Determining Button Clicked
Aug 7, 2006
I have a spreadsheet with a variable number of xlButtonControl type form controls. The actual number of buttons depends on the amount of data that the spreadsheet is being asked to summarise. All the button controls use the ".OnAction" property to point execution on click to a common procedure.
Unfortunately that much is what it is and is beyond my control, so I just have to work with that.
What I would like to know is if there is a property or method I can access from within the common OnAction procedure that enable me to identify which button was pressed. If this was a CommandBar environment I would use the ActionControl property. Since it's not, and since I can't change it (not even to use ActiveX controls!), does anyone know an equivalent that I can use in this case?
View 4 Replies
ADVERTISEMENT
Oct 4, 2011
I have several buttons which, when clicked, pull up a range of data from another tab. Each button repopulates the appropriate cells with its specific data. I need to have an identification of which data set I'm currently viewing so was considering having the button, when clicked, change color or background/lettering colors swap, etc, until another button is clicked, then it changes color and the original button returns to the standard format. Is this possible? What type of button do I need to use?
View 1 Replies
View Related
Mar 19, 2013
Is there a way in VBA to reference the activeX button which has been clicked? Like a ThisWorkbook equivalent for a button?
I have quite a few button whereby they set a parameter for a procedure 'TrendData' based on the row they sit in. Currently I just have the row number hard coded i.e. Call TrendData(5) but I want to amend this so that when I add a row it doesn't offset all my buttons.
For Example
Call TrendData(CommandButton3.TopLeftCell.Row)
However instead of typing CommandButton3, CommandButton4, etc. I would like the code to know which button had been clicked and just use that?
View 9 Replies
View Related
Jul 29, 2008
There was a similar question I found answered in the archives. However the solution given there (using ActiveSheet.Buttons(Application.Caller).TopLeftCell.xxx) does not work in my case.
A little googling and I think the reason is that I added my buttons from the toolbar and not from the forms editor. My buttons are in the OLEObjects collection, not in Buttons.
So how do I determine which of my OLEObjects was clicked? Is there something similar to "Application.Caller"?
View 9 Replies
View Related
Jan 30, 2009
I need a code for "click-able button" in my excel sheet that will call makro "copy" which I have connected with ThisWorkBook /Sub copy() .../ or in other case with Modules (module 7 for example).
So, what to add between this:
Private Sub CommandButton1_Click()
?
End Sub
View 9 Replies
View Related
May 3, 2005
Sub Mainscoresheet()
Dim k As Integer, i As Integer, cs As Integer
Set b = ActiveSheet.Buttons(Application.Caller)
With b.TopLeftCell
cs = .Column
End With
I have a button assigned to this macro about 20 times all over my worksheet
I will place the button in dirrerent locations. What I need to do is get the column that the top-left corner of the button and assign that to "cs".
Example if the top left corner of the button is in column "F" then cs would be 6.
View 9 Replies
View Related
Aug 1, 2006
I have two custom toolbar buttons. I want to disable one of them until the second will be pressed (sorry for my english).
View 3 Replies
View Related
Dec 11, 2006
I have a form with two buttons, one is to start downloading, one is to stop it, a sub is called when start buuton is clicked, there is a DO LOOP, I hope the DO LOOP stop when I clicked STOP button,
View 9 Replies
View Related
Aug 22, 2013
I have a command button that when pressed I would like the name written on it and colour to change
View 2 Replies
View Related
Jan 24, 2007
I can't find a way to reset/clear the textbox in order to enter new data
View 2 Replies
View Related
Feb 1, 2008
Currently I have 5 identical command buttons which do something similar but in a different cell.
What i want to do is sum up the 5 different task using a single command button.
When cmdaddsp1 is clicked the first time cell "B4" is populated with a value from a table.
When cmdaddsp1 is clicked a second time cell "B5" is to be populated with a value from a table.
When cmdaddsp1 is clicked a third time cell "B6" is to be populated from the table,
and so forth.
Is there a loop or anything that can be used for this? I only want other cells to be populated when the command button is pressed.
View 9 Replies
View Related
Oct 19, 2008
i want to create a button in excel worksheet that when clicked copy values from a column (say A1 to A25) and store it so that it can be copied to word file or notepad or even in other excel worksheet. so i think i need a macro for this or it can be done by writing VBA Code.
View 9 Replies
View Related
Mar 1, 2007
I am looking to create a form that when a user enters data in it, and clicks a save button it will submit that data into cell A2, and then with the next time the enter data it will submit that data to cell A3. I would like it to continue moving down a cell each time somone hits a "submit" button.
View 6 Replies
View Related
Mar 2, 2014
code to pull a hidden frame when I click a command button. I have Uploaded a Sample worksheet on my requirement.
View 4 Replies
View Related
Jan 23, 2009
I have a form (worksheet with controls embedded in) and the form changes color depending on what the user clicked, problem is that button colors and cell pattern colors don't quite match.
thought I solved it by making the buttons backstyle = transparent.
However, as soon as radio button was clicked, transparency was lost.
I have named the range of the form "FormGround" so that when Service 1 is select, the Form turn a different colour. I have my subsequent buttons change to that same color as well (using the cell's color index number.
View 4 Replies
View Related
May 18, 2009
I am having difficulty finding information on coding my spin button on a user form. I searched and haven't found any information. I need to do is code a spin button to increase or decrease by 1 each time it is clicked up or down. I would like it to populate to a text box on my form if that is possible.
View 3 Replies
View Related
May 10, 2014
I currently have a small userform placed at the bottom right of the screen (with a command button on it) and this opens up on top of excel instances and other applications/windows and it is set so that you can't interact with anything except the userform.
I wanted to minimize the userform and give focus to immediate next window (can be excel or non excel applications) for 10 seconds and then activate/show the userform back again, when the "Button 1" on the userform is clicked.
I tried hiding the userform, but this doesn't give focus to the immediate next window. Below is the code
Private Sub Button_Click()
Me.Hide
PauseApp (10)
Me.Show
End Sub
I could only find answers for adding minimize and maximize buttons to userform.
When the button is clicked, it should perform
Step a - Minimize the userform
Step b - Give focus to the next immediate window behind the userform
Step c - Wait for 10 seconds
Step d - Bring back the userform its to state.
View 2 Replies
View Related
Apr 18, 2007
Can a event be triggered when the Visaul Basic Editor command button is clicked in Excel?
View 9 Replies
View Related
May 8, 2012
I have a userform that has a combobox in it that also has an OK button and a Cancel Button. Need getting the combobox to pull in the correct list? The data for this list will be in cells A2 through A16. But not all 15 lines will always have data in them so I'd like to only show the ones with data. Then next issue i have is I would like the OK button on this userform to actually erase the data the user has clikced on in the combobox. It's a list of kids that the userform is asking which one needs to be deleted. So it might be the kid in cell A9. so when the user clicks on that kid in the combobox form a9 and hits ok I'd like to have all the kids below A9 move up one row.
Windows XP
excel 2003
View 6 Replies
View Related
Jan 10, 2007
What in the world did I do now? When I click on any cell, the cursor turns into a thick "+" . Then, when I move my mouse up and down the spreadsheet, all the cells the "+" touches become highlighted.
View 9 Replies
View Related
May 13, 2014
I've got a formula which makes a word "Order" (column B) meet the closest value of 35.00 (column A)
How to modify the formula so that ''Order" meets the closest value of 35.00 in the range (>=35;<39) throughout the column?
There are about 20 approximate and precise values of 35.00 in the column A which have to be met by "Order".
I've been trying to change the value comparisons and precisity (pecentage) to set up the range from 35.00 till 39.00.
but encountered a problem that "Order'' often meets two closest values of 35 till 39, often one of them is going under 35.00 e.g. 36.50; 34.00.
Consequently how to change/substitute the formula, parameters, value comparisons etc. to meet the requirements!
See the workbook attached. 13_05_det_closest_value.xlsx‎
View 2 Replies
View Related
Apr 3, 2007
What code can i use to determine the same rows in 2 different columns and compare the data in those two cells?
View 9 Replies
View Related
Aug 22, 2014
I have a document in which I am trying to determine the length of time between a start date & time and a finish date & time. The format of the time/date cells is
mm/dd/yy hh:mm:ss
Basically, I am just subtracting the first cell from the second. This works fine as long as both dates are in the same day, such as
START FINISH ELAPSED
08/20/14 23:42:22 08/20/14 23:43:59 0:01:37
However, if I have a situation such as
START FINISH
08/18/14 23:00:15 08/19/14 0:03:22
the ELAPSED cell fills with ######## with a tooltip stating that "dates and times that are negative or too large display as ######." The actual result in this example should be 1:03:07.
How do I get consistency amongst my resulting formulas?
View 6 Replies
View Related
Nov 25, 2013
I am trying to figure out a simple formula on determining class for students according to their achievement /grades. There are 9 classes altogether ( 7A, 7B, 7C, 7D, 7E, 7F, 7G, 7H and 7J). There are three columns for subject ( MATHS, ENGLISH, SCIENCE). So lets say the student get Grade A, A , A : The student will belong to Class 7A.
As attached.. TEST PSR.xls‎
View 2 Replies
View Related
Apr 22, 2009
My question is about determining whether or not a particular letter is uppercase.
I've written code that reads from a text file one character at a time. And I know that the following determines if each character is equal to the letter "a".
View 7 Replies
View Related
Jun 11, 2009
I try to do the following I get an error 'Subscript out of range'
View 3 Replies
View Related
Dec 15, 2008
I am trying set up my spreadsheet so that when a number is put into one column. The next column is filled with a number that will correspond to the other number specified from a range of data.
Distance Sheet no.
55
68
93
135
186
So in the sheet No. column I want it to read the number in the Distance and put in the Corresponding sheet number.
So if:
Sheet 1 is : a distance of 1 though 20
Sheet 2 is : a distance of 20 though 40
Sheet 3 is : a distance of 40 though 60
Sheet 4 is : a distance of 60 though 80
Sheet 5 is : a distance of 80 though 100
Sheet 6 is : a distance of 100 though 120
Sheet 7 is : a distance of 120 though 140
Sheet 8 is : a distance of 140 though 160
Sheet 9 is : a distance of 160 though 180
Sheet 10 is : a distance of 180 though 200
How can this be automated without writing a ton of nested if statements.
This is an example but in reality I have 29 "sheets" with different ranges to separate.
View 2 Replies
View Related
Mar 31, 2009
I have about 20 files with check posting dates stretched over several years. Maybe a million checks total. The company uses 13 four week periods each year, not a calendar month/year. I need to look up each posting date and attach the correct period to it.
I could do a VLOOKUP with one row for each day of the year, but that would require 2 x 365 row's for just two years. There must be a more elegant way, maybe using an array or some IF statement.
Attached is a sample file, xlsx, with the perior/year info and sample posting date info. Can someone point me in the right direction so that I end up with the correct period/year in column 'C' for the applicable posting date?
View 4 Replies
View Related
Jun 3, 2009
There are a lot of worksheets with a lot of similar data from which I have to determine the threshold. So if possible I would like to create a macro.
I want to know the threshold value when Y=2.
The threshold can be between different Input Values (=Stimulus Intensity (µA)).
For example: the threshold of amp P2-N1 & P3-N3 lies somewhere between 200 and 252µA. The threshold of P1-N1 lies somewhere between 318 and 400µA.
Is it possible to determine the threshold value with a formula?
View 14 Replies
View Related
Dec 9, 2011
The table I'm trying to query contains the beginning and end date the data is effective. The end date seems to always be either 27 or 34 (4 or 5 weeks) after the start date.
This is the table I'm trying to query:
[URL]
I want to have it query the whole history going back 2 years, and be refreshable by other users on demand.
If I put in dates that do not match up exactly with the start/end dates they have set, I get something like this:
[URL]
I've got a plan of how to approach the data extract, but how can I determine whether or not the web query found a specific table (and should therefore try a different date offset)?
View 1 Replies
View Related
