I have many wordlists, which have multiple entries in one column. I would like to mark up entires which appear more then once with numbers 1,2,3....The number should be put at the end of the word or ath the beginning.
Before Macro:
Column A
Love
Love
Long
Lonely
Lonely
Living
Living
After running the macro:
Column A
Love 1
Love 2
Long
Lonely 1
Lonely 2
Living 1
Living 2
I am trying to create a column to match duplicate information, primarily numbers, so I can delete the duplicate information. Using the Find option is too time consuming. I am pasteing the new info above the previous weeks info. Some years ago I used a formula that would "Match" a range and I believe it would copy the duplicate in the empty column but it's been so long I am not certain nor do I remeber the formula. I've tried using the filter feature and looked at previous post but I am not familiar enough to know how to decipher the info given.
View 9 Replies View RelatedI have a approx. 70 excel sheets with thousands of entries. Within a single sheet there are some duplicate entries (based on an account number). I find the duplicate entries by using the excel 2007 conditional formating and then sort by color to only show the duplicate entries. There are often hundreds of accounts that are duplicates. Sometimes there are more than 2 identical account duplicates (could be 3,4 or more). In each entry there is a number representing the rating of said account. These numbers differ within the duplicates. Example............
I am trying to find a formula that will choose a "winner" and enter a "W" based on the highest rating within the duplicate entries and then ideally assign an "L" to the loser duplicate account(s). Sometimes there is no rating, other times the rating could be the same in which case any account (does not matter) can be assigned a "W" and the others an "L"
Daily Result
14
10
16
10
5
15
8
12
15
9
I have the formula working for the average of the 4 lowest of all, using "AVERAGE" and "SMALL"; need for average of 4 lowest in most recent 7
I have column A and it has 1000 rows, every row has a number in it, from 5000 to 5200, meaning that some numbers are presented multiple times in column A.
I need to lose repetitions, so every number is in the the table only one time and then I need to convert this one long column into, for example, 9 columns, so there's no wasting of space and have only one column in every page, if printed out.
I have data like this
namefoodripeness
andyorangeC
andyyogurtD
andykiwiE
andystrawberyD
andyyogurtC
andybanannaA
andyorangeB
bobbanannaA
boborangeA
bobstrawberyA
bobkiwiB
bobyogurtC
bobpearC
stevekiwiC
stevebanannaC
steveorangeA
steveyogurtC
and i would like the data to look like this..............
orangeyogurtkiwistrawberyorangepear
andyCDEDC
bobACBC
steveACCA
not sure how to do it.
The code I currently have allows me to search for one text entry in the column and then copy and paste all those entries into the next worksheet. There are 5 different text entries I'd like it to look for but can't figure out how to do it. I have a work around by using wildcards, but then I have to write another macro to delete out the ones I don't want.
Where is says "DNA - weapons", I'd also like it to allow for "DNA - paternity" and a couple other options.
Here is my current code:
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim I As Long
Dim LastCol As String
Application.ScreenUpdating = False
[Code] ....
how to put together a function that will provide for me 1 of 3 results, ( lower than, higher than or similar to). What I would like to do is have a function to have the results for column B, be either "lower than", "higher than" or "similar to" based on column A. Column A will have a range of %'s from -100% to 100%. What I would like happen is the following results for cloumn B, based on column A. If Column A is:
Between -5% and 5% - Then cloumn B = "similar to"
>5% - Then cloumn B = "higher than"
>-5% - Then cloumn B = "lower than"
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
What I need to do is sort certain entries in longer list (column A, it is in .csv format and needs to be in it so coordinates and names and ID, all sorted with commas) and I have another list (column C) which is shorter list of certain IDs. I googled and tried and got some results for the basic structure but the fuction seems to fail. It doesn't matter how I get that third list done, but there is only one criteria: since the list in column A is really long and those entries need to keep the .csv formatting, the function should copy that info what is in the matching cells.
Let me try to put it simple: .csv cells from column A that have matching ID from column C should be copied to column B (or N).
the function I'm working with right now is
=IF(ISERROR(FIND($C:$C; A1))=TRUE;"0";A1)
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
I have the following formula and need to incorporate that it is only a "B" if B20 also matches in named range "Breakdown_RSC"
Formula: ...........
I need the following section to take into account the data in B20 as in if it matches the data in the cell it should be a "B" in the cell.
i have a excel file i need to markup by a 10% value. It is the L column starting at row 2 till a varying number of rows. i need to mark up all of the rows in the spreadsheet. i do not know how to make it repeat.
This is the formula =L2*1.1(i think its the right one) but i do not understand how to make it repeat. any help would be greatly appreciated.
I need the value to be replaced with the marked up value.
I have a macro that's supposed to update the value in column 1 when two conditions are met. Unfortunately it doesn't update the column at all:
Sheets("All_Records").Select
Dim item, rownum, maxrownum As Integer
Application. ScreenUpdating = False
maxrownum = Range("A2000").End(xlUp).Row
For rownum = 2 To maxrownum
If (Cells(rownum, 1).Value = "=") & (Cells(rownum, 29).Value = "OPEN") Then
With Cells(rownum, 1)
.Value = "APPROVED TRIAL"
End With
End If
Next rownum
End Sub
I took the code from another spreadsheet I have where it works fine. But there only one condition has to be met before the field is updated.
I am looking for a way to ease a 24,000 line duplicate list into showing just the files from a specific folder/subfolder and its dupes. I have marked the files that reside in that folder by adding a column and entering a "1" in it. What I am looking for is a way to add that "1" to the others of that unique numerical ID duplicates, so I can sort and trim the list to just those files. End result is to show files in one folder and the locations of duplicates of those files elsewhere for eventual cleanup.
Very loosely, if C2=C1 and B1=1, then make B2=1 (and so on)
(A is blank and only there in case a formula needs input there)
A B C
110121
10121
118134
18134
18134
124232
24232
I have a goal set for the year. With conditional formatting, each month will be set to either red or yellow based on where it stands in relation to the goal. I would also like to show an increase or decrease in productivity for each month. I tried to use conditional formatting with the formula:
=IF(C2=D2, "", IF(C2<D2,"↗","↘")).
The formula works on its own without the conditional formatting so I am not sure what I am doing wrong. I've attached a sample with all the conditional formatting and formulas in place.
I have a list of data and I want to identify the unique entries for both columns but the second column has to unique to the unique values in the first column.
Example List
Fruit
Color
Apple
[Code]....
I need to convert data from column IDS into separate rows, all other columns need to stay in tact. There are several distinct patterns for the IDS column, main identifiers are always starting with FILER or TEAL and the trailing numbers behind it have no more than 6 digits.
BEFORE MACRO
ID
AREA
TYPE
CLASS
QTY
IDS
1
COAL
TYPE9917312
CLASS881345
2
FILER756911**/**FILER123188 ^** FILER877119*118
[Code] ........
AFTER MACRO
ID
AREA
TYPE
CLASS
QTY
IDS
1
COAL
TYPE9917312
CLASS881345
2
FILER756911
[Code] ......
What the MACRO would look like? This is for Excel 2010.
Here is what my worksheets looks like.
54841
54841-1
54841-2
54841-3
55654
58850
58850-1
53254
53254-1
53254-2
56696
56696-3
56696-4
53214
54789
So this list of information needs to be changed to the following
54841
54841-1
54841-2
54841-3
55654
58850
58850-1
53254
53254-1
53254-2
56696
56696-3
56696-4
53214
54789
All the numbers in red need to be cleared. No I have been able to find the original number and clear it. For example I can have the program find 53254 and clear it, but I am really having a tough time having it find -1, -2, -3 and so on. If the program finds a -1, I need any dashes after that to be cleared. If the program doesn't find a -1, then it goes to -2. If it finds a -2 then any number after that needs to be cleared. Here is the code I have to clear some of the numbers.
i have data stored like:
col1
XXXX1244 50
XXXX1519 60
XXXX1244 50
xxxxx1111 10
xxxxx1519 65
the last 4 caracters are numbers. I need to test these numbers and sum the corresponding values them in a single cell without adding new column(SUMIF like).
so in the above example I need to sum all ending at 1244 or 1519, therefore the sum showed in the single cell equals 225
to extract from a single cell: =VALUE(RIGHT(D8;4))
I tried to use an array formula but it seems to crash if a blank cell is in the array
I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows
Example (I have the below in a single Cell as column headers)
NCM Server Mgmt VLAN Site ID
Next Line down is the data (Each row in a single cell)
Enabled 10.10.10.0 50 TEST SITE 1
Enabled 10.10.20.0 50 TEST SITE 2
Disabled 10.10.30.0 50 TEST SITE 3
How I could achieve this as I have a number of projects where this would become useful
I know you can use delimiters but with spaces between the values I just can't fathom a way forward.
I have big library books database file. now i want to re check all the book with physical stock and mark in excel file.
i have one more file with books barcode no.
now i want to mark multiple cell in sheet..
my existing macro, as the run takes to much time to complete. (at least 20min) I've already tried several loops, but no one worked for me. Following situation: There are two excel files, entries in column 73 - 85 will be copied from WorkbookRust to the other workbook if the numer in column 5 is the same. Not every cell within this columns contains data, so the macro should automatically jump to the last entry in each of the above mentioned columns, instead of predefine the range as you see in the code below. After the data is copied to the other workbook, it will be filtered acc. to Sub FilterMain and then copied back to WorkbookRust. As already said, the whole thing works, just to lame.
Sub Allmacros()
Dim WorkbookRust As String
WorkbookRust = ActiveWorkbook.Name
ChDir "C:Documents and Settings vogtMy DocumentsRüstplausch"
Workbooks.Open Filename:= _
"C:Documents and Settings vogtMy DocumentsRüstplauschCH_Revenue_2008.xls"
Sheets("Main_Overview").Select
Windows(WorkbookRust).Activate
Application.run ActiveWorkbook.Name & "!UpdateEntries"
Application.run ActiveWorkbook.Name & "!FilterMain"
'not ask to overwrite existing file
Application.DisplayAlerts = False
Workbooks("CH_Revenue_2008.xls").Save
Workbooks("CH_Revenue_2008.xls").Close
End Sub
Sub UpdateEntries()......................
I have a Listbox that outputs data to Column A. Is there a way to auto populate Column B with 4 items for each Entry in Column A?
The 4 items that will populate in Column B will always be the same.
I have attached an example to better explain what I am trying to describe.
Let's say I have a dataset with blank or X in column A, and a dollar value in column B. I want to sum the dollar amounts for column B only if there is a corresponding X in that row in column A. The way I currently do that is by creating a new column C, making a if statement to display the value of B only if there is an entry in A, and then doing operations on that new range. I figure there has to be an easier way. I don't know how to use VLOOKUP, despite trying to read the helpme a bunch of times. Is that relevant?
View 8 Replies View RelatedI'm trying to identify duplicates with a return of "True" or "False". The attached workbook has column F for results (to read PI2 A if in column L, PI2 B if in column R or Both), but I want to query if everyone in column E is in column L or is in Column R and if so which one.
View 3 Replies View RelatedI have an excel file containing more than 70,000 lines (items and their corresponding orders) and in second file i have all the items listed. I want to find how using excel functions like vlookup i can return all the orders (from first file) against the items (in second file).
Attached a simple example of my problem. Please note that both tables are in different sheets of an file.
ITEMS
ORDERS
A
2
B
3
[Code] .......
I would like to search for numbers and replace them with text (multiple entries).
I tried doing this with vlookup, but for some reasons i dont get the good values.
I've tried to amend the formula's posted above but to no avail so am hoping someone can have a look at the attached.
I would like to be able to use Vlookup or similar to complete a table (starting in cell A19) based on the surname added in B16.
how i can set 'Data Validation' to stop me from entering duplicate values across multiple columns, i can set it for a single column i.e. A1 to A100 but i am after this but for something like A1 to H100.....?
I am currently using this formula in Data Validation:
=COUNTIF($A$1:$A$100,A1)=1
I need something to do this but for multiple columns.