Radio Button Transparency Lost When Clicked, How To Remedy
Jan 23, 2009
I have a form (worksheet with controls embedded in) and the form changes color depending on what the user clicked, problem is that button colors and cell pattern colors don't quite match.
thought I solved it by making the buttons backstyle = transparent.
However, as soon as radio button was clicked, transparency was lost.
I have named the range of the form "FormGround" so that when Service 1 is select, the Form turn a different colour. I have my subsequent buttons change to that same color as well (using the cell's color index number.
View 4 Replies
ADVERTISEMENT
Nov 25, 2008
I have a chart that's being updated with different values when I cklick on different radiobuttons. When the cells that the radio button refers to is empty or the calculation in the cell have an error it pops up a message that I need to click OK to go on. Is there a way to stop these alerts by writing a script that shuts the alert messages off during each click?
View 2 Replies
View Related
Feb 22, 2008
I'm making a worksheet where the user has the options to select "yes" or "no". I used active x radio buttons because I feel they are more flexible. The problem I'm running in to is, what happens if there is an "unknown"? I can't find a way to "deselect" a radio button?
I tried using 2 checkboxes using the following
Checkbox 1:
If CheckBox2.Value = True Then
CheckBox1.Value = False
End If
Checkbox2:
If CheckBox1.Value = True Then
CheckBox2.Value = False
End If
The problem with this is, you have to deselect one checkbox before you can select the other. It works, but it’s a little more cumbersome then I was hoping. Is there a better solution?
View 9 Replies
View Related
Feb 18, 2014
When I select the binoculers by project the window we are disucssing with the radio button comes up (after the project number is added and sendkey to select filter - only shows one radio button). Attached is the source code of the original window and a snapshot of what it looks like.
First window - I currently have the code going to the project area (where we cannot type anything) then using sendkey to tab and enter to select the binoculers.
New window - only one radio button shows after you type a project number than hit filter.
First Window.xlsm
Original Window source code.txt
new window.xlsx
New window radio source code.txt
View 4 Replies
View Related
Nov 17, 2008
I am looking at designing a simple radio button system which allows me to fill an adjacent cell with values from a certain column - so in the example, column C is the total value, and columns D-F will ideally have a radio button which a user can just click to select the value.
View 4 Replies
View Related
Oct 11, 2009
I have a Userform (frmData) with 4 CommandButtons (Cmd1, Cmd2 etc) and also 2 RadioButtons (Opt1 & Opt2).
I want Opt1 to be the default selection when frmData is opened.
If Opt1 or Opt2 is selected I want that option to stay selected until frmData is closed.
When Cmd1 is selected code1 runs if Opt1 is ticked, and Code2 if Opt2 is selected.
View 6 Replies
View Related
Mar 16, 2012
I have code in my macro that outputs a radio button for every project that is entered into the database. All radio buttons are part of the same group. I know how to give the radio button an caption name but I do not know how to give the radiobutton an actual name that I can call to. How can I do this in excel macros?
View 9 Replies
View Related
Sep 13, 2012
I am using the developer tools and have created a set of radio buttons that work fine.
On the same worksheet and tab I have created a second set of radio buttons but all the radio buttons are grouped as the same set.
How do I define the second group as a second group?
View 2 Replies
View Related
Feb 17, 2014
VBA code for go to next sheet using radio button.
View 1 Replies
View Related
Jul 21, 2014
Within a worksheet, I have several radio buttons, allowing the user to select only one of them. Using VBA, how do I recognize which radio button the user selected?
View 1 Replies
View Related
Jan 7, 2010
I have created a survey in excel 2003. It has 70 questions on it and the user responds to the questions by clicking on a radio button. There are 4 radio buttons within a group box for each question and the user will select one of them.
At the end of 'sheet 1' with all these questions on, i have a button which the user presses to proceed to 'sheet 2'. When they press the button i want to ensure is that all questions have been answered ie: 1 of the radio buttons is selected for every question.
If one of the questions isnt answered then a pop up box will appear to tell the user they have unanswered questions and then the vba code will exit and the user stays on the question sheet (sheet 1). If all the questions are answered then the user will move to 'sheet 2'. (the reference cells for all the groups of radio buttons are within column G on sheet 1).
View 3 Replies
View Related
Sep 17, 2012
I have an issue with a combo box and radio button.
Anytime I click on either of them, they reduce in size.
It's as if it is reducing by the same ratio every time until you can't click on it anymore.
View 3 Replies
View Related
Jul 31, 2008
I am building a form and want to display (or activate) a drop down list only when an radio button is active. I have 4 radio buttons and want to link to to 4 different drop downs. But only have the drop downs active if the button is clicked.
View 9 Replies
View Related
May 19, 2009
how to disable combobox on radio button click in excel macros'
I have 2 radio buttons: optionbutton1 and optionbutton2 and two comboboxes: Combobox1 and Combobox2.If i select 1st radio button 2nd combobox should be disabled.Vise versa
View 9 Replies
View Related
Dec 17, 2009
I'm trying to create a form using radio buttons from the "Forms Tool Bar" and not sure I shouldn't be using the "Control Tool Bar"
I've got multiple buttons and wanted to group them so i used the "Group Box" from the Forms tool bar but now there's a box around the buttons (I've turned off Printing for the box) that gets in the way of other text on sheet. I did some searching and thought I read where you could also use the drawing tool bar and draw a rectangle around the buttons which would then let them operate independent of other groups of buttons but that doesn't seem to work so I'm guessing I imagined it. I also noticed that if you don't draw the "Group Box" around the hole radio button box, they don't work with others in the same "Group Box"
I'm not sure if I should use the buttons in the "Control Tool Bar" but I'm thinking I should so that I have the flexibility should I decide to do something different in the future. I'm thinking about using the buttons to hide a sheet as well as select the sheet for printing, but for now one hurdle at a time.
Lastly I tried looking up some information on how to get the "Control Tool Bar" radio button to behave similar to the "Forms" version of the button (i.e. click the button and it appears to alternate from other buttons in the group), however when I place my mouse over the button it selects it rather than letting me change it's state from true to false.
View 8 Replies
View Related
May 27, 2014
I have a userform for inputting information to a spreadsheet using the code below. It works fine however if the user does not select a radio button to select a score its saving the rest without it. How can I ensure the user selects a score,,,, ob10, ob8, ob6, ob4, ob2, obna.
[Code] ......
View 2 Replies
View Related
Mar 13, 2014
I have an excel file containing 50 sheets which we use as an accreditation test. Each sheet contains one question to which there are several possible answers. These answers (for example, A, B, C and D) are option buttons and when a user selects one, that selection is recorded as their response which is then marked. After answering a question they click a NEXT button to move on and as they move on the previous sheet (question) is hidden so they only ever see the current question sheet.
This has worked well for us for a few years, but we have just noticed some odd behaviour on ONE SPECIFIC sheet. The option button the user selects on that sheet (it is actually question 13 in the sequence) is not stored after the test is completed. However on every other sheet, the selection is stored fine - just this one sheet. The properties of all objects on the rouge sheet are the same as the other sheets. I have duplicated a working sheet and tried replacing the question 13 sheet to try that, but the problem persists.
I tried deleting that Q13 sheet and running the test without it and the same problem occured but this time on the preceeding sheet (question 12) which suggests it is not the actual sheet that is causing the problem.
This is the vb code we have on each sheet
Option ExplicitDim Response As StringDim q13 As IntegerPrivate Sub cmdQ13_Click()    q13 = 0
If optq13a.Value = False And optq13b.Value = False And optq13c.Value = False And optq13d.Value = False Then
Response = MsgBox("You must answer Question 13 by selecting one of the options!", 16, "More Information Needed !")       Â
[Code] .....
So in this example there are 4 option buttons and 1 command button. It is no different to the other 49 sheets
View 2 Replies
View Related
Aug 7, 2006
I have a spreadsheet with a variable number of xlButtonControl type form controls. The actual number of buttons depends on the amount of data that the spreadsheet is being asked to summarise. All the button controls use the ".OnAction" property to point execution on click to a common procedure.
Unfortunately that much is what it is and is beyond my control, so I just have to work with that.
What I would like to know is if there is a property or method I can access from within the common OnAction procedure that enable me to identify which button was pressed. If this was a CommandBar environment I would use the ActionControl property. Since it's not, and since I can't change it (not even to use ActiveX controls!), does anyone know an equivalent that I can use in this case?
View 4 Replies
View Related
Mar 14, 2009
I have a worksheet (attached) that lists various clients in columan C. Column E lists whether each of the clients listed in Column C are 'Existing Business' or 'New Business'. I require a user form that has three radio buttons (one to select 'New Business', another for 'Existing Business' & one for 'All').
When Selecting a radio button, (e.g. 'Existing Business'), I need all clients listed in Column C of the worksheet that also have 'Existing Business' in Column E to be listed in a ListBox on the UserForm (with the second radio button allowing the text box to list 'New Business' and the third to list both Existing and New).
View 3 Replies
View Related
Oct 4, 2011
I have several buttons which, when clicked, pull up a range of data from another tab. Each button repopulates the appropriate cells with its specific data. I need to have an identification of which data set I'm currently viewing so was considering having the button, when clicked, change color or background/lettering colors swap, etc, until another button is clicked, then it changes color and the original button returns to the standard format. Is this possible? What type of button do I need to use?
View 1 Replies
View Related
Mar 19, 2013
Is there a way in VBA to reference the activeX button which has been clicked? Like a ThisWorkbook equivalent for a button?
I have quite a few button whereby they set a parameter for a procedure 'TrendData' based on the row they sit in. Currently I just have the row number hard coded i.e. Call TrendData(5) but I want to amend this so that when I add a row it doesn't offset all my buttons.
For Example
Call TrendData(CommandButton3.TopLeftCell.Row)
However instead of typing CommandButton3, CommandButton4, etc. I would like the code to know which button had been clicked and just use that?
View 9 Replies
View Related
Jul 29, 2008
There was a similar question I found answered in the archives. However the solution given there (using ActiveSheet.Buttons(Application.Caller).TopLeftCell.xxx) does not work in my case.
A little googling and I think the reason is that I added my buttons from the toolbar and not from the forms editor. My buttons are in the OLEObjects collection, not in Buttons.
So how do I determine which of my OLEObjects was clicked? Is there something similar to "Application.Caller"?
View 9 Replies
View Related
Jan 30, 2009
I need a code for "click-able button" in my excel sheet that will call makro "copy" which I have connected with ThisWorkBook /Sub copy() .../ or in other case with Modules (module 7 for example).
So, what to add between this:
Private Sub CommandButton1_Click()
?
End Sub
View 9 Replies
View Related
May 3, 2005
Sub Mainscoresheet()
Dim k As Integer, i As Integer, cs As Integer
Set b = ActiveSheet.Buttons(Application.Caller)
With b.TopLeftCell
cs = .Column
End With
I have a button assigned to this macro about 20 times all over my worksheet
I will place the button in dirrerent locations. What I need to do is get the column that the top-left corner of the button and assign that to "cs".
Example if the top left corner of the button is in column "F" then cs would be 6.
View 9 Replies
View Related
Aug 1, 2006
I have two custom toolbar buttons. I want to disable one of them until the second will be pressed (sorry for my english).
View 3 Replies
View Related
Dec 11, 2006
I have a form with two buttons, one is to start downloading, one is to stop it, a sub is called when start buuton is clicked, there is a DO LOOP, I hope the DO LOOP stop when I clicked STOP button,
View 9 Replies
View Related
Aug 22, 2013
I have a command button that when pressed I would like the name written on it and colour to change
View 2 Replies
View Related
Jan 24, 2007
I can't find a way to reset/clear the textbox in order to enter new data
View 2 Replies
View Related
Feb 1, 2008
Currently I have 5 identical command buttons which do something similar but in a different cell.
What i want to do is sum up the 5 different task using a single command button.
When cmdaddsp1 is clicked the first time cell "B4" is populated with a value from a table.
When cmdaddsp1 is clicked a second time cell "B5" is to be populated with a value from a table.
When cmdaddsp1 is clicked a third time cell "B6" is to be populated from the table,
and so forth.
Is there a loop or anything that can be used for this? I only want other cells to be populated when the command button is pressed.
View 9 Replies
View Related
Oct 19, 2008
i want to create a button in excel worksheet that when clicked copy values from a column (say A1 to A25) and store it so that it can be copied to word file or notepad or even in other excel worksheet. so i think i need a macro for this or it can be done by writing VBA Code.
View 9 Replies
View Related
