Could you help with an onerous task that I must complete every Quarter.
I have a spreadsheet with multiple tabs.
The first 3 Tabs are Calculation sheets and do not need to be re-named.
All the preceeding sheets each need to be renamed to the days of the month (British Format), skiping Sundays.
i.e Tab 4 should be renamed 010409, Tab 5 should be renamed 020409, Tab 6 should be renamed 030409, Tab 7 should be renamed 040409, Tab 8 should be renamed 060409 and Tab 9 should be renamed 070409 etc etc ...
Extra - Also if possible on each sheet could the Tab date be placed into Cell A4 (eg. 010409) and also the Day number (eg. 01) (Starting from 01 on 010409, 02 on 020409, 03 on 030409, 04 on 040409, 05 on 060409, 06 on 070409 etc etc ...) into Cell A6.
I have a workbook that pulls in data from other sources and contains 15 linked sheets. The data changes when different criteria is selected in the first sheet. The first 2 sheets are summary sheets and the tabs are named correctly.
I would like to be able to rename the remaining 13 tabs using labels found in the cells in the first sheet. These tabs should update or change when the first sheet is manually recalculated (F9).
I have used ActiveSheet.Name=Range("A1") but it doesn't apply in this case. Is there a macro that could run with something like Sheet1.Name=Range("A1"), Sheet2.Name=Range("A2"), Sheet3.Name=Range("A3"), etc.... or maybe something in each sheet that would change the name of the tab to a specific name off sheet 1 when the whole workbook is recalculated?
I am pulling my hair out in frustration with this right now. I have a .csv file that I am attempting to run a macro on. I will need to move between tabs, and want to rename a tab to remove the date as it is not consistent in format. I have tried numerous ways, and I don't get an error message, but the tab is not renamed either. Code I have tried is below ....
I have a workbook with multiple tabs. On sheet one a person chooses a date to initialise a formula. That date is then copied to sheet two and placed in cell D5. The date is projected out for two weeks and then the next fornight starts on sheet three and so on. The start date for each new fortnight appears in cell D5 of each sheet. I want that information to be the name of the tab for sheet two, three etc. I have put this code into the "This Workbook" section:
Private Sub Worksheet_Change(ByVal Target As Range)
' Renames all worksheet tabs with each worksheet's cell A1 contents. 'If cell A1 has no content, then that tab is not renamed.
For i = 1 To Sheets.Count If Worksheets(i).Range("$D$4").Value "" Then Sheets(i).Name = Worksheets(i).Range("$D$4").Value End If Next End Sub
I have also tried:
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$D$4" Then ActiveSheet.Name = Left(Target.Value, 10) End Sub
I then go back into sheet one and change the date and nothing happens. I seem to be missing something. Can anyone please help?
I am looking for a macro to rename tabs based on information in A1 on each tab. The thing that is causing me issues is the cell A1 has a formula in it and it changes on a daily basis with days of the week but the tab only updates when i double click A1 and press enter.
There is a folder in a shared location which many people use at work. Within this folder, I have an excel document with all current stock (called "Current Stock"). There will never be more than 20 items in current stock. There is also other documents within this folder which relate to lots of other things, Interest, Deals etc.
What I want to do is every time a new item is added to the "Current Stock" document, a tab is created with that Item name within all the other documents.
I pull an excel sheet from a database each day that gives me sales data for different products sold. The way the spreadsheet comes from the system, the first tab is named "Document Map" and lists all of the products, and each product then has its own tab but they're generically named (Sheet1, Sheet2, etc.). The name of the product is always in cell T8, but the name itself is only the last 8 characters of that cell.
What I'm hoping to accomplish with a macro is two things:
1) Retrieve the last 8 characters from T8 in each tab, and name the tab with those characters (same effect as the formula "=right(T8,8)"). 2) Ensure that this only occurs on tabs with the word "Sheet" in the beginning. Depending on the day, there could be any number of products and they each get their own tab, so I was hoping to be able to get the macro to only work on sheets where the first 5 characters are "Sheet" regardless of the number after that.
I searched a few times for the answer to my problem, using different search terms, but I've come up somewhat empty (this *might* be because I'm not up-to- speed with Excel's terminology?). Anyway, my problem is this: I have a workbook which is designed to track various data for a corporate training course ( sheets for attendance, grades, tool logins, etc). After all of these are sheets numbered 1-25 (we never have more than 25 students in a class, but usually around 20). The numbered sheets correspond to the student's number in the on the class list sheet (so, the first student would have personal "report card" information on sheet 1; the eleventh student in the class list would have their information on sheet 11, etc).
What I would like to do is have some way of putting a button on the class list sheet which would look at student list and rename the sheets to correspond to the student names. For example, if the fifth student listed was 'John Doe', it would rename his personal sheet ('5') to 'John Doe'. Obviously, I would need to do it for all of the students, and IDEALLY it would then get rid of any numbered sheets which are not used (having 21 students would only rename the first 21 sheets, but then hide sheets 22, 23, 24, and 25).
In a folder I have several text files (each text file is a customer statement) I get the files from the computer dept named randomly, I need to rename each File to its customer ID number, each ID consists of 15 characters (including the dash characters) and is found on the 3rd row of the file (3rd row , skip one character And count 15 characters ex : 0010-902514-422)
I found a code that renames the text files incrementally (1,2,3…..). I need to modify the code so that instead of renaming the files that way I rename them by their ID number (get the ID of each file while looping then rename It by that ID) One more thing, can I get the ID then skip 44 characters and attach the following 14 characters to the ID (ex : 0010-902514-422- Lebanese Pound). ttached is a folder containing an excel file with the code and 2 statements
Sub RenFile() Dim arrFiles As Variant Dim intCounter As Integer Dim datFile As Date Dim strFile As String, strPath As String strPath = ActiveWorkbook.Path arrFiles = FileArray(strPath, "*.txt") For intCounter = 1 To UBound(arrFiles) strFile = arrFiles(intCounter) Name strPath & strFile As strPath & intCounter & ".txt" Next intCounter End Sub
Private Function FileArray(strPath As String, strPattern As String) Dim arrDatabase() Dim intCounter As Integer.............................
I have groups of folders that I need to extract "Sheet2" from each workbook and assemble them into one workbook. Along the way I want to rename the sheets to the file name (-xls). I have assembled this code so far but it is broken
Sub CombineSheets() Dim sPath As String Dim sFname As String Dim wBk As Workbook Dim wSht As Variant
I have 400ish departmental budget files in a folder that I need to upload to a Sharepoint doc library. The files in the folder will have to exactly match the files we already have set up in sharepoint in order to upload them to the sharepoint site. As it stands now there is only one consistency between the sharepoint files and the budget files in the folder, which is the department number (which every file in both begins with).
I'm thinking some sort of macro will let me insert a sheet into each of the files in the budget folder, which would have a formula that pulls the department number from a certain sheet in the file, and produce the file name I want into a certain cell. Then I would like a macro that goes into each file and renames it based on that cell. I'd like to know if this is possible and if there may be a better way to do it.
I have about 200 excel workbooks in one folder, each with a different workbook name, and each workbook has one sheet, but that sheet has a different name in each workbook. I want to make the sheet name the same (sheet 1) in all the workbooks.
I want to find a way to create multiple worksheets and matching data to be placed on appropriate sheets.
Here are more details (Please check the attached sheet screenshot as well):
In a workbook, there is a "Master-Sheet". This master sheet contains 8 columns.
I want to create as many new worksheets after master sheet as the values are there in column B (Column 2 i.e. Ad Group). In above attached screenshot, there are 8 values (B2:B9 or A-H). So, I would like to create 8 new worksheets after the master sheet. Also, I want to rename them based on their value from Ad Group column.
Each newly created worksheet should have same columns as the master sheet . Same 8 columns with their name intact.
Finally, I want all matching data of the Ad Group values to be placed on their respective newly created worksheet. For example, worksheet A should have A2:H2 data. Worksheet B should have A3:H3 data, and so on.
Please note that same ad group may have more than one row data. But I don't want to create multiple worksheet of same name ad group. The worksheet should be just one, but all matching data should be placed in that one sheet.
I know it is a bit complex task, but I am sure there would be a way to perform this automatically - probably a macro.
For the last year I have been downloading cash register X1 and Z1 files onto an SD card. Each night's files (X1 & Z1) are stored in a new folder with the naming convention "RP + [DATE]", (EX: RP120910, [YYMMDD]). I have 265 folders! I need to go through each folder, select the Z1 file (I don't care about the X1, X2 or Z2 files) and rename each with the following naming convention: "Z1 + folder_name + .xls". For Example: Folder RP120910 contains the Z1 file named "Z1_T1729.ECR". After renaming, the file should be "Z1RP120910.xls". As the VBA code loops through each subfolder, selecting and renaming the Z1 files, I would like the new files to be placed into a new folder named "Z1Files". Note: All subfolders are currently in a directory named "RegisterFiles". I am using Excel 2010.
My workbook contains 13 tabs - 1,2,3,...12, and Summary
My data starts on line 4 of every sheet but varies in length - so far the longest goes to line 30.
Rows used on all 13 sheet are as follows: A - contains facility names B - contains a two or three letter code C - contains hours D - contains dollars E - contains adjusted rate
On the Summary tab I have listed all the facilites and two or three letter codes. I need to sum column "C" on tabs 1-12 when they match columns A & B on the summary tab. I have tried the following but can't get them to work:
=IF($A5=""," ",SUMPRODUCT(--('1:12'!A$4:$A$50=$A5),--('1:12'!B$4:$B$50=$B5),'1:12'!D$4:$D$50)) I did not put the  excel added that automatically I had 1:12
=SUMPRODUCT(--(THREED('1:12'!$A$4:$A$50)=A10)*(THREED('1:12'!$B$4:$B$50)=B10),(THREED('1:12'!C4:C50))) I just seen the THREED for the first time today and am not sure if this was the correct place to try but it didn't work anyway
I am looking for a macro or a formula that can give me multiple tabs, what i need is jan 01 to april 30,the next 2 books i could do by copying of course i have looked at the macros on here and no nothing about them ....
I would like this Macro to run on 6 different tabs in a worksheet as one Macro. It is currently only running on the active sheet. The tabs that I need it to run on are labeled "Totals" "New" "Used" "Service" "Parts" "Other Income-Ded"
Sub ExpenseAnalysis2012() Dim rngSource As Range Dim rngDestination As Range Set rngSource = Range("D3:E90") Set rngDestination = Cells(3, Columns.Count).End(xlToLeft).Offset(0, 2) rngSource.Copy rngDestination.PasteSpecial (xlPasteValues) End Sub
I have one tab for every month of the year plus a pivot table and summary page. Each month has 100+ products produced. In any given month the products could change, so a product could be on multiple sheets. I have used the pivot table to eliminate duplicates and create my summary sheet. Now I am trying to lookup the product description across the tabs using and if(isna(vlookup, but this does not seem to be able to handle more than a few tabs at once.
The second problem is I need to add the the production from each month for all the products produced in a year to the summary tab. I do not think the sumif function works here (or I am doing it wrong). I thought about an if(isna(vlookup +if(isna(vlookup and so on but do not think that will work either.
I am using this for my sheet =VLOOKUP(B1,master!$A$1:$C$45870,2,0)
I have added a tab "masterA" with 47K lines and a tab "masterB" with 38k lines. How do I get excell to start with master--if it does not find it there - go to masterA --and if needed go to masterB? ( checking in that order )
I have imported a table from my access database. sadly, it has over 65536 rows. I am going to have to break table down into mulitiple sheets on excel. Using a VLOOKUP formula normaly like this. =VLOOKUP(E5,MHIFUPK,5,0)
where E5 is my target,MHIFUPK is the sheet with the table array, and 5 is the price of E5. Now I will have multipe sheets, and I need to be able to refreance all of them in order to find E5. Anyway to do this besides upgrading to 2007, (wish I could get the company to upgrade)