I want to update a cell when 1 column matches another column.
this is my data
AB CD EF
IDtemp1 temp2ID2 NetinvNetWrit
1$0.00 $19,745.933$1,907.60$29,495.27
2 8$0.00$60,099.38
3$1,907.60 $29,495.271$0.00$19,745.93
4 6$0.00$31,233.28
I want column B and C to populate with E and F if ID = ID2 or column A = Column D
How to match one cell against multiple columns.
I have numbers in columns a through cc and cannot put them in descending order. I am using this formula:
=match(CF1,A10:A1008,0) I have to use a new cell and type the same formula =match(CF1,B10:B1008,0) then again =match(CF1,C10:C1008,0) I AM RUNNING OUT OF ROOM! Is there anyway to search all columns =match(CF1,A10:CC1008,0) ?? This formula doesn't work when I type it in.
I have tried shift control enter for an array and still no go.
I have tried vlookup
I have tried Index
I have tried Iferror
I have tried isna
I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
programming 2 macros in a bank reconciliation sheet I am trying to create.
Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.
The following two situations can occur and which need to be covered with a macro.
Many to one matching
When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an ‘x’ next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.
Partial cell matching
In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say ‘Brown Corp.’ and the bank side might say ‘Brown Corporation’. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a ‘x’ to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.
Let's say that in column A I have numbers,"Yes" and "No". I want in column B to have only the numbers from column A, in the same order without any empty ranges, and everytime I add in column A a new number, column B to update automatically with that number. Let's have an example:
A B
Yes 12
12 13
No 10
13
No
10
Yes
And if I want to add in column A:
A B
Yes 12
12 13
No 10
13 25
No 15
10
Yes
25
15
So the column be will update automatically. I already tried =IFERROR(INDEX($A$1:$A$10,SMALL(IF(ISNUMBER($A$1:$A$10),ROW($A$1:$A$10)),ROWS(B$1:B1))-ROW($A$1)+1),") but using this many times get's my file very heavy and the excel is working slow.
I want the script to find if the value entered in the form is matching the values in column 'A' in the database and if it matches then it needs to select the cell as active cell - to populate the form details. And if there is no matching value found, the script needs to select the last empty cell of the column 'A' to populate the data entered in the form.
1) Form has 10 different fields that needs to be filled by the user.
2) Field 1 - is a text box for 'Request #' to be entered by the user.
3) After filling in all the fields - once clicked on OK, the form should search for the the 'request #' entered on the form in the database (Form and the database are in the same workbook).
4) If the 'Reqeust #' in the Column 'A' matches the the 'Request #' entered in the form, then the matching cell should be selected (Activecell -Were the data can be overwritten, with the new entry)
5)If there is no matching 'Request #' found in the database, the script should loop to select the next available blank cell in column 'A'. So that the form data can be entered.
i need to match 2 columns on one worksheet with 2 columns on another.
One column is alphanumerical (Reference Numbers), the other is company names.
I need to ensure that both the Reference and Company name match from one sheet, with the company and reference from another.
e.g if A1 and B1 on Wks 1 = A1 and B1 on Wks 2 = TRUE, anything else is FALSE.
There is likely to be Reference number and Comapny name duplicates, therefore the trick is to ensure that the number of duplicates match?(I.E ABC Company, Reference number 1234 may appear 5 times on worksheet 1, however if it is only on Worksheet 2 4 times, then this must be flagged).
I want to add these numbered steps onto the macro I already have, which I pasted below.
1. Starting in Row 2 in the worksheet named Report 1 look at contents in Column A then look at the contents in Column C, if the contents in Column C do not match exactly the contents in Column A then copy the contents in the range column C:E from that row till the last row in Column C:E.
2. Now we will have a range that is made up of cells from C:E. I would like to move that range down a row at a time, until the first cell in Column C from the range Column C:E matches exactly the contents in Column A. Then I would like to continue this pattern for every row in the worksheet.
I have two spreadsheets, both contain matchable data. First one with amounts. Next one hs customer name, period and amount columns.
View 3 Replies View RelatedI need to match the first column with the second column, and if is the same value, copy the value in third column to the forth column.
View 1 Replies View RelatedI have a basic formula =C17+'Asset Depreciation 2008 Onwards'!C24, and I want to copy it down just using the drag function. Problem is that the second reference range of cells are in rows and hence when I copy it down it doesn’t automatically update the cell references because it want to update them by column number instead of row number. IE I want it to display =C17+'Asset Depreciation 2008 Onwards'!
D24, instead of C25. Do you know if there is any way of telling Excel that I want it to increase the column number by 1 every time, instead of the row number for this part of the formula?
I have two worksheets, sheet 1 and sheet 2. On sheet 1, I have a information on two columns (Column A and B) Column a has information up to row 10 (aaa, bbb, ccc, ddd, ...). On column B, I have 111, 222, 333 . I have same information on Sheet 2. However, sheet two has an additional column (Column C) with 10 rows on information z, y, x, w, v ...
What I need to do is to match column A and B in sheet 1 to column A and B in sheet 2 and if both columns matches on the same row, copy the value in sheet 2, column C and paste it on sheet 1 column C.
Important: Information on sheet 2, column B may be twisted (As they may not appear exactly the same as in sheet 1. Which means 111,222,333 can be 222,333,111 along the column). Therefore, need to match the entire range.
I need creating a formula that matches the values between two separate columns with results from that matching in the third and fourth columns.
Example: Column A contains the first set of values and column B contains the second set of values. The result in column C would be all the values that are in both columns A and B and the result in column D are all the values that are not found in both columns A and B.
Column AColumn BColumn CColumn D
122123123122
123133322133
231221323221
311322231
322323311
323333333
See attached spreadsheet : match_values.xlsx‎
Alright, so I need data in column A(Last names) and data in column B(First name) to match their respective names on another sheet. When a match is made, it will return column C(Hours worked).
I originally used Vlookup to match last names, something akin to =VLOOKUP(A:A,Week1!A:P,4,FALSE)
But this does not account for employees that may have the same last names. Is there a way to combine two vlookup's? Or is Index a possible solution?
I have two columns listing about 400 and 500 names respectively.
First Column has names in alphabetical order and the second column is random.
One column has names in this format: Last name, First name and the other column lists the names as first name and then last name without the comma .
I am trying to see if the list of names in one column exists in the other.
Is there a way to see this without changing the format of the names in each column? If so do I have to erase the comma?
Name Lists (1).xlsx
I am trying to 'stagger sort' multiple columns, but am having some difficulties.Ex.
Say A and B are lists of part no and C is data corresponding to column B. I have:
A B C
1 2 .
2 3 ,
4 4 ;
5 7 '
8 9 "
I want:
A B C
1 _ _
2 2 .
_ 3 ,
4 4 ;
5 _ _
_ 7 '
8 _ _
_ 9 "
(the _ are just supposed to be empty place holders, without them I have formatting issues)
Is there a 'quick' way to sort them this way?I am attaching the actual file that I am working with.
My requirement is to match 2 columns of two different sheets. I know about Vlookup for exact matching but here I neeed to do partial matching.
For Example: Sheet1 Company Name= Opera Technologies
Sheet1 Address= 104/Main Street
Sheet2 Company Name= Opera
Output should be like this in different column: Opera, 104/Main Street
I have 2 columns of data. Both should ultimately have identical data,
but both have extranious data I need to separate. These lists will be
300+ long, so by hand is taking forever. Example:
Column A Column B
12345 12344
12346 12345
12347 12346
12348 12347
12349 12349
I need a way to extract the 12344 from column B since it is not in A,
and 12348 from A since it is not in B. They do not have the same number
of entries.
I have a problem in my list cheking. I have two sheets in my attached excel file. I have mordified for my own job security purpose. I need to check the individual cells of "parent" column in "Missing Asset" with "parent" column of "Asset" worksheet. It means, presence of cell text of A2 of "Missing Asst" sheet has to be checked with "A" Column of "Asset" sheet. If A2 text is present in "A" Column of "asset" sheet then "Y" should appear in B2 cell of "Missing Asset" sheet. Else "N". Its just Column text checking wothin two work sheet & then identify the cell which is not match. I guess "VLOOK" can work. Is it not?
View 3 Replies View Relatedi am using this spreadsheet to monitor when equipment is being borrowed in the office and want a quick view reference (columns A-C) based on the data entry in columns &G. Please note that htis is an example as the original file is confidential, if someone can answer my query here i will transfer the formula to my actual workbook. In the actual workbook the data entry and quick view will be on different sheets if this makes a difference.
View 3 Replies View RelatedIn Col A, from A1:A12 I have
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
In column G from A1:A6, I have
6
9
7
11
15
How could I return an 'x' in column C against the A values corresponding with the G values, for example an 'x' in C6, an 'x' in C9, an 'x' in c15' etc? And a blank for example at C8 and C14.
I have the following columns (O & S):
S O
-----
1 3
3 7
6 6
8 4
1 3
2 8
1 6
I want a code (Formula) do the follwoing: Matching number 1 in column S with number 3 in Column O and count how many matches found in the two columns, Which in this case only two.
I have a document where there are hundreds of rows and columns. The rows contain lines of data, while the columns are topics. Each row needs to be traced to an appropriate column. Once traced, I simply check off the appropriate cell with an X. I have to make sure that each row has at least one "X".
I have attached a sample file. look at cell B8. The statement in this row reads "Issue Placard information and registration". Now, I already know what column this statement belongs to (column CT).... but I don't want to scroll over hundreds of columns to that particular column, or have to freeze any panes, to locate that cell and mark it off. I have been doing this manually and it is incredibly tedious and time-consuming. Is there a way where I can locate the appropriate cell and go to it without having to scroll? When I'm scrolling I have to not only scroll, but I have to read the rows and columns again to make sure they indeed match. I want to be able to locate the right cell instantaneously and just enter an X value.
I have a document where there are hundreds of rows and columns. The rows contain lines of data, while the columns are topics. Each row needs to be traced to an appropriate column. Once traced, I simply check off the appropriate cell with an X. I have to make sure that each row has at least one "X".
I have attached a sample file. look at cell B8. The statement in this row reads "Issue Placard information and registration". Now, I already know what column this statement belongs to (column CT).... but I don't want to scroll over hundreds of columns to that particular column, or have to freeze any panes, to locate that cell and mark it off. I have been doing this manually and it is incredibly tedious and time-consuming. Is there a way where I can locate the appropriate cell and go to it without having to scroll? When I'm scrolling I have to not only scroll, but I have to read the rows and columns again to make sure they indeed match. I want to be able to locate the right cell instantaneously and just enter an X value.
I have a list of names in a column and another list of names in another column. The columns are named patient and user. Is there a way to right a formula that would highlight a name match when a name matched in the two columns in the same row?
View 9 Replies View RelatedI have two columns of data, in A and B. Column A has about 500 rows of numbers, while column B only has about 150. All the numbers that are in column B exist in column A.
(Column B is a monthly product production list, while column A is a "master list" of all products that can be produced)
I need someway to match the data in Column B with Column A so they line up.
I was thinking something like this, but don't know how to do it:
"Where value in column A = value in column B, then copy this data into cells D1 and E1" (so the values line up next to each other)
is this possible? Maybe with some advanced filter? Or a macro? It seems kind of silly, but I just need to have the data next to each other without doing it manually.
I have 2 columns of text A & C and I want to find any text in C where the entry is matched in A, and then have the text entered into column B next to the match found in column A. As always an example as my explanations are usually poor.
View 2 Replies View RelatedI have two worksheets and I want to match two columns from each worksheet and return me a respond with "yes" or "no" For example:
Sheet 1
Name Item
ABC 123
DEF 456
GHI 789
Sheet 2
Name Item
ABC 123
DEF 789
GHI 134
So, I want to search the "name" column in Sheet 1 with Sheet 2, if they found the name is matching, then search for "item" column in sheet 1 with the "item" in sheet 2. If they both match, I want to return with a "yes" if not return value "no" in a different column #3.
I tried to do it, but it keeps on finding "789" in column 1 with "789" in column even though the name is different, it still return me a value of "yes."
I receive hundreds of excels which I combine into one sheet for input into a program (which I don't know much about). The combined sheet contains 2 columns repeated with different information. For instance Column A is Category, Column B is Dollar Amount, Column C is Category,
Column D is Dollar Amount and so on.
I then start with Column A and compare it to Column C to make sure the categories match. If C is a new category (not listed in Column A) I shift columns A and B down one and add the new category to Column A. This updates my master list in column A but also maintain the format and correct dollar amount that was listed in Column B. Then I move to Column E and compare it to A using the same logic.
I repeat this process throughout hundreds of columns. I then delete all the category columns and am left with Column A as a master category list and all the dollar amounts in the correct location for all excels that have been sent in. I'm hoping someone here knows a faster way for me to do
this using VB or VBA for Excel or a Macro. I've tried a few things I've found on these forums to no avail, and I'm not an expert when it comes to this. This currently takes me days to complete, and I know it should not take this long. Please save my sanity!
I have 2 columns worth of data (ie: B and C). I want to see if there are matches AND if there are matches, I want another column's data to be shown (ie: A).
Columns B and C are peoples names and column A are employee numbers. Sat around bouncing ideas off coworkers and we could not figure anything out.
