I have a spreadsheet with Employee details and each employee has a Indicator and a Score.
I'm battling to get Excel to do a lookup on the Indicator, find the applicable Score Range, see if the individual's Score falls within the range and then inserts the relevant % into a cell in a specific row of each employee.
If we did not have more than 2000 doing it manualy might have been an option. Also, the Percentages and Score Ranges in the matrix might change a couple of times....
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code: For Each c In Range("Q2:AC2").Cells If c = period Then c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I'm trying to clean-up a huge bulk of data. What I want to do is automatically select all rows, where column K contains text value "Closedloss", and have all these rows cut/pasted to Worksheet "ClosedCases". The second is similar to the first, but I want to select all rows where column J contains a value of 60-80, and have all these rows cut/pasted to Worksheet "MidRange".
I'm trying to find the best solution for this problem. I have an excel sheet that contains over 2,000 rows of data with 8 columns. In this sheet, I need to be able to select entire rows that look for specific names in column E which is titled "originator".
The name format looks like this: Selzer, Paul (TEM) Wathen, Charles (TEM) Chapman, Steven (TEM) etc
I have a total of 15 names that I need excel to look for in this entire sheet. What are my best options for this? I tried conditional formatting, but that does not work that well, as I would have to manually enter in each name.
I'm using Excel 2003 and I have a small problem using text functions. My problem is that in column 'A' I have a name and their year next to it between brackets, like so: Wright Jeffrey (1PBSO)
Now what I have to do, is make two new columns where I extract the surname (Wright) to one columns and the first name in another column (Jeffrey), the "(1PBSO)" doesn't have to go anywhere. Now I wouldn't have a problem with this normally but in the list I have names like 'Van Tongerloo Johan' where VAN TONGERLOO is the surname and JOHAN is the first name. For the first name (Wright Jeffrey (1PBSO)) I just used the LEFT function and then searched for the first space in the string but that doesn't work in the second example anymore.
I am looking for a way to select specific columns in excel that have specific characteristics in the header titles. For example, I have a very large worksheet with columns that specify the year and month (ie. "1900-8"). The years range from 1900 to 2011 and each year has "-1" to "-12" to represent the months of the year. Specifically, I am wanting to pick out all of the columns ending in "-8" (August).
How to get Excel to select all cells within a specific column that contain a specific character. In this instance, I need to select all the cells which contain a comma...
And even better would be if I could get Excel to not just select all the cells in a specific column containing a comma, but each of the rows in which those cells reside.
I have a output file that is collected time stamped data. How do I select the rows of the first time stamped collection. So, if the first row is stamp with 03-Jan-2009 23:59:00, I want to copy all the rows with that time stamp below the first row and stop when the time stamp starts at 03-Jan-2009 00:00:00. Attached is my sample sheet.
I have a Lookup table with a Group and Subgroup field. I have created a range for the Group and also for the Subgroup. On my main page, I have created a list option which allows the user to select the items under Group (Day, Colour and Time).
What I want next to do is based on the primary selection for Group; I want it to filter it on the specific Subgroup. For Example,
The User selects Colour from Group, the Subgroup will subsequently only show the appropriate selection which is Green, White and Yellow, and no further selection.
know the VBA script to select only specific cells within a worksheet. To be more precise, on sheet 1 - A2, A6 and A10 cells are filled with red color. I want only those cells which are highlighted in red to be selected, copied and pasted to sheet2.
I have x number of sheets in a workbook, and I am looking to copy sheets a, b and c into a new workbook that I will create.
The a, b and c are in no order, or consecutive (although they could be). I want to be able to count the number of sheets in the workbook, and traverse through that to find sheets that I need, and select them to copy over to a new workbook.
is there any way to open a workbook and select a sheet within the book without having the entire name? I've got a unique workbook and worksheet identifier but don't know how to use wildcards to get my macro to open the right workbook.
I have a worksheet which is used by multiple users at the same time, at the end of the day I can have upto 10 files. The layout of all the files is the same, same number of columns and rows, the only difference would be the file name eg:Test1.xls, Test2.xls etc. information in test1.xls will not be any other file. At the end of the day, these files are emailed and saved in a particular folder.
What I need is get information from all the files saved in a particular folder and keep columns which have data. Additionally, if there is no data for any columns after combining the columns to display an alert. The final file should have information with only data in individual columns and arranged in the order such as Center 1, center 2, Center 3
Eg:test1 Column A Column B Column C.....upto 30 columns Center 1 Center 2 center 3....upto 30 centers 1 4 2 3 5
test2.xls
Column A Column B Column C.....upto 30 columns Center 1 Center 2 Center 3.....upto 30 centers 5
The final file will look like this
Finaltest.xls Column A Column B Column C.....upto 30 columns 1 4 4 2 5 3 5
I'm attempting to write a macro that will select all the rows which contain a value in a specific column. Say for example, all the instances of "test" in column C, I need to select the entire row with that value in the column.
I should also mention that by using an autofilter, only specific row numbers are selected. The source spreadsheet is dynamic and will not always display the same value in the same row, and thus I need something a little more adaptable.
Whenever I try to use Sheets("Volumes").Select or .Activate on a specific worksheet, my macro code will immediately terminate with no error message. Iv'e used F8 to step through several modules and found that this happens every time it hits that line. The wierd thing is that i can select this sheet when screenupdating is off and I select it from a called subroutine. No other worksheets in this workbook are having this problem.
Additional info : using Sheet1.Select will select it with no issues but I don't want to go this route since it's a workaround and not a solution to somthing that should work.This problem occurs in several modulesEverything used to work fine and just one day it decided that i couldn't select the "Volumes" sheet in VBA anymore.I can click on the sheet no problem and it is not protected or hidden.
I didn't create this. Anyway, the problem is that most of these cells will be empty unless a whole bunch of other stuff is filled. These N cells take several values, put them together and create a new one. As time goes by they are filled. While they aren't filled, they'll return the DIV/0 error.
So when that formula I pasted there uses all of these values, it also returns a DIV/0 error because it is getting info from cells that have this error.
I managed to correct that with this =averageif(N15:N357;"<>#DIV/0!")*100%
It works like a charm save for one problem. When I use averageif I'm forced to use an interval. Along this interval other values show up (it is always a value ranging from 0 to 2). So when the formula works its magic the results are slightly skewed because of this other value that I don't want.
So I figure there must be two ways around this. The first one would be using something like averageif that lets me use several handpicked cells instead of an interval. If I try
It doesn't work, it says I have too many values. So if I could the exact same thing as I did with averageif but keeping all of these values it'd be super nice.
The other solution, less nice but equally effective I guess, is using this same interval but having more than one criteria. The first criteria would still be the one telling it to ignore DIV/0 error, the second criteria would be the one to ignore any values equal or lower than 2.
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
I am receiving a 'subscript out of range' error on the lines of code below.
I would note that all variables are declared and all seem meaningful as regards what you would expect at that point.
Below is a snippet from the immediate window which indicates what the values are: completecashname C:CashDevelopmentMyFolderoutputCASH042706.xls cashsheetname Formatted Sheet cashcurrcolumn A cashfirstrow 2 cashlastrow 876
Also the workbooks are both closed at this point (but it makes no difference)
Set CashCopy = Workbooks(CompleteCashName).Sheets(CashSheetName). _ Range(CashCurrColumn & Cashfirstrow & ":K" & Cashlastrow).Value Set PelPaste = Workbooks(completepelname).Sheets(PELSheetName). _ Range((PELCurrColumn & PELlastrow)).Value
What i'm trying to do is select a range based on the date which happens to be in the first column of the range.
For example, I have a column (A) that contains dates and column (B) that contains names.
Its easy enough to select the entire range using
Range("A1:B4").Select
I need someting that will analyse column A and conditionally selct the range based on the date in column A (ie. it will only select the rows where column A has todays date).
Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
So in my code I have two set ranges and want to select from one set range to another. The code I have now does not work because I cannot select Range("POBRF:PO"). This is the code.
[CODE] ARow = Range("A" & Rows.Count).End(xlUp).Row Set POBRF = Range("A1:A" & ARow) BRow = Range("I" & Rows.Count).End(xlUp).Row Set PO = Range("I1:I" & BRow) Range("POBRF:PO").Select [CODE/]
I am having trouble selecting a range in my data to copy to another worksheet. I have declared two variables (startcell and endcell), as seen below, as strings:
After this I would like VBA to copy all the variables in a range that is bounded by startcell and endcell. Here is what my code is currently for selecting the range:
Range("A2:" & endcell).Select
Instead of A2, I would like to select startcell, but I cannot figure out how. Currently I can get VBA to recognise endcell. For example, using the formula above I can copy the range from A2 to endcell. However, when I try and use startcell as the beginning of the range (in place of A2) the code does not work.
I have two tables in two different worksheets. In the first table, rows get deleted if the value in column 'S' (the first row to the right of the table) is not '1', and columns get deleted if the value in row '2' (third row above the table) is not '1'. In the second table, the number of columns stays always the same but rows get deleted if the value in column 'N' (first column to the right of the table) is not '1'.
After the rows and columns are deleted the tables get pasted in a ppt presentation. Now the problem: I am a beginner in VBA and up til now I am only able to define a certain Range, e.g. ("A5:M17"), to be copied and pasted into ppt. But since the tables will sometimes be bigger than other times depending if rows/columns are deleted, I would rather define a dynamic Range. The top left cell of both tabels to be copied is always 'A5' but the bottom right cell changes.
I am trying to select a range of numbers based on an active cell. I then want to sum those numbers and have that total reported to a specific cell.
For example:
Say I have a column with a list of dates (Jan/04 thru July/06). I want the user to be able to click on any given field and have that field plus the 11 fields above it summed and reported. Any help?
I came up with something like
ActiveCell.Resize(12, 1).Select
This only selects the data from the active cell and goes down...I need the opposite. I need it to select the 11 cells above the active cell (plus the active cell) and sum that data.
I am having a few problems selecting a range. What I am trying to do is select a range where the number of columns stay the same, but the rows are variable; ranging from one row upwards. At the end of the rows, there is a blank row. I currently have;
I am trying to select a range of cells. The range I need to select starts in Cell A1. I need to select every row with data in column 1 up to the first row with no data. I then need to expand the range to all columns up the last column with data, including columns with blank cells.
The problem with my code relates to the selection of columns. It is only selecting up to column F. Column G is empty, Column H has data, Columns I-J are empty, Columns K-R have data.
