I've have defined 4 names (included ranges) in a workbook. The name ranges are automatic updated by a macro. So the used rows are every time different
Now i want to paste the values what's in the range of the 4 names on a other sheet. But how?
To well know my question. I don't want to paste the 4 ranges, but the value the range has selected on that otger sheet.
I have the list below and would like to create a new list which contains only names with corresponding values and lists them.
+ A B
1 James 3
2 Derek
3 Brett 6
4 Allan
5 Jess 7
6 Sam 10
7 frank 10
The solution should look like:
+ A B
1 James 3
2 Brett 6
3 Jess 7
4 Sam 10
5 frank 10
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies View RelatedI have a workbook which contains 12 sheets, 1 for each month of the year. I also have over 100 sheets, 1 for each agent that covers their stats for each month of the year based on some of the cells from the monthly sheets.
I am trying to drag the formulas over but it will always just refer to January, instead of January and then next cell refers to the February tab, etc, etc.
I have this macro below written. It isn't working for me and I am trying to figure out how to write it. Basically, the macro is supposed to go to the test.xls workbook and then look at names in row 4, from there it will take each name and search for it on the all csrs new.xls workbook and then move over to the right 5 times and copy data and paste 1 down from the name on the test.xls workbook. One workbook has the names going to the right and the other workbook has the names going down....
View 9 Replies View Relatedi try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.
The attached file steps through the process I have in mind.
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
Unfortunately we use excel 97 in the office.
I am in need of a macro that will scan a worksheet row by row, noting the column names (found in I2 to AQ2) in a specific horizontal span of cells (I to AQ) that hold (any) data. The macro will then paste these column names in a designated cell on each corresponding row (always found in column F), separating the column names with commas.
I am trying to do this for multiple worksheets containing ~100 rows - the example attached is just a quick demo of what I'm hoping to achieve. Also, these worksheets are contained in one big workbook, so ideally I'd like to be able to run the macro once and have it apply to every sheet in that workbook (they all have the same layout - the only big difference is the number of rows). If the Total Scenes part at the bottom of the sheet is problematic in getting this to work, it's fine to remove it.
I have a worksheet that has a compilation of reports, each of which has multiple columns that aren't necessarily organized in an Excel-friendly way. However, the first column contains a list of "name" headings (titled "Name") and the second adjacent column always lists the actual name right beside it. Similarly, each person has a value heading in the first column (titled "The Value") and the actual value in the second column. What I would like to be able to do is have Excel search for the Name heading, paste the value in the adjacent column (the actual name) in a cell in a new worksheet, then search for "The Value" and do the same thing in the column adjacent to the one where the actual name was copied. The catch is I need Excel to do this and then search again for "Name", skip it, and start again with the first part of the procedure until all names and their associated values are matched. how to do something like this in VBA?
View 6 Replies View RelatedI have a couple of hundred string values in column A. I am trying to create the same number of rectangle shapes in column B, each one taking its name from the corresponding cell in column A. I keep hitting the dreaded 400 error code .
Attached File : test add shapes.xlsm
I have a spreadsheet with a series of names in a column and respective dollar values in a separate column. I would like a formula to automatically total the value spent against a particular name (without having to enter the name as a value each time).
Example
John Doe 3.89
John Doe 1.27
John Doe 0.98
Amy Smith 1.56
Amy Smith 2.29
Amy Smith 1.11
Alex Brown 0.67
Alex Brown 4.56
Alex Brown 8.87
I would like a formula to automatically populate a column, spreasheet, etc as follows:
John Doe 6.14
Amith Smith 4.96
Alex Brown 14.10
I am trying to allow for a cell selection to initiate a macro that would take the top cell in the current column and most left cell in the current row and placing those values into the names of the workbook and sheet that I want to move to.
I am tyring to allow for my users to drill down into data via selecting the cell in question that is referenced from another workbook and sheet. I want to place the value of the cell
= most left cell in current row - 1-1 to be placed in Active.sheet"1-1".select The work bood would pull the value from the most top cell in the current column and place that value in Activeworkbook.place here.select.
I'm making an excel file where I keep track of the scoring in a little competition me and my friends do with betting on sports.
However, I got a little problem trying to automate my ranking.
Naamloos.jpg
As you can see in the image, when there is a duplicate score, the name stays the same for every other same value (Joris). The formula I use (also as seen in the image) just takes the first name it comes across (from left to right) and keeps using that one. But I need it to ignore the name Joris the second time, and ignore Joris AND Tim the third time, so that every score/rank (even if the scores are a draw) has a unique name attached to it.
I have two sheets. Sheet A (Receiving Log) contains all orders with NAME (D1) and QTY ORDERED(E1). Sheet B(Component Reject Tag) contains all rejects with NAME(D1) and QTY REJECT(E1). Sheet A and B are Many to Many relationship
What I am trying to figure out is:
Match the names from Sheet B to Sheet A and sum up the QTY REJECT from Sheet B divide by the sum of QTY ORDERED for the NAME from Sheet A.
Business would like to get QTY Reject percentage by each NAME (Supplier)
In a final table lets say Sheet C I would like to see NAME, QTY Ordered, QTY Reject, Ratio in which will allow my to perform a Top 10 suppliers of highest reject percentage.
Another note to mention, Sheet C presumably to have all the formulas as in Sheet A and B will be overwritten and pasted with new data.
I am keeping a spreadsheet for an auction
We have 20 people and each person gets a total bid for 48 items.
if person1 = 55,person2 = 100,person3 = 76,person4 = 67,person5 = 49 etc.
The person's names will be in column C while values in D in cell G3 will hold the total bid for the items each week updating.
What I am trying to do is sort the table (names & values) from cell G3.
So if each week G3 total gets bigger then the table sorts to match.
If the overall total bid after 48 weeks (G3) was 52 then the table sorts with 55 on top (because it's closer) 49 next.
The closer the person's bid to the total bid the further up the table the person will be.
I have uploaded an example with before and after sample.BidExample.xlsx
Is it possible to assign values to names in a list, so that when you validate it as a drop-down list, you can select a name from the drop-down and it's corresponding value will be added to separate cell? Basically, I have survey questions which have five possible responses: Excellent - Very Good - Good - Fair - Poor. We want to assign a value to each, 5 for Excellent, 4 for Very Good and so on, so that when a response is selected from a drop-down, it's value appears in a separate cell (so that we can calculate a total and average score from the selections).
View 5 Replies View RelatedHow can I sum values with names based on a number prefix? For example, in the attached sheet, how can i sum all values that have the prefix 4.10.02.xxxx?
View 2 Replies View RelatedIs it possible to make tab names dependent on Cell Values?
I have 12 Tabs in Workbook 1
Tab 1 = "COVER PAGE"
I would like Tab 2 ='COVER PAGE'!A1
Tab 3 ='COVER PAGE'!B1
Tab 4 ='COVER PAGE'!C1
etc...
Is this possible so that I can add cells (between B1 and C1) at a later date and have all the tab names change depending on the values I put in the cells?
I want VBA to take an equation that has been entered into an worksheet cell as text and evaluate it. Here's a very simplified example that shows the concept:
Cell A1 may contain the text: "A * B + C"
I would like to do something on the order of this in VBA:
Sub Test()
Dim A As Integer, B As Integer, C As Integer
A = 2
B = 4
C = 6
MsgBox Evaluate(Workbooks("Book1").Sheets("Sheet1").Range("A1").Value)
End Sub
Obviously, this doesn't work, but I want it to show a result of 14. The actual situation is much more complex, but it all comes down to being able to evaluate the text in a worksheet and recognize the variable names that are in it.
I have created a userform in excel with a listbox that has the names of 4 different sheets located within that workbook. I would like for whenever a name of the sheet is highlighted in the listbox, that sheet is opened. I have played around with the listbox.value and if then statements and can't seem to get it to work.
View 2 Replies View RelatedI would Like to define each row in a spreadsheet to the value of the first cell in each row and I have no idea how to go about this.
Code Customer
_0888 Williams
_0435 Smith
So basiclally I would like to name the first row "_0888" being 2:2. But without doing each row manually via Insert --> Names --> Define..
My company is soon to be rolling out a new payment system, and I'd like to be able to track commission for everything I sell. Briefly, we get paid via a percentage of the company's gross profit, and the way in which the company gets paid is tiered. (the cellphone business)
So, If a customer activates a plan thats below $39.99, we get paid X amount. If it's below $59.99 we get paid Y amount, and so on and so forth, there are multiple different tiers.
What I want to do is set up a list via data validation so that I can pick what plan they have (via the name of the plan) and have it return a numerical value (ie $39.99) and also have the ability to pick text messaging, etc as options so that the workbook will add the monthly rates (39.99 + 14.95) and then have it return value for the right priceplan tier.
If this is confusing, I apologize for not being more clear, but attached is an example. The top one is what I'm actually trying to code, but the bottom is completely filled in, so you can get a more clear sense of what I'm trying to do. Honestly I'm not even sure if it can be done.
The code below looks at file names in column A and then goes to a folder and opens and copies the data in range c2 -lastrow from each file and pastes the data into sheet2.
how I could add to the code so that it also inserts the file name in column c?
It would make it easier to track the data in column B.
VB:
Sub CopyFromFile()
Dim fPath As String
Dim lRow As Long
[Code].....
I have attached a sample workbook. The list of file name is in sheet 1. An example of the output is in sheet 2. The data in column A is dummy data generally spans 100's of rows not just 10 as in the example.
The purpose of the code is to be able to put a list of file names in column a in sheet 1 and extract data from those files in a folder. The data extraction works fine. The reson for adding the file names is so that I know what file the data came from.
I have a list of over 2000 names and need to establish which names from column A appear in Column B, as well as which do not appear in column B.
I attach an example : NameCheck.xlsx
How can i make a best XI team from a list of weekly scores in my Fantasy Football league?
Players are as follows:-
One goalkeeper - Top scoring goalkeeper per week
Four defenders - Top four scorers per week
Three midfielders - Top three scorers per week
Three forwards - Top three scorers per week
I need it to find the top scoring players in the above categories and then display them in a specified area.
I also need this to happen for each individual week, NOT cumulative. literally, the highest scoring XI players, as listed above, for the present week.
which formula achieves the following:
i have a simple table design with the dates running across the row, below each row i write the name of the person on shift. in the 3rd row i mark the time they are late for work (if any).
below that in a seperate table i have a list of my staff next to that i would like there to be a running total of their lateness. I need a formular that will look for their names and then total any lateness that i have inserted. I have include a basic spreedsheet of what i want to achieve, the column in RED is where i wan the totals.
I want to delete names, formulas, macros of another workbook. For example, A.xls is my codes workbook. From this file, I want to delete the names, formulas, macros (but to keep the values & formatting in tact) of another workbook (there must be a prompt for which .xls file, the names etc. to be deleted). All files are in a same folder.
View 5 Replies View RelatedI would like to find a formula that produces Names and $values in ascending order.
Example :-
Cell a1 =John Cell b1 = $70
a2 = Bill b2 = $100
a3 = Jane b3 = $25
a4 = Frank b4 = $10
a5 = Mary b5 = $60
a6 = George b6 = $30.
ANSWER to be
Frank $10......Lowest price
Jane $25
George $30
Mary $60
John $70
Bill $100.