Add Values Across Multiple Tabs

Feb 26, 2013

I trying to use the formula below to add values across multiple tabs but I am getting a value error. I think it is just a small punctuation thing.

=SUM(INDIRECT("'"&REF!$A$2:$A$3&"'!&$F$62"))

REF is the name of my references tab and has a list of the tab names

View 1 Replies


ADVERTISEMENT

Macro To Transform Formulas Into Values Across Multiple Tabs

Feb 7, 2014

I have never written a macro and when I record one I usually have trouble with the relative references.

I am trying to write a macro to transform formulas into values every month.

I want to transform formulas:

- across a range of tabs: each tab is exactly alike and is named page-1 to page 25
- on a different column every month (same column across all tabs)
- on the same rows: L168 to L227 and L266 to L277 (same rows across all tabs)

View 6 Replies View Related

Create Multiple Sheet Tabs From Multiple Cells

Jun 22, 2006

Is it possible to make multple worksheets from a selection of multiple cells?

This would mean a selection of 10 cells would generate 10 sheets titled with the cell conent.

View 14 Replies View Related

Sum Across Multiple Tabs, Multiple Criteria

Aug 26, 2009

Excel 2007

My workbook contains 13 tabs - 1,2,3,...12, and Summary

My data starts on line 4 of every sheet but varies in length - so far the longest goes to line 30.

Rows used on all 13 sheet are as follows:
A - contains facility names
B - contains a two or three letter code
C - contains hours
D - contains dollars
E - contains adjusted rate

On the Summary tab I have listed all the facilites and two or three letter codes. I need to sum column "C" on tabs 1-12 when they match columns A & B on the summary tab. I have tried the following but can't get them to work:

=IF($A5=""," ",SUMPRODUCT(--('1:[12]12'!A$4:$A$50=$A5),--('1:[12]12'!B$4:$B$50=$B5),'1:12'!D$4:$D$50))
I did not put the [12] excel added that automatically I had 1:12

=SUMPRODUCT(--(THREED('1:12'!$A$4:$A$50)=A10)*(THREED('1:12'!$B$4:$B$50)=B10),(THREED('1:12'!C4:C50)))
I just seen the THREED for the first time today and am not sure if this was the correct place to try but it didn't work anyway

View 9 Replies View Related

Create New Tabs From Values In A Cell

Feb 10, 2014

I have a large spreadsheet and want to sort by Column "L" and copy all the rows where Column L has the same value into a new tab named with the value in Column L.

View 2 Replies View Related

How Can I Do A Chart That Spans Values In Different Tabs?

Sep 9, 2009

I need to create a chart that will show month over month sales for different channels. But each month total is in a separated tab in the same file.

Example:

August totals
Channel Sales
Channel 1 $1000
Channel 2 $2000
Channel 3 $500

I need a chart that will show sales for Channel 1 ,2 and 3 from jan to aug.

View 8 Replies View Related

Print Multiple Tabs?

Dec 22, 2008

I have 3 sheets in the same workbook that I want to print in 1 PDF report, is there a way that I can do this?

View 2 Replies View Related

Can Multiple Tabs Be Grouped Together?

Nov 29, 2009

I have an Excel file with 70+ tabs and was wondering if there was some way to group them together, short of just making separate worksheets.

View 6 Replies View Related

Producing Multiple Tabs

Feb 22, 2010

I am looking for a macro or a formula that can give me multiple tabs, what i need is jan 01 to april 30,the next 2 books i could do by copying of course i have looked at the macros on here and no nothing about them ....

View 14 Replies View Related

Macro Needs To Run On Multiple Tabs

Mar 13, 2012

I would like this Macro to run on 6 different tabs in a worksheet as one Macro. It is currently only running on the active sheet. The tabs that I need it to run on are labeled "Totals" "New" "Used" "Service" "Parts" "Other Income-Ded"

Sub ExpenseAnalysis2012()
Dim rngSource As Range
Dim rngDestination As Range
Set rngSource = Range("D3:E90")
Set rngDestination = Cells(3, Columns.Count).End(xlToLeft).Offset(0, 2)
rngSource.Copy
rngDestination.PasteSpecial (xlPasteValues)
End Sub

View 2 Replies View Related

Sumif Over Multiple Tabs?

May 21, 2012

How can I sumif over multiple tabs?? Without using sumif(a:a,sheet1!a1,c:c)+sumif(a:a,sheet2!a1,c:c)

Like sumif(sheet1:sheet2!a:a,a1,sheet1:sheet2!c:c) I do not want to use a macro. I have about 80 sheets.

Sheet1
Apples 93
Pears 49
Oranges 20
Bananas 35

Sheet2
Apples 100
Pears 13
Oranges 2
Bananas 350

View 8 Replies View Related

AVERAGEIF Across Multiple Tabs

Dec 3, 2012

How can I do

=AVERAGEIF(AZ6:AZ1721,">0",AZ6:AZ1721)

But across 18 tabs all with the same ranges???

View 3 Replies View Related

VLookup Across Multiple Tabs

May 13, 2014

I have one tab for every month of the year plus a pivot table and summary page. Each month has 100+ products produced. In any given month the products could change, so a product could be on multiple sheets. I have used the pivot table to eliminate duplicates and create my summary sheet. Now I am trying to lookup the product description across the tabs using and if(isna(vlookup, but this does not seem to be able to handle more than a few tabs at once.

The second problem is I need to add the the production from each month for all the products produced in a year to the summary tab. I do not think the sumif function works here (or I am doing it wrong). I thought about an if(isna(vlookup +if(isna(vlookup and so on but do not think that will work either.

View 9 Replies View Related

Rename Multiple Tabs ...

Apr 4, 2009

Could you help with an onerous task that I must complete every Quarter.

I have a spreadsheet with multiple tabs.

The first 3 Tabs are Calculation sheets and do not need to be re-named.

All the preceeding sheets each need to be renamed to the days of the month (British Format), skiping Sundays.

i.e Tab 4 should be renamed 010409, Tab 5 should be renamed 020409, Tab 6 should be renamed 030409, Tab 7 should be renamed 040409, Tab 8 should be renamed 060409 and Tab 9 should be renamed 070409 etc etc ...

Extra - Also if possible on each sheet could the Tab date be placed into Cell A4 (eg. 010409) and also the Day number (eg. 01) (Starting from 01 on 010409, 02 on 020409, 03 on 030409, 04 on 040409, 05 on 060409, 06 on 070409 etc etc ...) into Cell A6.

View 6 Replies View Related

Vlookup With Multiple Tabs

Aug 21, 2009

I am using this for my sheet =VLOOKUP(B1,master!$A$1:$C$45870,2,0)

I have added a tab "masterA" with 47K lines and a tab "masterB" with 38k lines.
How do I get excell to start with master--if it does not find it there - go to masterA --and if needed go to masterB? ( checking in that order )

View 9 Replies View Related

Vlookup On Multiple Tabs

May 21, 2007

I have imported a table from my access database. sadly, it has over 65536 rows. I am going to have to break table down into mulitiple sheets on excel. Using a VLOOKUP formula normaly like this. =VLOOKUP(E5,MHIFUPK,5,0)

where E5 is my target,MHIFUPK is the sheet with the table array, and 5 is the price of E5. Now I will have multipe sheets, and I need to be able to refreance all of them in order to find E5. Anyway to do this besides upgrading to 2007, (wish I could get the company to upgrade)

View 2 Replies View Related

Retrieving And Listing Values From Series Of Tabs

Jul 31, 2012

I have a series of tabs in my sheet, the first one is called 'START', the last one 'END', and between them a series of other identical sheets ('Division 1', 'Division 2'... etc). In each of the 'Division' tabs, cell A1 (say) contains a string that I need to retrieve and order into a list on a summary sheet. The order doesn't really matter (i.e. it doesn't have to be alphabetical or anything), though it would be useful if there were no gaps in the list.

View 1 Replies View Related

Getting Website Data - Multiple Tabs

Mar 8, 2013

I've only recently ventured into the VBA scripting and am finding it quite exciting. After doing some trivial stuff, I'm trying to work with websites. Currently, I'm trying to pull data off of a website which poses a form which has to be filled first. I've been successful in filling the form and clicking submit, through the code, but the site opens the results in a separate tab in IE. I am unable to make it go to that tab and copy-paste data from there.

Secondly, instead of just blindly copy pasting, it would be better if the data is pasted in a more readable format (as on the website). The following code is plainly copying and pasting the data as-is and hence rendering it unreadable:

VB:
.ExecWB 17, 0
.ExecWB 12, 2
.PasteSpecial Format:="Text", link:=False, DisplayAsIcon:=False

View 1 Replies View Related

Naming Multiple Tabs Sequentially

May 19, 2008

We have these worksheets that have 100 tabs each
each tab is named joel_1400, joel_1401...Joel_1499 insert data in each tab template as needed for RFI's. then we have to make another worksheet with 100 tabs for 1500 to 1599

what we are doing is copying the whole worksheet and then erasing all of the user fields and changing all of the names manually for each tab

View 14 Replies View Related

Importing Data From Multiple Tabs

May 6, 2009

I have an excel spread sheet with about 300 tabs. each sheet has the same column fields..I need to pull certain column fields ( the same fields ) out of each tab and export them to another spread sheet.

View 6 Replies View Related

Formula Referencing Multiple Tabs

Sep 8, 2009

I'm a bit over my head on this one. I want a formula that does the following: Look at the date I put in on the last tab and find the correct date on the other tabs. Using that date as the column I want it to return the correct row for the data.reference.

I am using the HLOOKUP function. I'm not even sure this is the right function. Ont the workbook attached I'm trying to get the data on the Totals tab to come from the Sept Wk 1 through Sept Wk 5 tabs. The formula I tried to use is on the Totals page C7.

View 3 Replies View Related

Sum On Multiple Tabs + Refer To Specific Tab

Dec 13, 2009

I have a workschedule in excel.

It has a tab for every week in a year so 52 in total. The first tab is supposed to give some general information. I have a few questions on how to implement things.

1 i wanna be able to view the Total amount hours worked in my current week.

I calculate the current workweek using:

View 6 Replies View Related

Multiple Rows Of Sheet Tabs?

Aug 15, 2013

I have a lot of sheets, in my workbook. It keeps expanding, as I add them. How do I make multiple rows of sheet tabs, to keep from having to scroll across all the time?

View 4 Replies View Related

Summary Page For Multiple Tabs

Jan 28, 2014

I have multiple tabs with information in the same cells on each tab (each tab is a different product). Is there an easy way of pulling this information for each tab onto a summary page?

View 4 Replies View Related

Multiple Tabs Consolidated Into One Master?

Mar 21, 2014

I have three months that people fill out on separate sheets. I would like to use a macro to place the contents only from a certain amount of columns to as many rows as it takes (not blank).

Contents Multiple Sheets.xlsm

View 4 Replies View Related

Spreadsheet With Multiple Tabs, Same Headers

Sep 9, 2005

I have a spreadsheet with multiple sheets, which can vary from project to
project, and they all have the same center sections of the headers. Is there
any way to automate the filling in of all these headers based on the first
sheet?

View 6 Replies View Related

Macro For Multiple Tabs From A Data Set

Sep 10, 2007

I'm not very good with macros and I need to create a macro that copies data from one excel worksheet into multiple other worksheet tabs in the same workbook. I have 8 columns and thousands of rows of data. The spreadsheet is sorted by column E.

In column E, there are about 25 different values going down throughout the spreadsheet. I would like the data for each of these Column E categories to be copied over to a new tab in the spreadsheet with the tab name as the value in E. So in the end there would be the main tab, and then 25 new tabs with the filtered data. Does anyone already have a macro that will do this?

View 9 Replies View Related

Recursive Formula For Multiple Tabs

Oct 24, 2008

I'm trying to come up with a Macro that once it see's the word "Rolls" in column M, I would like for it to go to the row below the word and divide the information on column K by 30
then for it to perform this formula for the next 17 rows and on the last row have the cell in gray color.

Then for it to keep doing this recursively down the column of the sheet and once finished to go to the next tab and do the same algorithm(there's like 40 tabs !!)

View 10 Replies View Related

Combining Information From Multiple Tabs

Jul 19, 2006

I have an excel file that contains 93 tabs, all with the
same type of information, and I need to take the information from each
tab and combine it so that it has all the information from all 93 tabs
in one.....without having to copy and paste each tab,

View 12 Replies View Related

Adding Cells From Multiple Tabs

Nov 3, 2008

Let me explain this as best I can:

I have an excel file with multiple tabs on it. Each tab has the exact same format with different numbers. On the last page I want to add cells from each tab and have the sum go to a cell on the last tab.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved