I can change to the correct later):
Template file name: template_order.xlsm
Template file location: \servershared emplate
Total list file name: total_list.xlsx
Total list file location: \servershared otal
Selection info:
The template file exists of a "general order info area" A1:N10
The column heading for order data is located at A11:N11
The selection to be copied is A12:N550 - But only rows where column A includes data (not empty).
(If the spesific order consists of 14 plates than there will be item no 1-14 in column A and I then I want to copy A12:N25 (row 25 will be item 14).
When I try to use record macro it looks like it only records what's happening in the template file - It doesn't record the pasting in the total list.
I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez()
Dim IE As Object
Set IE = CreateObject("InternetExplorer.Application")
IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com
IE.Visible = True
While IE.Busy
DoEvents
Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()"
'this is the name of the download link as from when i hover my pointer over download link.
End Sub
loop and range function to apply in the below code through which I can avoid writing code for all the rows.
I am trying to open excel files located in single folder from files name (along with the path) in single worksheet (Column B and Row 1 to 500).
I have created follwing code which opens the file and then runs a macro in it.
a Sub Test()
Dim strFName As String
strFName = Sheet1.Range("B2").Value
[Code].....
I'm working on the following
Workbooks.Open Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-" & Ucase(Format(DateAdd("y", 0, Date)), "YYYY-MM-DD")&".XLS"
ChDir "D:CommondataIBMmain"
ActiveWorkbook.SaveAs Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-NAFTA.XLS", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
ActiveWindow.Close
Date: 2009-06-03
What I'm trying too do is open a file, make an exact copy and save it under a new file name.
My problem is in the date formula the day is not always the same. In the sample case it's 03 at other times the day will change.
is there a way too get this too work irregardles of what the day might be?
The code below looks at file names in column A and then goes to a folder and opens and copies the data in range c2 -lastrow from each file and pastes the data into sheet2.
how I could add to the code so that it also inserts the file name in column c?
It would make it easier to track the data in column B.
VB:
Sub CopyFromFile()
Dim fPath As String
Dim lRow As Long
[Code].....
I have attached a sample workbook. The list of file name is in sheet 1. An example of the output is in sheet 2. The data in column A is dummy data generally spans 100's of rows not just 10 as in the example.
The purpose of the code is to be able to put a list of file names in column a in sheet 1 and extract data from those files in a folder. The data extraction works fine. The reson for adding the file names is so that I know what file the data came from.
I have a requirement to download a lot of historical data files from the archieve of an website. The url goes something like this: [URL]....
This downloads file for 21022014 ie. 21-Feb-2014. I need to be able to have a facility to have a selection criteria on my user form (in excel) where I specify a date range and the macro automatically downloads all the valid excel files available within that date range (files for Saturday, Sunday and some holiday dates will not be available in the website archive database) one after the other (like at single clcik of button) into a specific location (predefined viz.. c:/Users/EOD files/) on my laptop. Best would be if I am able to select the save location run time by using a 'Browse' like feature where I go and choose my local laptop folder...same type when we try uploading a file from our laptop to the web..
I want to open a specific sheet and refresh only said sheet when i open another sheet for example x.xls
So opening x.xls will automatically open y.xls
I've tried this in the workbook code area but it doesn't do anything.
[Code] .....
I have attached the file I am working on. I am attempting to create a link to an external file based on the value of cells in column A. Then I would like to simply copy the formula down, lets say in Column B, the rows and as I do the external file reference will change depending on the value within the cell in Column A. I hope that I am making sense.
I am using Windows Vista with Excel 2007. The files will all be within the same file folder, however, there are hundereds of files so I won't be able to open them all for the indirect to work.
Actually i've downloaded Tracking report of my SPO and this report is on 4-5 csv files (1 file per week). I have to gather data from these 4 files into one Worksheet. I have to do this with command button on my worksheet; with Open file dialogue box (i want to locate the csv files).
CSV files are something like that (I need only first 4 columns):
ABCDE1Name MSISDN Date Location MapLink 2M. Younus Safi "923***550577" "2011-10-07 20:36:18" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 3M. Younus Safi "923***550577" "2011-10-07 19:36:26" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 4M. Younus Safi "923***550577" "2011-10-07 16:39:58" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 5M. Younus Safi "923***550577" "2011-10-07 15:37:23" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 6M. Younus Safi "923***550577" "2011-10-07 14:37:05" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com"
and my Worksheet is like that (With a command Button):
I want to import first 3 columns of csv file on first 3 columns on my worksheet; leave 2 columns blank and then import the 4th column... now for example i have done importing data from 1st csv file and the data is on 50 rows.. i click the command button again, locate the 2nd csv file.. do the same thing (import 1st 3 columns, 2 blank, then 4th) --from 51st Row-- and so on...
ABCDEF1NameMSISDN DatedBlankBlank Location2
3
4
5
6
7
Is it possible to write vba code that will generate a text file with ALL changes that were made to an excel file. Ex. If Cell A17 = "Monday, June 4, 2012" and a user updates Cell A17 to "N/A", I would like to know what the value was before and after the udpate was made.
View 8 Replies View RelatedI have numerous spreadsheets that I need to open and unhide a sheet, that has XML data stored in cell A1. What I need to do is copy that data in cell A1 and paste it into a text document and save that as an XML file saved as the XLS workbook name with a date stamp.
I'm running into many issues, the main issue is the saving as current file name, and the formatting of the text/XML file.
Here is my current code, which doesn't reference the current file name and is just very generic. Once I get the saving as file-name correct and the formatting of the xml file correct, I will work on it a bit more.
Code:
Sub Test()
Dim Rng As Range
Dim wb As Workbook
Set Rng = Range("A1:A2")
Set wb = Workbooks.Add
With wb
Rng.Copy
[code]....
I have an excel template that needs to be copied multiple times and each sheet needs be named according to a list in an excel spread sheet. I also have a formula in the template that needs the value copied instead of the formula.
I got this script from an site and tried it. It runs but I don't see any spread sheets.
strComputer = "."
Set objWMIService = GetObject ("winmgmts:\" & strComputer & "
ootcimv2")
i want to browse a text file with 10 textual lines and rewrite the contents in the same file (starting from line number 11) from bottom to top.
View 9 Replies View RelatedI have a workbook with many spreadsheet named Sheet1, Sheet2 and so on. Each sheet is filled completely upto 65536 rows. This data is being picked up from a CSV file. In this file there are sites with each site there is a assciated set of data. What happens is the data that extracts data does not differntiate between sites and when it reaches to the end of worksheet it splits the data into next sheet. So I am trying to create a macro to check each spreadsheet starting with the last sheet in the work book for example last sheet in the workbook is seven it should go to sheet6 and if there is a blank row after row 64000 it should cut all the rows and move them to sheet7. Then it should goto sheet5 and do the same and keep on doing it until it reaches sheet1.
View 9 Replies View RelatedThis is a sample of the data with which I am working. I know that a macro can do what I need, but I am only versed in Excel formulas and not that much programming. I need to be able to first sort the data by Column C ("Element Type"), then by Columns E, F, G ("Year", "Month", "Day"). Then, I need to be able to copy all rows that have the same "Element Type" and "Year" to a new file, using the same header from the original spreadsheet on each new spreadsheet - doing this multiple times until the end of the file is reached.
Ideally, the new files would have a strict naming convention: XXXXXX-ZZZZ (YYYY).xls, where the X's are the value of the "COOP Station ID" in Column A, the Z's are the "Element Type" from Column C, and the Y's are the "Year" from Column E. If this theoretical macro were run with the Sample Data file I provided, it should result in the creation of five new workbooks. Is there a way to write a macro to do this, or at least something similar
I have a spreadsheet where I want to require certain fields to be completed then I want to have that file auto emailed. I have learned that I do need to have the file saved before sending otherwise the data will not appear in the email, so with this I want to have the file temporarily saved emailed then the temp file deleted.
Here is the code I have so far but it errors on the blue text, I did change the TempFileName from = "Copy of " & wb1.Name & " " & Format(Now, "dd-mmm-yy h-mm-ss") to = [C16] & "_" & [B6] & "_" & [D6]
Private Sub CommandButton1_Click()
If Range("B6").Value = "" Or _
Range("d6").Value = "" Or _
Range("f6").Value = "" Or _
Range("E9").Value = "" Or _
[Code] ......
A co-worker of mine is exporting files from Quickpen as excel files, but every time he names the files with any Uppercase letters in the files name, they are automatically changing to all lower case. Even when he tries to rename the files, they will not stay with any uppercase letters....I have searched all over and cannot find a solution. If he sends ME the file, I can open it in excel and save it with any cases.
View 2 Replies View RelatedI have a macro enabled file with some functions. Now I want to create a fillable pdf file from this file.
I am able to create a pdf file from Excel 2007, but not able to make a fillable one
I have a code in file A that opens several files (B,C,D&E), copies some data from them, then closes the files. That part of the code works fine, but each of the files that are opened (B,C,D,&E) have a Workbook Open event that causes the file to save automatically every 30 seconds. (I know this is not recommended, but this is what the user wants.) The files also have a Workbook Before Close event that is supposed to stop the timer so the file will close without reopening. These each run fine on their own.But if I run code A, the workbook Before Close event in file B (C,D, & E) does not seem to run and the files reopen after 30 seconds to save. When I step through the code it works fine and goes through the Before Close event in each file and the files remain closed.
View 3 Replies View Related
