Opening A Workbook And Selecting A Specific Sheet Within
Dec 19, 2006
is there any way to open a workbook and select a sheet within the book without having the entire name?
I've got a unique workbook and worksheet identifier but don't know how to use wildcards to get my macro to open the right workbook.
to open a workbook at a specific time. I want to beable to flip my computer on at 8:50am, go grab some coffee and then at 9:00:00am have my workbook open and performing tasks. Besides turning on my computer, I dont want to have to open or activate anything prior to having my workbook open. However if there is code to turn on my computer from a sedative state that would be great too.
I would like the workbook to open to a specific worksheet everytime it is opened regardless of what worksheet it was in when file was saved. Can someone point me in the right direction?
I have x number of sheets in a workbook, and I am looking to copy sheets a, b and c into a new workbook that I will create.
The a, b and c are in no order, or consecutive (although they could be). I want to be able to count the number of sheets in the workbook, and traverse through that to find sheets that I need, and select them to copy over to a new workbook.
I have a worksheet which is used by multiple users at the same time, at the end of the day I can have upto 10 files. The layout of all the files is the same, same number of columns and rows, the only difference would be the file name eg:Test1.xls, Test2.xls etc. information in test1.xls will not be any other file. At the end of the day, these files are emailed and saved in a particular folder.
What I need is get information from all the files saved in a particular folder and keep columns which have data. Additionally, if there is no data for any columns after combining the columns to display an alert. The final file should have information with only data in individual columns and arranged in the order such as Center 1, center 2, Center 3
Eg:test1 Column A Column B Column C.....upto 30 columns Center 1 Center 2 center 3....upto 30 centers 1 4 2 3 5
test2.xls
Column A Column B Column C.....upto 30 columns Center 1 Center 2 Center 3.....upto 30 centers 5
The final file will look like this
Finaltest.xls Column A Column B Column C.....upto 30 columns 1 4 4 2 5 3 5
I have a workbook that consists of 3 sheets, it's a template I use. Once I am done filling out sheet 3, I save as a new workbook. When I have to go back to the template workbook it always opens on sheet 3. Is there anyway that once I open the template workbook it will open on sheet 1?
I am trying to write code which copies the activesheet (called "Data"), opens a new workbook, pastes the data into it and closes the new sheet as "sales 2008" followed by the date. What I have at the moment is:
I have a main workbook that uses a macro to open a workbook provided to me from another department. This workbook contains a sheet that is basically a copy of the sheet in the main document and has the same sheetname and same codename.
The macro should copy the sheet data from the site workbook to the sheet in the main workbook. However, when i tell the workbook to select the sheet in the site file using its codename it errors....
I have 30 and above sheets in a work book and like that I am having 5 such books. The sheets are named as 201, 202, 203 ....etc as per the contents in that particular sheets. (201, 202 .....are the P.O nos.). all the work sheets are of having similar format of datas.
Now what I need is if I want to look the details of one single sheet (say 324) I have go all the sheets one by one and it is hard to find out.
If any body give me a solution so that if I type a particular no. (forms part of the name of the sheet) that sheet should appear for me.
I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.
I have a need to open a file from my companies intranet. My current method was to open said file via the method that the recorder gave me. However, I would like ot be able to open a said file without having to start open another workbook.
This is the path: [url]
So the command is this: Workbooks.Open [url]
Links are not actual links
So what I need to know. Is how can I open this file without opening a workbook. I haven't been able to use the VB "Open Statement" to open a file and I don't believe that I've been successfull using the Filesystem object either.
I have build an add-in To Calculate Specific Sheet when something change in the workbook. For this I am unselecting the "automatic calculation" option and check "Manual". Now with every change in a cell i would to call AUTO_CALCULATION_PI that is calculating only the sheet that the user have been selected.
The problem when i change a cell Workbook_SheetChange is not stiggered and nothign happen. I dont understand why? The add-in is doing the following. Create a Menu "PI Options", this open a user form where you can select the worksheet to calculate, the choices is store in hidden worksheet called "AUTO-CALCULATION-PI". When a cell is change the Macro AUTO_CALCULATION is called, and calculated the sheets that the user have selected.
I have two workbook having 8 worksheet each. Every day I need to copy data from previous day worksheet and paste it on new workbook with same sheet name.
For example :- Workbook1 is having sheet named aa, gg, tk ..... Workbook2 is having sheet named as same as Workbook 1
Now, I want macro to copy data from Workbook1, sheetname 'aa' and paste the same in workbook2 in sheet name 'aa' and likewise
I have data that is on a separate .txt file (the source file) that resembles this;
A B C D E F
1 Case District Pct Division Level1 Level2
2 305035 0 20 72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
I am using the below code (i have combined different bits of code which i found on these forums) to open a new workbook, copy all the data in it and paste it into Sheet2 in the active workbook . Also, i want the data to be pasted on the next empty row as there is already data in Sheet2. The data that is being copied and pasted has the same format and it is going to be repeated many times.
The problem i am having is that it is not offsetting the data to the next empty row - i think it is a simple change but i can't seem to get there :s
Also, the code is currently selecting all of the data from the workbook that i open - is there a way i can select all of the data, excluding the first row (the first row contains the headings which i already have in Sheet2 in the active workbook).
I have created userform and it works fine. Following code assigned to 'SUBMIT' button in userform - works fine. I am trying to include code where certain data from userform is also copied to workbook2 ( of course without opening it)- as marked in red...below
I get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
I have a spreadsheet that data gets exported to from a software program. There is information such as customer name, part number, inquiry number, etc that I'd like to use to develop a log of all my estimates I create for parts. I'd like excel to take the cells I select and insert them into certain cells in the other workbook and automatically save that workbook. This will create a log of all my estimates where I can then link the full estimate to the log. The information will have to go in the next available row. Is there any way I can accomplish this without having to open the other workbook and save the work book each time?
I'm having a problem to use the macro for opening a specific worksheet in a workbook. My plan to setup the workbook to open the first worksheet no matter which worksheet that was last saved and close.
What i have in mind is like below macros but it is not working.
Private Sub Workbook_Open() Worksheets("Main").Activate End Sub
Attached is the sample for the workbook. Test file.xlsm
I have a spreadsheet with Employee details and each employee has a Indicator and a Score. I'm battling to get Excel to do a lookup on the Indicator, find the applicable Score Range, see if the individual's Score falls within the range and then inserts the relevant % into a cell in a specific row of each employee.
If we did not have more than 2000 doing it manualy might have been an option. Also, the Percentages and Score Ranges in the matrix might change a couple of times....
I'm trying to clean-up a huge bulk of data. What I want to do is automatically select all rows, where column K contains text value "Closedloss", and have all these rows cut/pasted to Worksheet "ClosedCases". The second is similar to the first, but I want to select all rows where column J contains a value of 60-80, and have all these rows cut/pasted to Worksheet "MidRange".