Im trying to make some code to go through a list of numbers, and pick the next highest number from the one entered in a form. Then I need to do some processing with that number (i need to create a worksheet with that number as the name, and place that number in a few cells on that worksheet, and the main worksheet, but thats all stuff i think i can do).
View 14 RepliesI'm trying to write a vba loop script for a list of numbers. The scrip should do:
1.Check if the numbers identical.
2.If the numbers identical give a serial number that will count the identical numbers.
3.if The numbers do not match, then start a new series of serial numbers counting.
I have the script for the serial number. Script so it will have the conditional part - so the serial number counting will start over when the number in the list changes.
Sub counter()
For i = 1 To Cells(Rows.Count, "B").End(xlUp).Row
If Cells(i, "B").Value "" Then
Cells(i, "A").Value = i - 0
End If
Next i
End Sub
The final result should look like this (the colores are not needed)
I have 10 comboboxes - all require exactly the same list. Rather than having to copy the list 10 times in the coding - and changing the combobox name from listcode1, listcode2 etc, is there a loop code which I can add to do this for me??
Private Sub Userform_Initialize()
'Empty txtdate
txtdate.Value = ""[code].....
If n = 5, then I want to generate a string like this: "1+2+3+4+5". Similarly, if n = 7, I want the string "1+2+3+4+5+6+7".
I can generate the consecutive numbers, but have not figured out how to generate the required string.
I'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
I know ASAP has a feature to do this but I need the code in a bigger macro that I wrote.
EX: -1 needs to be 1
Say column A has either numbers or text in each cell, I need a macro to only get each number in each cell that is not a duplicate of a number in any previous cell and list each number found down column B.
View 5 Replies View RelatedWhat I am trying to do is to loop through ALL 6 number combinations and count how many Odd & Even numbers there are in each of the 6 positions. For example, for number TEN I would like the total combinations where number TEN is Odd in position ONE, then number TEN is Even in position ONE, then number TEN is Odd in position TWO, then number TEN is Even in position TWO etc upto and including where number TEN is Odd in position SIX, then number TEN is Even in position SIX. Obviously number TEN is Even, but out of the TWELVE columns of data for each of the numbers there will be SIX with a figure in it and SIX showing ZERO. Here is the code I have so far but can't quite get it to work.
Code:
Option Explicit
Option Base 1
Sub Odds_and_Evens_by_Position()
[Code]....
I'm looking to do a check on every row after I set an autofilter. Here's a scrubbed version of what I have so far.
Sub test()
max_x = Worksheets("Data").Range("B1048576").End(xlUp).Row
For datarow = 3 To max_x
If Worksheets("Data").Cells(datarow, 4) = "Wire" Then
Worksheets("Data").AutoFilterMode = False
[Code]....
I looked though the site with the search and saw some things that came close, but no cigar.
I have a column of numbers formated in a constant string
eg 1234121231234
The number needs to be formatted into four sections
eg 1234-12-123-1234
I have the code to put the dashes in, but I am looking for the loop statement to take it down column C reading in each number in the 1234121231234 format until the end, and replacing it one by one with the 1234-12-123-1234.
' calls the function to put the dashes in the NSN in the QRL
'First 4 of NSN
first4 = Left(NSN, 4)
'Second2 of NSN
nsn9 = Right(NSN, 9)
For Y = 1 To Len(nsn9)
second2 = Left(nsn9, 2)
Next Y
'Next3 of NSN
nsn7 = Right(NSN, 7)
For Y = 1 To Len(nsn7)
next3 = Left(nsn7, 3)
Next Y
'Last4 of NSN
last4 = Right(NSN, 4)
dash = "-"
NewItem = first4 + dash + second2 + dash + next3 + dash + last4
how do i print this output using VBA ?
Column A
00:00
00:30
01:00
01:30
.
.
.
23:30
I'm trying to create a staff rota which will populate a rota randomly when prompted - I have been trying to find some way of connecting the random lists and the staff names, though this has proved difficult (to say the least!). How best to proceed? I'm also fully aware of the possibility that my present design will also double book people (place then on reception and telephone duty simultaneously).
View 3 Replies View RelatedIs it posible and how to create a list of barcodes from a list of numbers on the worksheet?
Strokescribe seems to have some ind of solution but the data can't come from the worksheet.
Loop with below code. I have the below code:
View 2 Replies View RelatedI just need to get it to loop down to the next row
Sub ConcatenateAll()
Dim x As String, rng As Range, cel As Range
With ActiveSheet
Set rng = .Range("B1:AC1")
For Each cel In rng
x = x & cel.Value
Next
.Range("a1").Value = x
End With
End Sub
Does excel 2013 have a fence way to sort a list of alpha numeric numbers and alphabetize in this order A - Z and then 0 - 9.
Ex) Apple, Greg, Rob, Sand, 123, 126, 1000, 2001
[URL] .... If you take a look at the picture, what I'm trying to do is add the list of Prices up so that I can differentiate the amount received in $ and in £.
I need to add up all the numbers that don't have a $ in front into the 1 cell, and all the ones with the $ in front into another cell.
FEdLkuj.jpg
Is there any script that I generate 6 numbers of these numbers from the list? so they do not recur after another example 7,12,13,19,26,33
View 2 Replies View RelatedI have a UPC list. Some are more than 12 digits, and some with less than 12 digits. I need to make sure there are 12 digits in each UPC. I know how to count using LEN, strip leading zeros of those UPCs that are >12 digits using RIGHT.
What I need now is any number with less than 12 digits, such as 000123, add a 4 to the beginning (4000123) and fill in '0's in between the 4 and the short UPC number to make 12 digits, 400000000123. They vary from 1 to 13 digits.
am looking for a code that uses for loops of any other type of loops to create an array shown below:
1 2 6
6 5 1
2 3 7
7 6 2
3 4 8
8 7 3
5 6 10
10 9 5
6 7 11
11 10 6
7 8 12
12 11 7
The array above represents the node number of the triangles within a rectangle as shown in the image. [URL] .....
A
B
c
d
[Code]....
So the data I put in Is Cells A to D the reast are calculated for me. so for example E2 is looking down column D to see if the number matches the number in A2, If any of them do it will put the name in the corresponding cell in E2 (Or you ca use a different cell if you prefer) so in this case D3=A2 so B3 is the answer also in the cell next to it I need whatever number is the cell next to the answer so in this case C3
1- I have a list full with numbers in a column. And I want to count how many digits are there in every cells. If digit of the number is less than 7, macro will complete it to 7 digits by adding 0 (zero) at the beginning of the number.
Example: A1 = 85468... A1 value is 5 < 7 in this case our number will be 0085468 (total 7 digits)
PS: sometime, when numbers start with 0 (zero), excel delete all 0 value at the beginning of the numbers. Macro should prevent this error.
2- I have another list with 2 columns which arranged in order. I mean:
A1=xx1, B1=xx2, A2=xx3, B2=xx4, A3=xx5, B3=xx6... etc. One is at A column, next number in B column.
My request is I want to make this list 1 column as arranged.
A1=xx1, A2= xx2, A3=xx3, A4=xx4... etc.
3- Macro will add a new line to the end of the above list with this format:
Z00001xxxx
Z00001 is static
xxxx is number of the full cells of A column plus 1. It will be 4 digits. If count is less than 4, it will complete it to 4 digits.
Example: if there are 15 cells in the list, last line will Z00010016 (15 + 1)
I am trying to loop the following code for a total of 15 worksheets without copying and pasting that same code 14 more times for each worksheet. Right now it is only executing the code on the "CAN" tab. Is there a way to make it loop where indicated below?
The 15 worksheets are:
CAN
USA
ASG
Gallia
[Code]......
Code:
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range)
Dim rw As Integer
Dim LastRow As Integer
LastRow = Sheet8.Range("B16:B300").End(xlUp).Row
For rw = 16 To LastRow
[Code] ........
Cannot get the loop to run. I am trying to make it so the loop will stop when it reaches the last non empty cell.
i need a code that can get parameter like a date and put it in a cell in the same column but different rows .
View 8 Replies View RelatedI am trying get a set of code to run through the sheets in the workbook... All sheets EXCEPT 1 named "Summary".
How can I code the proper statement? This is my current
Private Sub cmdAddDistribution_Click()
Dim ws As Worksheet
Dim lCount As Long
Dim rFoundCell As Range
'check for selected cash flow
If Trim(Me.cboxCashFlow.Value) = "" Then
Me.cboxCashFlow.SetFocus
MsgBox "Please select a Cash Flow."
Exit Sub
End If...............
I have a print code that I want to run on a loop. In column A Sheet UPSLabels, I have record numbers 1 through 94.
I have a vlookup in "C1" of another sheet that looks at the record number in "B1" and pulls in the correct information from UPSLabels based off the matchin record number in column A. I would like my code to print, update the number in "B1" by 1, and keep printing the records until it reaches 94.
I've probably supplied too much information, but the point is, I need the loop to run until "B1" reaches 94.
Sub print_loop()
Dim cnt As Range
Set cnt = Range("L1")
ActiveWindow.SelectedSheets.PrintOut Copies:=cnt, Collate:=True
Range("b1") = Range("b1") + 1
End Sub
I am using Excel 2003 work PC, and when i run this simple code it stops during the loop, I have had this problem a bit its like something is hitting the esc key or ctrl - break. But no keys are being hit or are sticking.
I have closed Excel and created new work book pasted the code in but it still stops at r = r - 1, haven't done a restart yet.
Sub Macro2()
Dim r As Integer
r = 10
Do Until r = 0
ActiveCell.Value = ("Shut down in " & r)
Application.Wait Now + TimeValue("0:00:01")
r = r - 1
Loop
Application.Quit
End Sub
How would I shorten this code using a loop and arrays? It is working correctly but needs to be shortened down.
Sub cr()
Dim j
Cells(1, 1).Interior.Color = RGB(250, 155, 100)
j = 0.09
Cells(1, 1).Value = j
Application.Wait Now + TimeValue("00:00:02")
j = 0.094
Cells(1, 1).Value = j
Application.Wait Now + TimeValue("00:00:02")
j = 0.043
Cells(1, 1).Value = j
Application.Wait Now + TimeValue("00:00:02")
j = 0.05
Cells(1, 1).Value = j
Application.Wait Now + TimeValue("00:00:02")
j = 0.034
Cells(1, 1).Value = j
Application.Wait Now + TimeValue("00:00:02")
j = 0.032.........................................
I enter 1 record using the form, the next records does not populated correctly. It looks like the code just keeps looping by ....