Opening Specific Worksheet Using Macro
Mar 6, 2014
I'm having a problem to use the macro for opening a specific worksheet in a workbook. My plan to setup the workbook to open the first worksheet no matter which worksheet that was last saved and close.
What i have in mind is like below macros but it is not working.
Private Sub Workbook_Open()
Worksheets("Main").Activate
End Sub
Attached is the sample for the workbook. Test file.xlsm‎
View 3 Replies
ADVERTISEMENT
Nov 22, 2008
I would like the workbook to open to a specific worksheet everytime it is opened regardless of what worksheet it was in when file was saved. Can someone point me in the right direction?
View 2 Replies
View Related
Jan 25, 2007
I have a workbook that contains worksheets whose sheetnames are specific to each day of the month ie: 1st 2nd 3rd 4th 5th, and so on up to 31st. I am trying to write an workbook open procedure to check the day of the month and match it to the relevant worksheet so it will open to that day. for example if opened today being the 25th, i want the code to unhide sheet named 25th and select it, whilst all other sheets bar one is hidden.
View 5 Replies
View Related
Mar 11, 2014
I have software that exports to an excel file. The files are one or two page reports. The way the software dumps the reports into excel, it comes out looking pretty rough. The rows and columns aren't spaced very well, the fonts look like garbage, and nobody likes them.
I would like to apply formatting changes to these reports automatically without the end user having to do anything. So as soon as the document is opened up it bolds the column headers, adjusts column widths etc. The reports are auto generated so no formatting can be done when the reports are made.
There may also be different formatting done to different reports. The files will come out named something like, "Report_A_DDMMYYY.xls, Report_B_DDMMYYY.xls," etc. Report A, and Report B will likely need different formatting.
I'm not opposed to using VBA or whatever might be necessary to make this happen. I can learn anything I need to pretty quickly, I just don't know where to start with this.
View 4 Replies
View Related
May 12, 2008
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
View 9 Replies
View Related
Apr 15, 2014
I'm trying to add some code so that it only runs on the specific sheet or a range of specific sheets - but this list might change in the future) as a worksheet event... When I have been doing this in the past, I have been copying the code to each of the individual sheets but this now seems to be incorrect.
This time, though, I have created the code on one sheet (with a Private Sub Worksheet_Calculate() event) which launches a macro in a separate module - my logic being to have as little code as possible in each of the sheets for copying, pasting, editing purposes, and centralise the main code in the module. However, I've noticed that this code is actually being run on all the sheets - even those I do not want it to run on. I thought, while developing this code, that it would only run on the one sheet it had been added to (e.g. right click the worksheet name, view code).
View 7 Replies
View Related
Aug 31, 2009
I am looking for a macro which will take specific data from one sheet to the 2nd. I have attached the sheet. The Input data in the 1st sheet and the consolidated dat ain the 2nd one. Kindly assist. In the Final Sheet:
The Description column shld contain the data from B7:C7 and the B10:C10 together in one cell and that shld be copied till the end
The Description (Design steps) and Expected Result coulmn shld take data from the Test Step Description and Expected Result. And the Step Name shld be counted automatically till the last input. Test Name column shld be the 1st woksheet name.
View 4 Replies
View Related
Feb 22, 2012
I've been using this macro to pull data from multiple files, but instead of it creating a new tab, how can I have the macro pull the data and save it on a specific tab name(ex. Comp Stores). Here's the code I have currently.
Private Declare Function SetCurrentDirectoryA Lib _
"kernel32" (ByVal lpPathName As String) As Long
Sub ChDirNet(szPath As String)
SetCurrentDirectoryA szPath
End Sub
Sub Combine_Workbooks_Select_Files()
Dim MyPath As String
[code]....
View 1 Replies
View Related
Feb 28, 2008
I want to create a macro that when selected will take me to a specific row and column in another worksheet, this will be the outcome of two cells, so far i have it to take me to the row but no reference to the column can anyone help.
code i have so far.
Sub Find_Todays_Date()
Dim FindString As Date
Dim Rng As Range
FindString = Sheets("Dynamic Whereabouts").Range("B1:B1")
With Sheets("whereabouts 08").Range("A:A")
Set Rng = .Find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlFormulas, _
View 9 Replies
View Related
Nov 15, 2013
Whenever I try to use Sheets("Volumes").Select or .Activate on a specific worksheet, my macro code will immediately terminate with no error message. Iv'e used F8 to step through several modules and found that this happens every time it hits that line. The wierd thing is that i can select this sheet when screenupdating is off and I select it from a called subroutine. No other worksheets in this workbook are having this problem.
Additional info : using Sheet1.Select will select it with no issues but I don't want to go this route since it's a workaround and not a solution to somthing that should work.This problem occurs in several modulesEverything used to work fine and just one day it decided that i couldn't select the "Volumes" sheet in VBA anymore.I can click on the sheet no problem and it is not protected or hidden.
View 1 Replies
View Related
Apr 30, 2008
I have searched the FAQ's but have not found a suitable answer to my problem. I have some code that works perfectly when it is run from the VB Editor but when I put it behind a command button it gives me an error almost straight away. I have read that when a command button is used the command button defaults the active sheet to the one that it is one therefore you always have to specify the active sheet but I have done this so am still confused as to why it is falling over. Below is my code, I have commented where it is tripping:
Sub FormattingAcutalReport()
Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesMF Consolidated Risk DAILY LIVE DATA FROM BO.xls"
Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesDaily Non Banks LIVE.xls"
Dim myBorders() As Variant, item As Variant
Set SEGNSEG = Workbooks("Todays Reports.xls").Worksheets("Seg and Non Seg Bank Summary")............................
View 2 Replies
View Related
Oct 2, 2007
to open a workbook at a specific time. I want to beable to flip my computer on at 8:50am, go grab some coffee and then at 9:00:00am have my workbook open and performing tasks. Besides turning on my computer, I dont want to have to open or activate anything prior to having my workbook open. However if there is code to turn on my computer from a sedative state that would be great too.
View 9 Replies
View Related
Apr 29, 2014
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
4) repeat requirement 3 till no more Scenario's
View 14 Replies
View Related
May 26, 2014
I want to run macro for copying specific cell values from worksheets according to their headers in one final worksheet of the same workbook. worksheets can go upto 30-31 ws as per the dates in the month. This would really save time and energy of copy paste.
Attached is the workbook : Datewise.xlsx‎
View 5 Replies
View Related
Dec 19, 2006
is there any way to open a workbook and select a sheet within the book without having the entire name?
I've got a unique workbook and worksheet identifier but don't know how to use wildcards to get my macro to open the right workbook.
View 9 Replies
View Related
Aug 22, 2013
The issue is the I want to put the condition here in my the code that only copies the desired cells if the sheet is named specifically such as "Jan", if not named as this the worksheet should not be used. The current code I am using was posted on this site in 2009: VBA to copy specified cells from all the files in a folder
My modified code is:
Option Explicit
Public strSourceFldr As String
Public EachFile As Object
Public objFSO As Object
Public objFolder As Object
Public objFile As Object
Public strSheetName As String
[Code] .........
View 1 Replies
View Related
Jul 8, 2006
I have a workbook with loads of various worksheets,, which is shared between a group of us.
What i want is that each time the workbook is opened it always starts on the same worksheet called 'main'.
View 5 Replies
View Related
Nov 17, 2009
get a message box pop up upon opening of workbook no matter that tab its saved at.
View 3 Replies
View Related
May 10, 2007
how does one run code, particularly to rearange some columns upon opening a worksheet?
If A > D Then
{A=D
B = E
C=F}
and
{D=A
E = B
F=C}
End If
View 9 Replies
View Related
Jul 13, 2006
Is it possible to have a text box and a macro button that when a user enters a name of a folder (or part of the name) on say the c: drive it takes you there? Example being i have a folder called Alcan Inc on my c: drive, so i type in the text box alcan and click the macro. it then opens a windows explorer screen with the folder open.
View 2 Replies
View Related
Mar 4, 2007
I'm having an issue with a worksheet that I created. Apparently, every time that I go to open it, it gives me a Grey blank screen. Yet, I know the worksheet is behind this Grey screen. I went to full screen and I can see the work sheet in full view, but it always opens in this Grey screen. I'm not sure why its doing this, no other worksheets open in this matter. I have tried reinstalling excel and it still didn't fix this problem. But it is only happening with one particular worksheet. I'm sure it is just a setting that I might have changed, but I can't figure it out. The file isn't corrupt because the macros still work, I tested them.
View 7 Replies
View Related
Jul 22, 2008
Anyone who opens my sheet, has to feed his/her name which will be appeared in a particular cell.I am using the below code.
View 12 Replies
View Related
Jul 20, 2009
how to update a function when opening worksheet. I made
View 4 Replies
View Related
Jun 26, 2013
I have this VBA work fine for me but I want to chage this to when it copy then it select active sheet and active cell.
Sub test()
Dim wb As Workbook, wb2 As Workbook
Dim ws As Worksheet
[Code]....
View 3 Replies
View Related
Dec 12, 2007
I wish to send a message when a worksheet is manually opened, but not when it is activated from within VBA.
The following code does not work, and I am open to suggestions
Private Sub Worksheet_Open() ....
View 9 Replies
View Related
Dec 12, 2008
I have the following code, which I use to open up a .xls file generated from Crystal Reports:
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Dim fexport1 As String ' variables for the exported file
Dim fexport2 As String
Dim wb1 As String 'variables to change between the opened workbooks
Dim wb2 As String
strTemp = "Please Choose The Exported File"
MsgBox strTemp
fexport1 = Application.GetOpenFilename("Excel Files (*.xls), *.xls)")
If InStr(fexport1, "False") = 0 Then
Workbooks.Open fexport1
wb1 = ActiveWorkbook.Name
Else
strTemp = "Operation Canceled"
End If
The problem is that Crystal Reports generates the file with an invalid worksheet name (it contains a backslash) and I do not have access to modify the Crystal Report. Althought the file can be automatically repaired by Excel when manually opened, the macro chokes and the "Application.DisplayAlerts = False" does not fix it. The only solution I can think of is renaming the worksheet without opening the file.
View 9 Replies
View Related
Aug 25, 2006
if you open a workbook & choose not to enable macros, is there any way to later change your mind & set macros to enabled without having to close & reopen the workbook?
View 9 Replies
View Related
Apr 16, 2014
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
[Code] .......
View 2 Replies
View Related
Jul 13, 2012
I am trying to have an operation run when opening the Workbook. The UserForm opens fine, but I get an error when the GoButton_Click sub runs. The error file is not very comprehensive.
The user is promoted to 'Delete' or 'Cancel' before the sheet is deleted. I do want to select 'Delete' for the user, but I'm not sure how to do this.
The error mentioned occurs after the user selects 'Delete'. The error is:
Run-time error '-2147417848 (80010108)':
Automation error
The object envoked has disconnected from its clients.
VB:
Option Explicit
Private Sub UserForm_Initialize()
Me.Choices.List = Array("Choice 1", "Choice 2")
End Sub
Private Sub GoButton_Click()
If Templates = "Choice 1" Then
[Code]....
View 5 Replies
View Related
Feb 6, 2014
I have a workbook with two worksheets, "Main" and "Control".
Both of them are with hidden tabs (unchecked "show sheet tabs").
On worksheet "Main" I have command button which opens worksheet "Control".
The assigned makro is: Sheets("Control").Select
The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.
1. I need macro on "Main" which will allow me to open "Control".
2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".
I use Excel 2007 (at home) & 2010 (at office).
View 1 Replies
View Related