I am creating a holiday chart for absence, I have put the following formula in one cell
=COUNTIF(F4:NF4,"H")+COUNTIF(F4:AJ4,"HD")
Now when these letters are typed in to the range they calculate "H" and "HD" to be 1 - is it possible to have "H"=1 and "HD"=0.5 to then give a total in the desired cell?
Basically "H" is 1 day holiday and "HD" is (0.5) half day holiday, I would like the total from a range to appear in one cell
Is it possible to use multiple COUNTIF combined with AND formulas in a single cell?
The current cell equation is =COUNTIF(C14:C83,"Alpha Full")+COUNTIF(C14:C83,"Beta Full")+COUNTIF(C14:C83,"Final Full")
But I need to to only add those cells if another parameter, namely if another cell continas a certain month.
For example something like this =COUNTIF(C14:C83,"Alpha Full")AND(b14,"November")
I need a formula to count cells E7:E500 that say "Submitted" but only if cells R7:R500 say "PPB".
My original formula below is counting all cells except for the ones that say "PPB"
=COUNT(IF(E7:E500="Submitted",IF(R7:R50="PPB",'E7:E500)))
I'm working on a formula that will determine the lowest number in a range.
The complication is that the range varies based on how many rows match a certain criteria.
The formula I have created works correctly, however, I need to have the range go up to 10, and because of the limit of 7 nested IF's, I have to stop at 6.
=IF(A2=A1,"",IF(COUNTIF($A:$A,A2)=1,G2,IF(COUNTIF($A:$A,A2)=2,MIN(G2:G3),IF(COUNTIF($A:$A,A2)=3,MIN(G2:G4),IF(COUNTIF($A:$A,A2)=4,MI N(G2:G5),IF(COUNTIF($A:$A,A2)=5,MIN(G2:G6),IF(COUNTIF($A:$A,A2)=6,MIN(G2:G7),"")))))))
After a result is returned from this formula, I have to do the almost exact same formula, based on the min value from these results.
I am using =COUNTIF formulas to calculate different conditions. such as, calculating how much of one product do we have and how much is is received under 30 days. i want to combine those formulas in one cell to calculate two conditions in different columns.
1-So first i found out the date difference. I used =DATEDIF(Sheet1!C10,Sheet1!E10,"d")
2-Then I found out how many of one type do we carry, using the =COUNTIF.
=COUNTIF(Sheet1!J2:J3810,"DAZ")
3-That was easy, But now i have to sepereate them into 30 or less, 60 days or less, 90 days or less.
Then i used =COUNTIF(D2:D3810,"
I have this formula:
=IF( COUNTIF($H$42:$H$76,"A~*")/COUNT($J$42:$J$76)="","",COUNTIF($H$42:$H$76,"A~*")/COUNT($J$42:$J$76))
which seems to work fine if there's data in the range to compute. If there isn't it throws a DIV/0 error at me. How can I modify the above to
Be blank if there's no data to display in the range, therefore avoiding a div/0 error.
Is there a way to use multiple formulas for just one cell without damaging the others?
View 9 Replies View RelatedI have compiled a spreadsheet and it has columns for the days of the week, Mon through Fri. I have written a formula in R9 which will add a range of comments in the Recommended Actions column (R) depending on what is entered in I9:M9. So far so good
Unfortunately when I enter anything in I9, then enter something else in J9 the "Recommended Actions" just adds another comment after the previous comment in the same cell as the formula in there references I9 & J9 & K9 & L9 & M9.
Can you think of a way to set it up so that when I enter something in I9 then enter something else in J9 it changes the "Recommended Actions" from the old comment to the new comment or deletes the old comment before adding the new comment?
Formula:
=IF($I9="OK","Working ok",IF($I9="No Modulation","Check Profile and modulation",
IF($I9="FLD","Check pulse unit and meter operation",
IF($I9="No Data","Check Comms",IF($I9="Low Pressure","Check pressure on outlet",
IF($I9="High pressure","Check outlet Pressure",
[code].....
I have a list of numbers that I want to identify the highest and second highest numbers and create a mathematic result.
For example.
I lets say I have 15 stocks "B19:P19" I have X amount of money to invest "Q21" I want to invest 85% of Q21 in the highest of B19:P19 and 15% in the second highest. If there are 2 highest that are tied I want to split the 85% of Q21. SO far I have been able to identify the Highest and show it at 85% of Q21 with this =IF(B19=(MAX(B19:P19)),(Q21*0.85)) but I am not sure how to get the rest of it to do what I want.
I have a requirement to enter 25 formulas into 25 different cells. The formula is this:
[Code]......
The only thing that changes is the cell reference at the end which goes up in increments of 20,000, i.e. R20000, R40000, R60000, etc.
I have this set up and it works fine. My question is whether there is another quicker way rather than have the above code repeated 25 times?
How would I write a formula if I was trying to get the cell to count all expired certifications (based on a range of cells and their expiration dates) as well as all blank cells? This is what I have so far and all it's doing is displaying "FALSE"... =COUNTIF(D2:D95,"
View 5 Replies View RelatedI am working on a massive Pivot Table but in order to compile it I have to copy data from many worksheets into one. My problem is that each worksheet contains about 11,500 formulas with references to other workbooks and cells. However, none of these is locked for cell reference (meaning none has the $ sign for row or column) so copying and pasting obviously screws it up since the reference is changing but I need to have the links active in the pivot table.
It would obviously take me a year to add 440,000 individual $ signs. Is there any way, a trick of sorts, where I can just highlight the entire worksheet and add the $ sign to each and every cell reference automatically?
I would like to put the following two formulas in one cell, so if one condition is met, it returns 1:
Code:
=IF(IF((AND(MATRIX!C4=0.795),1,0)
Code:
=IF(IF((AND(MATRIX!C4>=-0.094,MATRIX!C4=0.795),1,0)
The formulas work fine as single formulas in one cell, but I can't figure out how to do both in one cell. I tried this but I get errors.
Code:
=IF(((AND(MATRIX!C4>=-0.094,MATRIX!C4=0.795),1,0,IF((AND(MATRIX!C4=0.795),1,0)
I've also tried using the OR function, get errors. I'm not sure which to use, IF or OR, and I can't get the syntax right on either one.
I actually have six formulas for each cell, but how to do two, then I'll know how to do all six.
I currently am using Data Validation drop-downs (which are identically referenced) in a number of cells (From J10 to J19). Each entry refers to a Crew departure &/or arrival time (based on an Aircraft schedule) and crew Subsistence & allowance ($17 per day). Referenced from “K10:K19” is USD currency:
DAYS:CURRENCY:
“J10:J19” “K10:K19”
“FULL-WEEK”(References 7 Days) = “USD 120.00”
“SATURDAY (DEPART)”(References 2 Days) = “USD 35.00”
“SATURDAY (ARRIVE)”(References 6 Days) = “USD 100.00”
“TUESDAY (DEPART)”(References 5 Days) = “USD 85.00”
“TUESDAY (ARRIVE)”(References 3 Days) = “USD 50.00”
I am trying to establish a way to specifically; select a particular day in the Data Validation drop-down menu (J10:J19) and a formula automatically converting the result to “USD Currency” for each of the 5 alternatives?
So in other words, each data validation cell will have 5 matching formulas pertinent to each specific orientation (Day)?
E.G.Select “FULL WEEK” from the drop-down option and “USD 120.00” is revealed / converted?
Select “SATURDAY (DEPART)” from the drop-down and “USD 35.00” is revealed?
... “SATURDAY (ARRIVE)” = “USD 100.00”
... “TUESDAY (DEPART)” = “USD 85.00”
... “TUESDAY (ARRIVE)” = “USD 50.00”
The closest I have managed (with no real success) is as per the following formula:
IF(T26="FULL_WEEK",X26,IF(T26="TUESDAY_(ARR)",X27,IF(T26="SATURDAY_(ARR)",X28,IF(T26="TUESDAY_(DEP)" ,X29,IF(T26="SATURDAY_(DEP)",X30)))))
I would be so incredibly grateful if somebody could help me (in laymen’s terms)?
I'm looking for a way for Excel to combine formulas together into a more compact form for me.
Attached is a very simple version of what I want, my actual formulas are very complex but I'd still like a way to have them automatically combined into a single cell.
Alternatively, what is a good way to break down a very complicated one-cell formula and still keep things organized?
Here is the one-cell version of a formula I work with.
[Code] .......
That formula is difficult to work with in one cell, so on another sheet I have it broken down into parts so that if one part isn't doing what I want I can change it. This takes up a LOT of space because of the other steps I do (the above formula is just one step) and I'd like to combine it together.
Attached File : Excel Formula Combination Question.xlsx‎
I am trying to make a button that will re-initialize the workbook: clear (delete) all unlocked cell's values. I have the following
View 5 Replies View RelatedIs there a way to unfix multiple cell references from formulas in a range of cells at once?
View 2 Replies View RelatedProblem-1) i want to round off the digit in the same cell i,e. Formula in F12 should be included in D12.
Problem-2) i have entered a sample account.in this i want to post the data entered in day book into their respective sheets of jaya and supervision automatically.
I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH
I tried several versions, I am hoping for something like this:
=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292
Following on from: http://www.excelforum.com/excel-misc...s-formula.html
I used the above formula to work out how many days a call went out of our SLA, that works great (puts the values into K)
I am trying to create a formula that will tell me how often our sales reps are going to specific accounts. I have a master list of each persons accounts and next to each account name there will be a cell with a formula in it. This formula will look at the cell next to it, "the account name", and then count how many times that name comes up over each months sheet. I was also wondering if I can then get the average over 12 months in the same formula. If not thats ok.
The problem I am having is that I keep getting an error #VALUE!. I had no problem with it looking at only one sheet, but when I do more than one it gives me an error. I think it is the was I am breaking up each sheet. I have tried to do it every way I can think of... ,;) Nothing seems to work.
I have a table like this:
Name (A).....Date-in (B)....Date-out (C)
Name1........27/12/2008....3/01/2009
Name2........25/11/2008....28/11/2008
...
I want to count the rows (in the entire table) that B and C dates intersect with a reference dates (say J1 and J2).
It is a booking table so I want to know if the apartment is available for the reference dates (i.e. no bookings for that days).
I tried first a simple double conditional to know if a date is inside two dates but it didn't work:
=SUMPRODUCT(--(B:B<J1),--(C:C>J1))
I have a workbook with alot of sheets, each sheet is identical in format. What I am trying to achive is a way of counting all the occurances of a name in a range of cells on all sheets.
To try and explain, each sheet has a drop down list in cells C5:V5, and I need to try and get a way of a summary sheet showing how many times "J.Bloggs" appears in All Sheets accorss the range C5:V5, but am finding it impossible.
I am trying to tally answers for a survey. Column A specifies one of 3 locations (Boulder, Larimer, Westminster) and column C specifies a grade for services between locations (Not Uniform, Slightly Uniform, Very Uniform). I was able to tally each separately using 'COUNTIF' and the conditions, but now I would like a total for each of the grades by location, i.e. a count of people answering both Boulder and Uniform, etc.
View 5 Replies View RelatedIn my Sheet "List" I have list of persons working on different projects.
I prepared graph after putting conditions on Project Type, Project Size, Project Year & Position (PM Project Manger). Every thing was done a in a nice manner with the help of below formula.
PJ TYPE , PJSIZE, PJYEAR, POSITION are ranges names.
=SUMPRODUCT(--(PJTYPE=$A$2),--(PJSIZE=$A6),--(PJYEAR=B$4),--(POSITION="PM"))
But the problem was occured that in a year if a person work on small project more than once then he will be counted only once. But if he has worked in same year on Medium or Larage project then they will be counted separately. I tried to oversome the problem with the help of Pivot Table and put manually some legend P1, P2 & P3 against the person name if he is working on same type of project in same year. then count only P1 in my formula to count how many Project Manager worked on Project. like
=SUMPRODUCT(--(PJTYPE=$A$2),--(PJSIZE=$A6),--(PJYEAR=B$4),--(POSITION="PM"),--(PMCOUNT="P1"))
Now i am trying that in a separate columm of # of PM there must be a formula which only put P or 1 for a person if he is working on same project in a year but i want that p or 1 only appear against his first entry i duplicate. for other persons it automatically enter 1 or p if they are appearing only once. i have tried a lot while using countif with multiple conditions but all in vain.
i want to use Countif() when 3 ceritera are true
ceritera
--------
1) Branch Name
2) Status
3) Login Date
can this be done by any mean
what I'm trying to do is to make a logbook for a machining center. Each part has an op10 and an op20, essentially front and back. And each part number falls into the category of OS or FS. I've used AND logic to make tables in hidden columns to be used by a countif statement to determine my totals. I.e. to determine if a scroll is completed, op20 has a a value of 1 AND column C is "OS".
I use
=IF(AND(A9=1;C9="OS");1;" ")
Then I countif criteria is 1 in the column i created with that statement.
That works just fine. Now what I want to do is to be able to create daily totals of OS and FS by simply modifying a variable date in a formula. So I'd like to essentially say: Countif Column C =OS and Corresponding column D = 1, and corresponding Shift date = 10.02.12(date to be variable). I'm at a wall here. Is there any way to do this somewhat simply?
I have 50 worksheets with shirt sizes. I am trying to count the number of instances that we have "XL".
So I use the formula:
=COUNTIF(worksheet1!A1:worksheet50!A1, "XL")
I also tried:
=COUNTIF(worksheet1!A1, "XL")+COUNTIF(Worksheet2!A1, "XL")+COUNTIF(worksheet3!A1, "XL")...etc
Niether work, in fact, excel decides just to leave the function as written above in the cell when I enter out of it or go to another cell. Sometimes it works if I "COUNTIF" multiple cells in one worksheet but will leave the formula as is if I try to manipilate it.
I'm trying to count multiple criteria from a second page in a work book, all the formulas i've looked up and tried do not seem to work... here's the formulas i've tried. DKOBULAR is the name of the 2nd page. D is the column used for the different resolves.
=COUNTIF(DKOBULAR!D:D="resolveA")+COUNTIF(DKOBULAR!D:D="resolveB")+COUNTIF(DKOBULAR!D:D="resolveC")+ COUNTIF(DKOBULAR!D:D="resolveD")
=COUNT(IF(DKOBULAR!D:D="resolveA",IF(DKOBULAR!D:D="resolveB",IF(DKOBULAR!D:D="resolveC",IF(DKOBULAR! D:D="resolveD")))))
I have a long list of past jobs, around 4000+. I have multiple fields, but I really wish to concentrate on the:
1) Job Type - Example would be Medical or Imprint
2) Job # - Correlates when it was done - Example would be 91059 would be a job within 2008-2009 fiscal year.
All the jobs are listed in the first spreadsheet. The second spreadsheet will hold generalized data broken down by the Type of Job and the fiscal year it was done.
I wish to first count how many jobs fit a specific job type. This was easily done:
=COUNTIF(Data!A2:A4121,A7)
A7 = Medical
A1:A4121 = the range of the names.
Count comes up as 346, which is correct.
I then want to add another parameter to break up the 346 by fiscal year. It ranges from 05-06 to 08-09. I came up with this:
=COUNTIF(Data!A2:A4121,A7)-COUNTIF(Data!F2:F4121,"9????")
Since the job # correlates to the fiscal year it was created, anything starting with 9 is a job done in 08-09. Anything starting with an 8 would be of course 07-08 range. I would have multiple fields with each different fiscal year.
However, when I put the 2nd formula in the function didn't work. It keeps the count at 346, which I know is wrong. I am not sure if I did something wrong here. Been looking at this for an hour and can't figure out what is wrong. The jobs that are medical within 08-09 fiscal year should be 120, but it keeps at 346.