Move Only Value Producing Formula To Another Column ??
Dec 24, 2008
s/s is very large and the need is to transfer formulas from one column to another. Column L contains formulas in cells L7:L45 (attachment) - (L7:L326415 in working s/s). Some of these formulas result in a value being given. I need to transfer formulas only from those cells having values to cells three columns to the left on the same row. I do have code which I was using for another application. This puts a formula in the correct places but it is the wrong formula and I don't know how to amend it so that it carries out the required action. Small attachment enclosed for better understanding of what is involved. Or could anyone change the line ".formula = ......" in the following code to make it work??
I have a workbook that if I use just the array formula for the totals it works fine and if I use data validation and vlookup and the array formula for the totals it is giving me a #Value! instead. I have tried a couple of things and did find that as long as I do not use the vlookup in the one column (column d) the array formula at the bottom works but as soon as I add the vlookup to column D I got the error.
I want to use the vlookup to get the values for items on a different page - along with the data validation and then use the array formula to get a total for multiple items in the above columns. I have attached a workbook.
I'm trying to do a simple conditional format where the date is highlighted in red if the difference between that date and Todays date is greater than 90 days.
I've done the formula as =(TODAY()>$B5)>90, which appears to work in the sheet and shows either True or False but when inputting that formula into the conditional format it highlights every single cells.
I need a formula that will take the value of one cell and put it in another cell other than the one in which I am typing the formula. I can't think of how to do this.
I have two columns, A & B (no headers), of information. The columns are not identical, and column B has empty cells scattered throughout the column. For each empty cell in column B, I want to copy the same row of information into it from column A, as if I'm just scooting the information in column A that's on the same row as the empty cells in column B.
This is simple with a cut/paste, but when there's thirty empty cells, cutting and pasting takes time. (What's really frustrating is that I've figured out a few formulas that will copy the information from column A but all the information gets pasted in the column in which I'm creating the formula (say, column F, for example). THAT doesn't help me because the empty cells in column b are still empty!)
I have a excel file Sheet 1 is active data Sheet 2 is complete data, How can I make the column move automatic from one sheet to another with out cut/pasting?
I'm dealing with forecasting invoices. The main column 'BALANCE' has a formula referencing the previous cell and then adding or subtracting invoices (ENTRY). The problem I have is that I'll put values in ENTRY that I expect to come in at some point but as they arrive I need to change the order of the cells. So I'm constantly changing the order and then it changes the formula in BALANCE. I tried absolute cells (and even found a work around way to flow absolute cells by flowing then viewing formulas then using the replace function but that didn't work.
So my formula in BALANCE is: =$I$173+$E$174-$G$174
but if I move G174 to another cell I'd like to keep the BALANCE formula to stay G174 instead of following the move.
I get an excel sheet with W/C Employer: (whatever) entered below the patient it belongs to in column E. This information needs to move into its own column (H) in line with the above patient information so I can use it in a mail merge to word.
The same thing needs to happen with WC injury date listed in column G. It moves to column I. Then delete the row it was moved from so I don't have an empty row.
Sheet 1 is what I get. Sheet 2 is what I need to end up with.
Column A | Column B | Column C Los Angeles | Fire Dept | 3 Los Angeles | Health Services | 12 New York | Fire Dept | 8 New York | Health Services | 22 New York | Internal Services | 100 New York | Public Works | 7 Chicago | Health Services | 15 Chicago | Public Works | 56 Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept Health Services Internal Services Public Works Social Services
I have set of data Pasted in 4th row, in the top row 44 columns values assigned i want move data from set of data to different column among these 44 columns
Like "Service Order ID" is 1 column in set of data ,it move to second column of top row
Some of column need to delete. (Service Order Type,Service Order Description,Created By,Status,Contact,Expected Delivery Date,
I would like to use the following code to produce a message with two numbers in it, both showing an exact golf handicap to one decimal point. If a number is exactly 6 I want it to show as 6.0.
All works well for the number I'm collecting from the user and storing in newh. But I can't retain/produce the trailing zero from oldh which is formatted in the spreadsheet as Custom 0.0.
I am looking for a macro or a formula that can give me multiple tabs, what i need is jan 01 to april 30,the next 2 books i could do by copying of course i have looked at the macros on here and no nothing about them ....
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
I want to make a little chart for easy reference that tells me due dates for projects, based on estimated completion times.
I'm already using NETWORKDAYS to find the amount of working days between today and a due date, but I want to flip the formula around, and I'm having trouble getting the syntax right.
For example, column A reads:
0 1 2 3 5 7 10 15 20
Estimated completion times for various projects.
So I want column B to read the date that this would render. A1, value 0, would always produce today's date for B1. B2 would always read one business day into the future, B3 would read as 2 business days into the future, B4 as 3 business days into the future. Does that make sense, and B5 as 5 bd into future.
My objective is to create a "guide or cheat sheet" for the correct combination of various tools.
My user has to choose (1) Mother Tool and (2) If the tool is to be used uphole or downhole.
I need the spreadsheet to automatically limit the choices for Combinability that corresponds to uphole or downhole. After selecting Combinability, the 4th ComboBox must automatically limit the choices specific to subs that fall under the tool chosen under combinability.
I can create a spreadsheet and color-code the combinations however it will be very busy as the list is very long.
I wanted to use ControlBoxes but I can't get it to work - my brain can't seem to connect the dots in VBA.
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P) phone (Q) primary phone (R) col S col T col U
This is kind of an extension to a previously solved post. For a similar problem I used the attatched file (which someone from here so kindly came up with - but to be honest i dont fully understand),
but now im getting onto numbers from 1 to 100 so could get very confusing in the table!
RANDOM TABLE2.xlsx
Basically I want to produced a random number, (which I have managed) then another number, but it cant have any common factors as the first.
So 1st = 10, 2nd = 13 is acceptable but 1st = 22, 2nd = 12 is not.
I have managed to do it with smaller values by just typing then out, but this is a very long winded technique, but is there a formula that can do this?
I have a set of data with index numbers and the percentage of their occurrence. I want to use this percentage to weight the occurrence of the index numbers and create a random list of say 500 occurrences.
I have created a macro some time ago that is an integrated part of an XLA. The Xla has worked fine but now, for some reason, the macro fails to import the specified text, it doesn't fail but nothing gets imported. I have tried solving this myself, but alas I am not bright enough
The code is:
Sub GetWorksheet() Dim filetoopen As String Dim wb As Workbook
filetoopen = Application _ . GetOpenFilename("XL Files (*.xls), *.xls") On Error Resume Next
I need to produce a summary of the monthly spend with parts suppliers for a number of vehicles, with each vehicle having it's own worksheet. The suppliers' names are in column C with the costs in column H.
So what I need to do is sum the results of column H on each worksheet when the supplier's name (which is on the same row) matches "Triple 7" and it's in the same month. The idea is to produce a sheet which displays the total spend each month with our suppliers.
All info goes to the master inventory and then if some enters an amount for respray then it is transferred to the respray sheet. when it is transferred to the respray sheet it put the date in Column A and then put 3 days later in Column B.
Every day it will change and the date in A1 changes to tomorrow but if another item is enter as having resprays then it transfers to the respray sheet and will bump down in column C but Column A stays the in the same spot.
I need Column A and B to move up and down if something in Column C moves up or down and it would be nice to always have the oldest date at the top.
I have attached a sample spreadsheet – what I want to do is insert a column before the current column A and move the current column D in to it and auto fill for every non blank cell in column B. Also, there are different values in column D such as “B03” ,”B41” etc – so for example, it should auto fill B03 until it comes across either a blank cell in column B or it comes across a “B41” and then it should do the same until it comes across a “B42” or a blank cell again. This needs to continue till the end of the report.
I am basically trying to find the first non-empty cell in a range, but I want the macro to look down columns first. In other words, I want it to look down column A, then column B, and so on. Right now I believe it is searching by rows.
With Columns("A1:D15") .Find(what:="*", after:=.Cells(1, 1), LookIn:=xlValues).Activate End With
