I have 2 columns worth of data (ie: B and C). I want to see if there are matches AND if there are matches, I want another column's data to be shown (ie: A).
Columns B and C are peoples names and column A are employee numbers. Sat around bouncing ideas off coworkers and we could not figure anything out.
I am trying to match headers of different files and copy data.If the one of the header is not matched then a new column with the non matching header should be created and the column has to be copied
Ex: file1.xlsx has AA BB CC as header
file2.xlsx has AA BB DD EE as header
file3.xlsx should contain AA BB CC DD EE i.e data from file1.xlsx and file2.xlsx
I have more than 300 files how can I copy all the files to one excel file by matching headers ?
I need to compare column A of Original.test worksheet to column A of Supplier.test worksheet. If there is a match then copy entire row of the corresponding match from Original.test to Matched worksheet. If no match then copy that row into OnlyInOriginal worksheet.
I have included the workbook and what the output should be. Hope it makes sense. ozgrid.xlsx
I've tried searching for an answer all over with out success. Here's my dilemma. I've got two columns (A and B) with over 1000 entries in each column with computer names. Most of the names are the same however some differ in the way that they might be in column A and not in column B and vice versa. What I would like to achieve is to compare those two columns and display the result in column C and D but keep the names of the in the retrospective column.
What I mean by that is that if a name was found in A but not in B I would like to have it displayed in column D and vice versa. If a name is found in B but not in A, to have it displayed in column C. If there is an easier of doing this, please by all means (i.e. highlight the name in A if missing in B and vice versa).
I have 3 times series data in excel (returns on stock, market return and risk free return), each has their own date corresponding to its return, so 6 columns all up.
Imagine it like this:
Date | Stock Return -- Date | Market Return -- Date | Risk Free Return
The problem is that the 3rd data set (risk free return), its date column mismatch the dates column of the first two (returns on stock and market). So the obviously solution is to basically get the third time series data to only show the same dates as the first two.
I want to use the first two data sets date's as like a benchmark for the third data set to only show those dates.
I have tried filter/advanced filter in Excel 2007 and spent ages on google/youtube but no luck; it wont let me try to match specific cells to filter out dates from a specific series of cells.
I'm not sure whether this should be a general question or it should go in the programming section... but here here goes anyways
I need to create a spreadsheet where the contents of Col A & B in Sheet1 are copied into both Col A & B in Sheet2 & Sheet3. Sheet1 Col A&B will be continuously updated (rows will be added) and as these columns are updated, Col A & B in Sheet2 & Sheet3 should be updated automatically and keep the format that is set in Col A & B in Sheet1.
Now, Col C&D in Sheet2 & 3 will be updated by a different user. As the user updates the cells in Col C&D in Sheet2 & 3, Col C&D in Sheet1 should automatically be updated with the data in the cells of Col C&D in Sheet2 (and keep the format) and Col E&F in Sheet1 should automatically be updated with the data in the cells of Col C&D in Sheet3 (and keep the format).
I have a drop down list, using data validation, calling from a range name on a different sheet($1). Works great. I see my list of choices.
What I want to do next is for another named range on another sheet($2) to be called when I select one of the options from the drop down.
So say the drop down is in I71, when I pick an option from that list it will populate (B72, B73:G73, B74:G74...etc...) from a named range I have already defined on ($2).
Where would I put the (if I71=Range1, then paste this info into the (B72, B73:G73, B74:G74...etc...) on $1 ?
i need to match 2 columns on one worksheet with 2 columns on another.
One column is alphanumerical (Reference Numbers), the other is company names.
I need to ensure that both the Reference and Company name match from one sheet, with the company and reference from another.
e.g if A1 and B1 on Wks 1 = A1 and B1 on Wks 2 = TRUE, anything else is FALSE.
There is likely to be Reference number and Comapny name duplicates, therefore the trick is to ensure that the number of duplicates match?(I.E ABC Company, Reference number 1234 may appear 5 times on worksheet 1, however if it is only on Worksheet 2 4 times, then this must be flagged).
I want to add these numbered steps onto the macro I already have, which I pasted below.
1. Starting in Row 2 in the worksheet named Report 1 look at contents in Column A then look at the contents in Column C, if the contents in Column C do not match exactly the contents in Column A then copy the contents in the range column C:E from that row till the last row in Column C:E.
2. Now we will have a range that is made up of cells from C:E. I would like to move that range down a row at a time, until the first cell in Column C from the range Column C:E matches exactly the contents in Column A. Then I would like to continue this pattern for every row in the worksheet.
I have two spreadsheets, both contain matchable data. First one with amounts. Next one hs customer name, period and amount columns.
View 3 Replies View RelatedI need to match the first column with the second column, and if is the same value, copy the value in third column to the forth column.
View 1 Replies View RelatedI have two worksheets, sheet 1 and sheet 2. On sheet 1, I have a information on two columns (Column A and B) Column a has information up to row 10 (aaa, bbb, ccc, ddd, ...). On column B, I have 111, 222, 333 . I have same information on Sheet 2. However, sheet two has an additional column (Column C) with 10 rows on information z, y, x, w, v ...
What I need to do is to match column A and B in sheet 1 to column A and B in sheet 2 and if both columns matches on the same row, copy the value in sheet 2, column C and paste it on sheet 1 column C.
Important: Information on sheet 2, column B may be twisted (As they may not appear exactly the same as in sheet 1. Which means 111,222,333 can be 222,333,111 along the column). Therefore, need to match the entire range.
I need creating a formula that matches the values between two separate columns with results from that matching in the third and fourth columns.
Example: Column A contains the first set of values and column B contains the second set of values. The result in column C would be all the values that are in both columns A and B and the result in column D are all the values that are not found in both columns A and B.
Column AColumn BColumn CColumn D
122123123122
123133322133
231221323221
311322231
322323311
323333333
See attached spreadsheet : match_values.xlsx
Alright, so I need data in column A(Last names) and data in column B(First name) to match their respective names on another sheet. When a match is made, it will return column C(Hours worked).
I originally used Vlookup to match last names, something akin to =VLOOKUP(A:A,Week1!A:P,4,FALSE)
But this does not account for employees that may have the same last names. Is there a way to combine two vlookup's? Or is Index a possible solution?
I have two columns listing about 400 and 500 names respectively.
First Column has names in alphabetical order and the second column is random.
One column has names in this format: Last name, First name and the other column lists the names as first name and then last name without the comma .
I am trying to see if the list of names in one column exists in the other.
Is there a way to see this without changing the format of the names in each column? If so do I have to erase the comma?
Name Lists (1).xlsx
I am trying to 'stagger sort' multiple columns, but am having some difficulties.Ex.
Say A and B are lists of part no and C is data corresponding to column B. I have:
A B C
1 2 .
2 3 ,
4 4 ;
5 7 '
8 9 "
I want:
A B C
1 _ _
2 2 .
_ 3 ,
4 4 ;
5 _ _
_ 7 '
8 _ _
_ 9 "
(the _ are just supposed to be empty place holders, without them I have formatting issues)
Is there a 'quick' way to sort them this way?I am attaching the actual file that I am working with.
My requirement is to match 2 columns of two different sheets. I know about Vlookup for exact matching but here I neeed to do partial matching.
For Example: Sheet1 Company Name= Opera Technologies
Sheet1 Address= 104/Main Street
Sheet2 Company Name= Opera
Output should be like this in different column: Opera, 104/Main Street
I have 2 columns of data. Both should ultimately have identical data,
but both have extranious data I need to separate. These lists will be
300+ long, so by hand is taking forever. Example:
Column A Column B
12345 12344
12346 12345
12347 12346
12348 12347
12349 12349
I need a way to extract the 12344 from column B since it is not in A,
and 12348 from A since it is not in B. They do not have the same number
of entries.
I have a problem in my list cheking. I have two sheets in my attached excel file. I have mordified for my own job security purpose. I need to check the individual cells of "parent" column in "Missing Asset" with "parent" column of "Asset" worksheet. It means, presence of cell text of A2 of "Missing Asst" sheet has to be checked with "A" Column of "Asset" sheet. If A2 text is present in "A" Column of "asset" sheet then "Y" should appear in B2 cell of "Missing Asset" sheet. Else "N". Its just Column text checking wothin two work sheet & then identify the cell which is not match. I guess "VLOOK" can work. Is it not?
View 3 Replies View Relatedi am using this spreadsheet to monitor when equipment is being borrowed in the office and want a quick view reference (columns A-C) based on the data entry in columns &G. Please note that htis is an example as the original file is confidential, if someone can answer my query here i will transfer the formula to my actual workbook. In the actual workbook the data entry and quick view will be on different sheets if this makes a difference.
View 3 Replies View RelatedIn Col A, from A1:A12 I have
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
In column G from A1:A6, I have
6
9
7
11
15
How could I return an 'x' in column C against the A values corresponding with the G values, for example an 'x' in C6, an 'x' in C9, an 'x' in c15' etc? And a blank for example at C8 and C14.
I have the following columns (O & S):
S O
-----
1 3
3 7
6 6
8 4
1 3
2 8
1 6
I want a code (Formula) do the follwoing: Matching number 1 in column S with number 3 in Column O and count how many matches found in the two columns, Which in this case only two.
I have a document where there are hundreds of rows and columns. The rows contain lines of data, while the columns are topics. Each row needs to be traced to an appropriate column. Once traced, I simply check off the appropriate cell with an X. I have to make sure that each row has at least one "X".
I have attached a sample file. look at cell B8. The statement in this row reads "Issue Placard information and registration". Now, I already know what column this statement belongs to (column CT).... but I don't want to scroll over hundreds of columns to that particular column, or have to freeze any panes, to locate that cell and mark it off. I have been doing this manually and it is incredibly tedious and time-consuming. Is there a way where I can locate the appropriate cell and go to it without having to scroll? When I'm scrolling I have to not only scroll, but I have to read the rows and columns again to make sure they indeed match. I want to be able to locate the right cell instantaneously and just enter an X value.
I have a document where there are hundreds of rows and columns. The rows contain lines of data, while the columns are topics. Each row needs to be traced to an appropriate column. Once traced, I simply check off the appropriate cell with an X. I have to make sure that each row has at least one "X".
I have attached a sample file. look at cell B8. The statement in this row reads "Issue Placard information and registration". Now, I already know what column this statement belongs to (column CT).... but I don't want to scroll over hundreds of columns to that particular column, or have to freeze any panes, to locate that cell and mark it off. I have been doing this manually and it is incredibly tedious and time-consuming. Is there a way where I can locate the appropriate cell and go to it without having to scroll? When I'm scrolling I have to not only scroll, but I have to read the rows and columns again to make sure they indeed match. I want to be able to locate the right cell instantaneously and just enter an X value.
I have a list of names in a column and another list of names in another column. The columns are named patient and user. Is there a way to right a formula that would highlight a name match when a name matched in the two columns in the same row?
View 9 Replies View RelatedI have two columns of data, in A and B. Column A has about 500 rows of numbers, while column B only has about 150. All the numbers that are in column B exist in column A.
(Column B is a monthly product production list, while column A is a "master list" of all products that can be produced)
I need someway to match the data in Column B with Column A so they line up.
I was thinking something like this, but don't know how to do it:
"Where value in column A = value in column B, then copy this data into cells D1 and E1" (so the values line up next to each other)
is this possible? Maybe with some advanced filter? Or a macro? It seems kind of silly, but I just need to have the data next to each other without doing it manually.
I have 2 columns of text A & C and I want to find any text in C where the entry is matched in A, and then have the text entered into column B next to the match found in column A. As always an example as my explanations are usually poor.
View 2 Replies View RelatedI have two worksheets and I want to match two columns from each worksheet and return me a respond with "yes" or "no" For example:
Sheet 1
Name Item
ABC 123
DEF 456
GHI 789
Sheet 2
Name Item
ABC 123
DEF 789
GHI 134
So, I want to search the "name" column in Sheet 1 with Sheet 2, if they found the name is matching, then search for "item" column in sheet 1 with the "item" in sheet 2. If they both match, I want to return with a "yes" if not return value "no" in a different column #3.
I tried to do it, but it keeps on finding "789" in column 1 with "789" in column even though the name is different, it still return me a value of "yes."
I'm trying to have a cell where I return the minimum value of column A but only when column B equals 380 and when C equals 80. I know how to do it if I select my range manually to be the range including all the 380's and 80's but I'd like to select the entire data set to look through so that I can easily change the criteria to say finding the minimum in Column A when B equals 420 and C equals 40.
View 6 Replies View RelatedHow to match one cell against multiple columns.
I have numbers in columns a through cc and cannot put them in descending order. I am using this formula:
=match(CF1,A10:A1008,0) I have to use a new cell and type the same formula =match(CF1,B10:B1008,0) then again =match(CF1,C10:C1008,0) I AM RUNNING OUT OF ROOM! Is there anyway to search all columns =match(CF1,A10:CC1008,0) ?? This formula doesn't work when I type it in.
I have tried shift control enter for an array and still no go.
I have tried vlookup
I have tried Index
I have tried Iferror
I have tried isna