Match The Week
Feb 28, 2008
I have had an attempt at an array formula, which hasn't worked out :/
{=SUM(AND(IF(Data!B4:B107=A16,Data!C4:C107,""),IF(Data!A4:A107=B$12,Data!C4:C107,"")))}
Its because I want 2 different conditions as you can see above, matching both a week, and a season before summing the values. I can get it to work on a week, but then it will add up every matching week in all different seasons, and i can get it to do season, with no week but not both together :f
View 9 Replies
ADVERTISEMENT
Jan 12, 2010
I am trying to produce a excel spreadsheet on Excel 2003 that has sales data. At the end I am to produce where my supervisor can produce a summary of the data showing the last weeks work (and only the last weeks) and how many yes rows there were and how many no rows there were for that week. There is a lot more data involved but the only relevant data for the problem I have is the date and Yes/No fields.
I have looked on other sites and the only thing that I can find that is close is the following formulas.
=COUNTIF(Sheet1!A:A,">"&E1-7)-COUNTIF(Sheet1!A:A,">"&E1)
=SUMIF(Sheet1!A:A,">"&E1-7,Sheet1!C:C)-SUMIF(Sheet1!A:A,">"&E1,Sheet1!C:C)
Apparently these will count the rows and sum them. However they don't differentuate between yes and no. I have attached a very basic spreadsheet with the problem.
View 3 Replies
View Related
Nov 18, 2013
How do I auto fill a series of 2014 dates in the row below the weekdays? I have a row C5 that has a series of auto fill weekdays successfully for 2014. I can't seem to auto fill the weekdates in the row below. I have to make manual adjustments for each Monday, and for the correct month ends, etc.
View 8 Replies
View Related
Jan 19, 2010
I am new to VBA & not sure of the full understanding of code copied from a workbook which worked on the same principle but with Monthly (12) tabs. I thought if modified to show weeks, the macro would be able to locate the current week tab & day/date within - but upon opening, the cell stops at WK19 & column O - rather than WK43, Column N (which changes daily).
Sub Auto_Open()
week(1) = "WK1"
week(2) = "WK2"
week(3) = "WK3"
week(4) = "WK4"
week(5) = "WK5"
week(6) = "WK6"
week(7) = "WK7"
week(8) = "WK8"
week(9) = "WK9"
week(10) = "WK10"
week(11) = "WK11"
week(12) = "WK12"
week(13) = "WK13"
week(14) = "WK14"
week(15) = "WK15"
week(16) = "WK16"
week(17) = "WK17"
week(18) = "WK18"
week(19) = "WK19"
week(20) = "WK20"
week(21) = "WK21"
week(22) = "WK22"
week(23) = "WK23"
week(24) = "WK24"......................................
View 9 Replies
View Related
Dec 11, 2013
I was wondering if there's a way to add a formula to calculate week over week % change automatically every week when I enter in new data. see the attached excel file for reference.
What I would like to have is the ability for the formulas in c5 and f5 to be able to auto-update to the newest week and the previous week's data instead of manually having to update it each week. So if I were to add a new row with data for week beginning 12/2, the formula in c5 and f5 would automatically update to calculate the week over week variance. I tried researching prior to asking the question on this forum, and I think it may be possible to do it using the index match function, but I'm not sure how to apply it in this case.
View 3 Replies
View Related
Aug 6, 2008
I have a comparison model that looks at two weeks of data. I am trying to get around the deletion and insertion of records week on week. With the code below, I can currently find and correct the deletions and insertions to the list, and then resort the list so that the comparison will work.
Sub CheckForNewProjsRemovedProjects()
Dim MyCell As Range, oCell As Range, NewCell As Range
Dim Rng1 As Range
Set Rng1 = Range("A1:A" & Range("A" & Rows.Count).End(xlUp).Row)
' Columns("B:B").Select
Range("B1:B" & Range("B" & Rows.Count).End(xlUp).Row).AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Range( _
"C1"), Unique:=True
For Each oCell In Rng1
For Each MyCell In Range("C1:C" & Range("C" & Rows.Count).End(xlUp).Row)
If MyCell.Value = oCell.Value Then................
View 9 Replies
View Related
Mar 6, 2010
I have a running time sheet daily. It has 2 columns for Labor and 2 columns for travel
i.e. travel From / To 1300-1400 calculate 1 hour then travel home 1600-1700 1 hour this is calculated by the date entry 01/02/10 I have another calculation that tracks by the date i.e. 01/02/10 then Next job which all works fine.
The problem becomes how do I calculate a weekly total labor and travel by the date So added another column called weekly hour’s labor and use the Weeknum to determine which week is which day/date so the first Monday in January 2010 is week 2
2 problems
Having many multiple day / date entries are the same date x 7 days Monday –Sunday
(Relies on the date entered and the weeknum) 01/03/10 each line is complete however the dates carry over as does the time
When trying to calculate each row x 3 same date time then the value will be incorrect I need to calculate
Say 9.5 hour labor from the date 01/03/10 not 28.5 hours and then calculate the total weekly hours
01/03/10, 9.5 hours labor, 3 hours travel
01/03/10, 9.5 hours labor, 3 hours travel
01/03/10, 9.5 hours labor, 3 hours travel
i do have work and travel times for each job on the same line (separate columns) but I display the total here by date to summarize the totals
i have tried sum products and sumif to avail. I am using Windows XP SP2 with MS Office 2007
how do i calculate weekly hours by date and weeknum ?
Total Work per day
Total Travel per day
Daily....................
View 9 Replies
View Related
Jun 16, 2014
I'm trying to write a formula that will tell me when its week one or week two, week three and week 4 based on a given date of any month.
I'm using weekday formula but no luck.
View 6 Replies
View Related
Feb 5, 2009
I have to download a report every week and have been manually checking the report weekly for changes.
View 5 Replies
View Related
Nov 24, 2009
I have a column where I am convering the Date into a Fiscal week number.
For example 10/6/2009 is Work week 41
Now I want to show October Week 41
I need to add the month and the text "Week" before the week number. what is the formula I use.
View 3 Replies
View Related
Oct 14, 2009
I need to copy the values of a range on the weekly sales worksheet to the monthly sales worksheet. The last column is the total on the weekly sales. Part of the heading of the total column is the week ending date (e.g. 10/17/2009. On the Monthly Sales I have the months in columns by week ending (e.g. 10/17/2009).
Range I4:I28 to the monthly sales worksheet by date.
View 10 Replies
View Related
Apr 6, 2007
Is it possible to format cells to convert a date format of month/day/year to = year/week #/day of week? For example, 04/05/07 (April 5, 2007) would read as 7145, (7=last digit of year/ 14 = week number / 5 = day of week....Sunday being the first day of week)
View 9 Replies
View Related
Mar 11, 2014
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))
Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
View 2 Replies
View Related
Oct 8, 2009
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies
View Related
Sep 21, 2013
I have a WB with multiple sheets. I have a Feed sheet that automatically pulls data from the web. I have a Scores sheet that currently has all head to head matchups each week for an entire season. So I want to check the cells on the Feed! sheet to find a partial match and if partial match exists then copy cell that contents score from feed sheet to the score sheet next to the appropriate teams name. Currently I have to manually enter all scores each week for the rest of my WB to update.
I need to look at Cell A3 (on the Feed sheet) which has "New York Jets" then search for a partial/similar match on the score Sheet (which is NY JETS, in this case). NY JETS could be in column B (rangeB2:B257) OR column D (rangeD2:D257) BUT I need to search by row, not column, then once a match is found check the cell to the immediate right and only if the cell is blank copy data from the (!feed) sheet to that blank cell on the (!scores) sheet
This is what happens if working right =
look at cell A3 on the (!feed) sheet = "New York Jets" then search (!scores) sheet Column B and Column D by row for a partial match, finds "NY JETS" as match in cell D8, if cell E8 is blank then copies cell H3 from (!feed) sheet, and pastes to cell E8 on the (!scores) sheet, if cell is not blank continues search until 1st blank cell to the right of matching cell is found (as there will be mutiple matching cells with blank cells to the right but I am only interested in the 1st blank cell found, once found and data copied the process is done and then starts over with cell A4)
Look at cell A4 (!feed)= "New England Patriots" then search (!scores) sheet Column B and Column D by row, finds "NEW ENGLAND" as match in cell B8, if cell C8 is blank then copies cell H4 (!feed) sheet, and paste to cell C8 (!scores)
Once this is done it moves on to the next cell in the next row on the (!feed) sheet, A5, to find a partial match for the data in that cell. I need to continue the search for each cell A3 to A74, and if no match is found to move on to the next cell A6... (based on the way the data is pulled in from the web there are some blank cells as well as some cells that say Game Final, this data won't be on the scores sheets in column B or D).
View 1 Replies
View Related
May 23, 2014
We know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
View 5 Replies
View Related
Jan 21, 2014
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
View 3 Replies
View Related
Feb 5, 2014
In sheet 1, I have
Col A Col B
John Sedgwy - R
In sheet 2, I have the following names
Col A Col B
Peter Walker
John Sedgwicky
When I did an array match -> ={MATCH(1,(TRIM($a2)=Sheet2!$A$1:$A$2)*(left(b2,5)&"*"=Sheet2!$b$1:$b$2),0)}
gave me an error but when I did an individual match to both John and Sedgw, it works.
View 4 Replies
View Related
Dec 15, 2013
[URL]
What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.
View 9 Replies
View Related
Feb 4, 2014
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
View 3 Replies
View Related
Jul 13, 2009
I need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
View 6 Replies
View Related
Jun 2, 2012
I am very new withe macro I recieve every day a CSV file from our supplier withe a list of the products that got updated withe new price, stock count, product ID etc.
I have my own worksheet with the product ID that we use, and I want to finde the exact match to my product ID in that CSV file and delete all other that don't match.
But i need them get deletede by rows thos product ID that dosen't match to my workbook.
I tried with this, so it could set an X in front of my match then i could filter and copy it to my workbook but it dosen't work:
Because the same product ID is sometime in 100 rows and the X come only in front of one of them.
=IF(ISNA(MATCH(Q2:Q1000;G$2:G$1000;0));"";"X")
so with some macro. I need to have every row deleted that don't match to my list of product ID.
View 5 Replies
View Related
Aug 28, 2012
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
View 5 Replies
View Related
Jul 11, 2008
INDEX/MATCH multiple ocurence match values needed
View 9 Replies
View Related
Jan 30, 2008
I have 2 worksheets named sheet1 and need_to_delete that are in the same format: 7 digit number, 5 digit alpha numeric, text, dollar amount. I need to copy every row into sheet2 where there are no matches in the column A of the two source worksheets, and copy every row that does have a match in column A into sheet 3. I also need to keep the rows in their current order.
View 5 Replies
View Related
Jun 21, 2006
How can i find the first day of a week
I have the week number and i need the date of monday of that week
Ex: Week number:24
First day of week(Monday):12-06-2006
View 5 Replies
View Related
Jun 27, 2006
I need the name of the day of the week from a date that has to be put together. This is going into a label on a UserForm.
I have a named range called wbDate. It is the month & year. The day of the month is the value of a TextBox (TBDay) on a UserForm. When I tried to combine these items, I used this
vToday = Month("wbDate") & " " & TBDay.Value & ", " & Year("wbDate")
vToday is dimmed as variant.
I am getting a type mismatch error and I'm not sure how to correct it.
What I am aiming for eventually, is the name of the day of the week.
View 4 Replies
View Related
Jul 10, 2013
I am trying to identify matches for company names I have in columns A and H.
I originally used =IF( $A3<>$H3,"No Match","Match")
The issue is that not all of the company names in column A contain "INC","LLC", "CORP", etc. So, I am not capturing all of the matches.
Example:
Column A: American Eagle Outfitters
Column H: American Eagle Outfitters INC
Is it possible to write a formula with the logic that IF A3 and H3 both contain "American Eagle Outfitter" then "Match" or "No Match"?
View 1 Replies
View Related
Jun 10, 2009
Is it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.
View 10 Replies
View Related
Jan 15, 2013
I couldn't resolve the formula of Index-Match for getting the values that matches the following criteria
1) Match the "Category" of Table 1 to Table 2
2) Match the "value" of Table 1 to Table 2, if value is not present in Table 2 take the upper closest value.
Once the above conditions are met, Take the Result from Table 2
Table 1 is for Input and Table 2 is for Database.
Please note that Data in Table 2 should not be sorted in any way. I tried to use the -1 option of the Match function for upper closest value but it didn't work out.
Have a look at the file attached : IndexMatchUpperClosestValue_AlongwithExactMatch.xlsx
View 3 Replies
View Related