I am looking for a macro or a formula that can give me multiple tabs, what i need is jan 01 to april 30,the next 2 books i could do by copying of course i have looked at the macros on here and no nothing about them ....
View 14 RepliesI need to produce a summary of the monthly spend with parts suppliers for a number of vehicles, with each vehicle having it's own worksheet. The suppliers' names are in column C with the costs in column H.
So what I need to do is sum the results of column H on each worksheet when the supplier's name (which is on the same row) matches "Triple 7" and it's in the same month. The idea is to produce a sheet which displays the total spend each month with our suppliers.
Is it possible to make multple worksheets from a selection of multiple cells?
This would mean a selection of 10 cells would generate 10 sheets titled with the cell conent.
if it possible to produce a letter in excel like you would in word by mail merging.
i dont want to open word as i dont have it on my work pc.
im wondering if it possible to do something like this
dear ( sheet 1 cell 1 )
thank you for your order of ( sheet 1 cell 2 ) we wish to deliver to you on ( sheet 1 cell 3 )
Excel 2007
My workbook contains 13 tabs - 1,2,3,...12, and Summary
My data starts on line 4 of every sheet but varies in length - so far the longest goes to line 30.
Rows used on all 13 sheet are as follows:
A - contains facility names
B - contains a two or three letter code
C - contains hours
D - contains dollars
E - contains adjusted rate
On the Summary tab I have listed all the facilites and two or three letter codes. I need to sum column "C" on tabs 1-12 when they match columns A & B on the summary tab. I have tried the following but can't get them to work:
=IF($A5=""," ",SUMPRODUCT(--('1:[12]12'!A$4:$A$50=$A5),--('1:[12]12'!B$4:$B$50=$B5),'1:12'!D$4:$D$50))
I did not put the [12] excel added that automatically I had 1:12
=SUMPRODUCT(--(THREED('1:12'!$A$4:$A$50)=A10)*(THREED('1:12'!$B$4:$B$50)=B10),(THREED('1:12'!C4:C50)))
I just seen the THREED for the first time today and am not sure if this was the correct place to try but it didn't work anyway
I know it has something to do with the way I am trying to complete the loop.
I have tried next i, I have tried if's instead of the do until but can't get it to work.
I want it to cycle through the x and if a value is found then paste into the corresponding i row. If the x value is blank then exit the loop.
I would like to use the following code to produce a message with two numbers in it, both showing an exact golf handicap to one decimal point. If a number is exactly 6 I want it to show as 6.0.
All works well for the number I'm collecting from the user and storing in newh. But I can't retain/produce the trailing zero from oldh which is formatted in the spreadsheet as Custom 0.0.
I want it to copy and paste whatever the cell is;
Andrew Smith
not
ANDREW SMITH
Code:
Sub Replacing()
Application.ScreenUpdating = False
Application.EnableEvents = False
Application.Cursor = xlWait
Application.DisplayStatusBar = True
Application.StatusBar = "Generating DM Pack, please wait!"
[Code] .......
I have 3 sheets in the same workbook that I want to print in 1 PDF report, is there a way that I can do this?
View 2 Replies View RelatedI have an Excel file with 70+ tabs and was wondering if there was some way to group them together, short of just making separate worksheets.
View 6 Replies View RelatedI would like this Macro to run on 6 different tabs in a worksheet as one Macro. It is currently only running on the active sheet. The tabs that I need it to run on are labeled "Totals" "New" "Used" "Service" "Parts" "Other Income-Ded"
Sub ExpenseAnalysis2012()
Dim rngSource As Range
Dim rngDestination As Range
Set rngSource = Range("D3:E90")
Set rngDestination = Cells(3, Columns.Count).End(xlToLeft).Offset(0, 2)
rngSource.Copy
rngDestination.PasteSpecial (xlPasteValues)
End Sub
How can I sumif over multiple tabs?? Without using sumif(a:a,sheet1!a1,c:c)+sumif(a:a,sheet2!a1,c:c)
Like sumif(sheet1:sheet2!a:a,a1,sheet1:sheet2!c:c) I do not want to use a macro. I have about 80 sheets.
Sheet1
Apples 93
Pears 49
Oranges 20
Bananas 35
Sheet2
Apples 100
Pears 13
Oranges 2
Bananas 350
How can I do
=AVERAGEIF(AZ6:AZ1721,">0",AZ6:AZ1721)
But across 18 tabs all with the same ranges???
I trying to use the formula below to add values across multiple tabs but I am getting a value error. I think it is just a small punctuation thing.
=SUM(INDIRECT("'"&REF!$A$2:$A$3&"'!&$F$62"))
REF is the name of my references tab and has a list of the tab names
I have one tab for every month of the year plus a pivot table and summary page. Each month has 100+ products produced. In any given month the products could change, so a product could be on multiple sheets. I have used the pivot table to eliminate duplicates and create my summary sheet. Now I am trying to lookup the product description across the tabs using and if(isna(vlookup, but this does not seem to be able to handle more than a few tabs at once.
The second problem is I need to add the the production from each month for all the products produced in a year to the summary tab. I do not think the sumif function works here (or I am doing it wrong). I thought about an if(isna(vlookup +if(isna(vlookup and so on but do not think that will work either.
Could you help with an onerous task that I must complete every Quarter.
I have a spreadsheet with multiple tabs.
The first 3 Tabs are Calculation sheets and do not need to be re-named.
All the preceeding sheets each need to be renamed to the days of the month (British Format), skiping Sundays.
i.e Tab 4 should be renamed 010409, Tab 5 should be renamed 020409, Tab 6 should be renamed 030409, Tab 7 should be renamed 040409, Tab 8 should be renamed 060409 and Tab 9 should be renamed 070409 etc etc ...
Extra - Also if possible on each sheet could the Tab date be placed into Cell A4 (eg. 010409) and also the Day number (eg. 01) (Starting from 01 on 010409, 02 on 020409, 03 on 030409, 04 on 040409, 05 on 060409, 06 on 070409 etc etc ...) into Cell A6.
I am using this for my sheet =VLOOKUP(B1,master!$A$1:$C$45870,2,0)
I have added a tab "masterA" with 47K lines and a tab "masterB" with 38k lines.
How do I get excell to start with master--if it does not find it there - go to masterA --and if needed go to masterB? ( checking in that order )
I have imported a table from my access database. sadly, it has over 65536 rows. I am going to have to break table down into mulitiple sheets on excel. Using a VLOOKUP formula normaly like this. =VLOOKUP(E5,MHIFUPK,5,0)
where E5 is my target,MHIFUPK is the sheet with the table array, and 5 is the price of E5. Now I will have multipe sheets, and I need to be able to refreance all of them in order to find E5. Anyway to do this besides upgrading to 2007, (wish I could get the company to upgrade)
I want to make a little chart for easy reference that tells me due dates for projects, based on estimated completion times.
I'm already using NETWORKDAYS to find the amount of working days between today and a due date, but I want to flip the formula around, and I'm having trouble getting the syntax right.
For example, column A reads:
0
1
2
3
5
7
10
15
20
Estimated completion times for various projects.
So I want column B to read the date that this would render. A1, value 0, would always produce today's date for B1. B2 would always read one business day into the future, B3 would read as 2 business days into the future, B4 as 3 business days into the future. Does that make sense, and B5 as 5 bd into future.
[Code] ......
Trying to get columns 10, 11 & 13 to join so it says "Mr Noddy Bigshoes" (Salutation, Forename & Surname).
s/s is very large and the need is to transfer formulas from one column to another. Column L contains formulas in cells L7:L45 (attachment) - (L7:L326415 in working s/s). Some of these formulas result in a value being given. I need to transfer formulas only from those cells having values to cells three columns to the left on the same row. I do have code which I was using for another application. This puts a formula in the correct places but it is the wrong formula and I don't know how to amend it so that it carries out the required action. Small attachment enclosed for better understanding of what is involved. Or could anyone change the line ".formula = ......" in the following code to make it work??
View 5 Replies View RelatedI have a workbook that if I use just the array formula for the totals it works fine and if I use data validation and vlookup and the array formula for the totals it is giving me a #Value! instead. I have tried a couple of things and did find that as long as I do not use the vlookup in the one column (column d) the array formula at the bottom works but as soon as I add the vlookup to column D I got the error.
I want to use the vlookup to get the values for items on a different page - along with the data validation and then use the array formula to get a total for multiple items in the above columns. I have attached a workbook.
My objective is to create a "guide or cheat sheet" for the correct combination of various tools.
My user has to choose (1) Mother Tool and (2) If the tool is to be used uphole or downhole.
I need the spreadsheet to automatically limit the choices for Combinability that corresponds to uphole or downhole.
After selecting Combinability, the 4th ComboBox must automatically limit the choices specific to subs that fall under the tool chosen under combinability.
I can create a spreadsheet and color-code the combinations however it will be very busy as the list is very long.
I wanted to use ControlBoxes but I can't get it to work - my brain can't seem to connect the dots in VBA.
I want to define a varible named MonthEnd that I will use in more than one project. In a normal example the variable would look like this:
Dim MonthEnd As String
MonthEnd = Format(Sheet1.Range("C3"), "MMYY")
The problem is that I will be using this more than one time so I figured I could define this a Public constant like
Public Const MontEnd As String = Format(Sheet1.Range("C3"), "MMYY")
I've only recently ventured into the VBA scripting and am finding it quite exciting. After doing some trivial stuff, I'm trying to work with websites. Currently, I'm trying to pull data off of a website which poses a form which has to be filled first. I've been successful in filling the form and clicking submit, through the code, but the site opens the results in a separate tab in IE. I am unable to make it go to that tab and copy-paste data from there.
Secondly, instead of just blindly copy pasting, it would be better if the data is pasted in a more readable format (as on the website). The following code is plainly copying and pasting the data as-is and hence rendering it unreadable:
VB:
.ExecWB 17, 0
.ExecWB 12, 2
.PasteSpecial Format:="Text", link:=False, DisplayAsIcon:=False
We have these worksheets that have 100 tabs each
each tab is named joel_1400, joel_1401...Joel_1499 insert data in each tab template as needed for RFI's. then we have to make another worksheet with 100 tabs for 1500 to 1599
what we are doing is copying the whole worksheet and then erasing all of the user fields and changing all of the names manually for each tab
I have an excel spread sheet with about 300 tabs. each sheet has the same column fields..I need to pull certain column fields ( the same fields ) out of each tab and export them to another spread sheet.
View 6 Replies View RelatedI'm a bit over my head on this one. I want a formula that does the following: Look at the date I put in on the last tab and find the correct date on the other tabs. Using that date as the column I want it to return the correct row for the data.reference.
I am using the HLOOKUP function. I'm not even sure this is the right function. Ont the workbook attached I'm trying to get the data on the Totals tab to come from the Sept Wk 1 through Sept Wk 5 tabs. The formula I tried to use is on the Totals page C7.
I have a workschedule in excel.
It has a tab for every week in a year so 52 in total. The first tab is supposed to give some general information. I have a few questions on how to implement things.
1 i wanna be able to view the Total amount hours worked in my current week.
I calculate the current workweek using:
I have a lot of sheets, in my workbook. It keeps expanding, as I add them. How do I make multiple rows of sheet tabs, to keep from having to scroll across all the time?
View 4 Replies View Related