Mark Numbers Between Numeric Range, Above Or Below
May 21, 2008
how to put together a function that will provide for me 1 of 3 results, ( lower than, higher than or similar to). What I would like to do is have a function to have the results for column B, be either "lower than", "higher than" or "similar to" based on column A. Column A will have a range of %'s from -100% to 100%. What I would like happen is the following results for cloumn B, based on column A. If Column A is:
Between -5% and 5% - Then cloumn B = "similar to"
>5% - Then cloumn B = "higher than"
>-5% - Then cloumn B = "lower than"
View 3 Replies
ADVERTISEMENT
Jan 15, 2008
I have several cells that are either positive or negative values and the values are expressed in percentages. I'd like to know how many of the cells are over/under certain percentages. For instance, how many of the cells are over negative or positive 2%? I've tried the COUNTIF function using 2%, 4% and so on, but I always get back the same cell count regardless of the criteria I use.
View 7 Replies
View Related
Mar 31, 2008
I'm trying to add up some values based on a criteria in another column. I have numbers in column A ranging from 0 - 100 and in column B have totals for those numbers. What i am trying to do is Add up the totals in column B based on the following criteria's in Column A.
<7, >7 & <=30, >30 & <=60, >60.
I have a summary page to display the individual results in separate cells.
View 5 Replies
View Related
Aug 29, 2007
i modify the result but the problem is that when i try it the result alway have a higher number i cannot have a low number...
i want to have the reult from 1 to 1899
here is the
Private Sub CommandButton1_Click()
Randomize
TextBox1.Value = Int(Rnd * 1)
TextBox2.Value = Int(Rnd * 9) + 1
TextBox3.Value = Int(Rnd * 9) + 1
TextBox4.Value = Int(Rnd * 9) + 1
End Sub
Private Sub TextBox1_Change()
End Sub
Private Sub TextBox2_Change()
End Sub
Private Sub TextBox3_Change()
End Sub
View 5 Replies
View Related
Apr 8, 2008
In the attached excel file in column C, beginning on row 4, are numbers. These numbers will automatically update on my bloomberg terminal.
(1) I would like to then in column E to have a rating given to those numbers based on the below scale. The way the scale works is that if its 0.6 its a 10. If its anything slightly above 0.6 exactly, its a 9. A 10 is also a 0.5 and any number in between 0.5 and 0.6. The scale is below.
(2) Given that the formula that is being updated is a bloomberg excel formula (in the attached document I pasted it as values), will an excel formula be able to read the updated number in the bloomberg formula? If not, in column D is there a way to have it automatically paste D as values (and update each time column C changes or workbook is saved), and then have column E read off of those numbers.
Scale:
10 = 0.5 to 0.6
9 = 0.6 to 0.7
8 = 0.7 to 0.8
7= 0.8 to 0.9
6 = 0.9 to 1.0
5= 1.0 to 1.1
4= 1.1 to 1.2
3= 1.2 to 1.3
2= 1.3 to 1.4
1= 1.4 to 1.5
0 = anything greater than 1.5
View 5 Replies
View Related
Mar 19, 2008
I would like to " Validate Data In A Vertical Column To Not Allow Non Consecutive Numbers Less Than 100"
756415
10
456132
7
456123
12
The above is a valid list. Below would be an invalid list:
756415
10
13
456132
7
7
456123
12
13
This part of a larger scope, but I have a macro that will crash if the data entered is entered by way of the invalid list, it works perfectly with the valid list. I am limited to one column user's will input the data via a Barcode scanner that after it recieves input it enter's a "Hard" return. This is a warehouse pickticket program, user's scan their ticket id's (numbers greater than 100000) and then the number of lines on the ticket (usually not greater than 15)
View 2 Replies
View Related
Dec 11, 2007
I have many wordlists, which have multiple entries in one column. I would like to mark up entires which appear more then once with numbers 1,2,3....The number should be put at the end of the word or ath the beginning.
Before Macro:
Column A
Love
Love
Long
Lonely
Lonely
Living
Living
After running the macro:
Column A
Love 1
Love 2
Long
Lonely 1
Lonely 2
Living 1
Living 2
View 10 Replies
View Related
Feb 20, 2013
I am extracting data from a website to excel 2010. my problem is the data contains both text, numbers, and sometimes a combination of both.
e.g. hi im ron for more information you can reach me at 6 five 6 four 5 seven 7 three 2 two..
I need it to look like this 6564577322 or 7 * 0 * 2 * 4 * 5 * 6 * 8 * 6 * 2 * 1...i need to look look the same
How do i first format the numbers written in text into numbers and then show only the numbers in a cell minus the text?
View 3 Replies
View Related
Mar 14, 2008
I want to ask that I have got a workbook with different number series i want user form where i can enter its start number and end number and then it finds and delete shift cells up said series number i have entered in user form please see mentioned below example.
Series
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
and i want to delete 1 to 5 numbers delete to shift cells up.
View 9 Replies
View Related
Mar 21, 2008
I have a long list of stock values (col C) arranged in time blocks so;
CREATE TABLES LIKE BELOW?B C M N
19:00 50.00 0 47.1
19:00 51.00 0 47.5
19:00 52.00 1 48.3
19:00 51.00 0 47.3
19:10 36.00 0 45.3 (nb time has changed)
etc
I need a routine that takes the following action;
When the value 1 occurs in col M row .. (it will only occur once in each time block) and N1 on the same row has the highest value [ 1 and 48.3 above] put 1 in column O on the same row else a 0.
If 1 occurs in column N (time block X) and the value in N is not the highest then store a 0.
This needs to be done for each time block.
It feels like this can probably done by an If or vlookup type of routine but I can't come up with one that works across blocks of times.
View 9 Replies
View Related
Mar 2, 2008
I recorded a macro to perform a graphing operation which will be used in a For-Next Loop which will run eight times. I need to modify the “ range” portion of one of the recorded lines to allow the graphing data to be dependent on variables I have set up as integers. See the applicable part of the recorded code below.
Dim firstrowno As Integer
Dim ltcol As Integer
Dim lastrowno As Integer
Dim rtcol As Integer
‘code which sets the values of the above variables Is Not shown
ActiveChart.SetSourceData Source:= Sheets("PLOTS").Range("AN27:AQ33"), PlotBy _
:=xlColumns
How do I replace/modify the ("AN27:AQ33") in the code above using the variable integers; firstrowno, ltcol, lastrowno and rtcol ?
View 5 Replies
View Related
Sep 19, 2005
I have one Row that houses numbers 80-90 in seperate cells (11 columns A20:
K20) - these are my Numeric Labels.
I then have several other Rows that span the same number of columns as the
Numeric Labels (A21:K100) and house Numeric Values that relate to the Numeric
Labels.
I would like to AVERAGE the Numeric Values in each Row and have a Numeric
Label (value) that corresponds to the calculated average returned as the
result.
Example: Sample Data
A20:K20 (Numeric Label) 80 81 82 83 84 85 86 87 88 89 90
A21:K21 (Numeric Value) 07 06 05 03 09 09 00 02 04 12 10
Based on the above data - the Expected Result is 81
Average = 6; Return Numeric Label = 81
The leading zeros shown in A21:K21 is for alignment purposes only.
I would appreciate two formulas:
1) Includes zeros to be averaged
2) Excludes zeros from being averaged
I have tried variations on this =INDEX($A$20:$KJ$20,MATCH(AVERAGE($A21:$K21),
$A21:$K21,0)) but receive the #N/A error message.
View 14 Replies
View Related
Apr 4, 2008
I have a long list of numbers (1 to around 3000) in Column A and I need to print out only the numbers missing from that list. The numbers are sequential (except the ones missing) and there are no blank or missing cells, only missing numbers.
EXAMPLE:
1
2
4
5
7
.....
So I would only need to print the number 3 and 6. - it can be all in one cell, or in one column, it doesnt matter.
View 2 Replies
View Related
Aug 29, 2008
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
View 4 Replies
View Related
Jun 6, 2014
In my spreadsheet, each row of data in Column B starts with 3 numerics (e.g. 001) followed by some text. For example:
Cell B2 contains '001 - Text for this cell'
Cell B3 contains '002 - Different Text for this cell',
Cell B4 contains '003 - Different Text for this cell', etc.
I have hundreds of rows which follow this format.
I have had to insert several rows in my spreadsheet in between existing rows which has thrown off the numbering in the first three positions of my Column B cells.
Is there any way to update the data in Column B so the text data in each cell is retained but the first 3 numeric values are updated and again sequential?
View 3 Replies
View Related
Dec 20, 2007
Can anyone help me to get a validation to check that what is entered in a cell, lets say A1,
has to be number between 100000 and 899999 (this I already have) OR a value/text from I100000 to I899999. So it only acceots a vlaue betwwen 100000 and 899999 and it is also ok to have the letter I at the begining.
View 9 Replies
View Related
Jul 9, 2008
I am using this formula: =INDEX(A5:Z5,MATCH(9.99999999999999E+307,A5:Z5)).
All the cells in the range A5:Z5 contain SUM formulas for adjoining cells in rows 1 to 4. The above INDEX formula doesn't work in this situation because many of the formulas in row 5 return a 0 value because there is no data in rows 1 to 4. If I delete the formula from all these cells, the INDEX function works OK, but I'd rather not do this.
Is it possible to amend this formula so that it returns that last numeric value >0?
View 9 Replies
View Related
Oct 12, 2007
I have been looking for code samples using Find to search for values within or outside a given value range. I haven't come across any that are obvious to me so is it possible?
I am using a piece of code that jindon here on Ozgrid has so kindly been helping me with. The code below searches for a certain value and returns that value when found along with other values. I am trying to adapt this same code to work on other searches I perform.
An example I am looking at is finding any values in column "K" which are either less than 700 or greater than 1300. How would I alter this code to perform a search like that?
Option Explicit
Sub test7()
Dim r As Range, ff As String, txt As String
With Sheets("Sheet1")
Set r = .Columns("av").Find("D00025", , xlValues, xlWhole)
If Not r Is Nothing Then
ff = r.Address
Do
View 9 Replies
View Related
Mar 28, 2007
I am trying to write a macro in excel to clear all cells within a range that are non numeric. I seem to be going round in circles trying to find out how to do this.
I assume I have to use the IsNotNumeric(Target) argument but I can't find how to specify the target within a range.
View 9 Replies
View Related
Nov 4, 2008
If I have the following cells and values
A1 = 0
A2 = 0
A3 = ""
A4 = 0
I want a vba if statement that makes A5 = "Numeric.
If I have:
A1 = 0
A2 = 0
A3 = A
A4 = 0
I want A5 to = "Non Numeric"
Similarly if:
A1 = ""
A2 = ""
A3 = ""
A4 = ""
I want a5 to = "Non Numeric"
Is there a way to do this without looping through each cell in the range?
View 9 Replies
View Related
Apr 13, 2007
I am trying to create a macro that determines if a range I am selecting has any non-numeric fields. If it finds say an cell beginning with a letter a message box appears letting the user know and possibly give the cell and value it found.
View 7 Replies
View Related
Sep 11, 2007
I have around thirty columns I manually search using AutoFilter to find values outside certain ranges. The ranges are different for every column and I copy/paste the out of range values onto another sheet. I am wanting a marco to do this for me.
Here is what I have worked up so far. I thought Select Case would be the easiest to adapt for each column by just changing the values.
Sub ColumnCase()
Sheets("10AL3-27").Select
Range("K1").Select
Selection.Copy
Sheets.Add After:=Sheets(Sheets.Count)
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.Paste
Column K is the first of the columns I sort. The code above seems to be trying to paste the entire column rather than only the cells with values outside the range.
What would be the best way to select the cells which are out of the particular range?
View 9 Replies
View Related
Dec 29, 2007
I am trying to total the number of cells in a column that are 0 or greater but less than 365. I use countif for for a specific digit but cannot compute a conditional range using it. I need to count the number of positive digits btwn 0 and 365. The column is a computation of the difference btwn today and past and future dates. A plus digit means we missed sevice and better be ready for an angry customer.
View 3 Replies
View Related
Jan 10, 2008
Trying to make an excel macro that changes the background of a cell dependant if the value is between one number and another or equal to another number.
Cell values =
a1 = 250
a2 = 475
a3 = 715
vba Example:
Case Is > 200 and < 400
colchoice = 4
Case Is >450 and < 550
colchoice = 5
Case is >600 and <700 or = 715
colchoice = 6
If i run the macro the cell background should be
a1 =4
a2 =5
a3 =6
View 4 Replies
View Related
Jan 19, 2008
I am trying to code a command button to clear a range of cells if any of them contain a numeric value. For example. If any cells of cell range A1:C10 contain a numeric value then they would be cleared. Not all the cells in the range but only thouse contaiing numeric values. I have tried various methods with not-so-good results.
View 9 Replies
View Related
Oct 22, 2009
I am trying to do is extract the volume size of products in 'ml'
from 10k plus products from a description field cell.
this description field could also contain the weight of the product in grams
so I cannot just do a search for a numeric string ,
it has to be associated with the milli-litres statement .
is is possible to do a sort of ' *ml ' search and then select and copy to another cell ???
View 9 Replies
View Related
May 4, 2006
I am trying to figure out a formula that will allow me to compare the
contents of cells within a range and let me know if there is a value that is
not the same as the others. For example:
Columns a,b,c,d,e and f and say "Joe"- this result is acceptable
Columns a,b & c all say "joe" and d,e,&f all say "Mary"- this result is
unacceptable
I want a formula or function that will tell me this wihout me having to
visually scan the data to determine this.
View 9 Replies
View Related
Apr 29, 2014
So I found a great piece of code which calculates relative strength index. However, I've been trying to edit it to make it a bit more dynamic and I'm really struggling to get it to work.
Right now the initial code is:
Code:
Function RSI(MyCells As Range)
Dim up_day, down_day
Dim average_up, average_down
Dim RS, cellcount As Long
Dim cll As Rangeups = 0up_day = 0downs = 0down_day = 0cellcount = 0For Each cll In MyCells
[Code] ..........
Basically I tried to amend this as follows:
Code:
Function RSE(MyCells As Range, Length As Double)Dim up_day, down_day, ups, downs
Dim average_up, average_down
Dim rs, cellcount, rangecount As Long
Dim cll As Range
ups = 0
[Code] ..........
Basically i wanted it to look at the numbers in the range and then error check to see if it was a number... if it was a number great. If not then the length of numbers it should calculate across should increase by 1 as it has to include another number to calc across (hope this makes sense). however, i just cant get it to work at all. My code doesn't seem to make any difference. And it also raises the issue of the fact that the intial value for length also needs to be stored to do the final calc.
View 1 Replies
View Related
Apr 19, 2009
I have a spreadsheet that has (amongst other things) 2 charts based on dynamic data with ranges that redraw using vb... The charts will draw envelopes that correspond to an aircraft's moment or c of g envelope - there will typically be 2 envelopes drawn, "normal" and "utility" or "aerobatic".
Plotted on the charts are an aircraft's takeoff and landing weights and moment/C of G.
I'd like to be able to use a formula or VB to determine which envelope takeoff/landing information falls in (or if it falls outside all envelopes). This data would then be used to generate an error message/possibly also in conditional formatting, etc.
View 4 Replies
View Related
Nov 19, 2009
I have a spreadsheet and I’m trying to create several different staffing scenarios
Basically what I want is to populate column E with the amount of staffing based on the number of classes in column B. The range that I want to apply is in the green box in the sample. I’m trying to have excel give me the staffing value if the current number in cell B5 is a certain value – so in the example 1 through 4 = .2, 5 through 8 = .4 and 9 through 12 = .6. this site gave me some ideas so I tried V lookup and Index but I seem to be missing something and wonder if it is not combinations of nested functions?
View 3 Replies
View Related
