I have a Userform (frmData) with 4 CommandButtons (Cmd1, Cmd2 etc) and also 2 RadioButtons (Opt1 & Opt2).
I want Opt1 to be the default selection when frmData is opened.
If Opt1 or Opt2 is selected I want that option to stay selected until frmData is closed.
When Cmd1 is selected code1 runs if Opt1 is ticked, and Code2 if Opt2 is selected.
I have an excel file containing 50 sheets which we use as an accreditation test. Each sheet contains one question to which there are several possible answers. These answers (for example, A, B, C and D) are option buttons and when a user selects one, that selection is recorded as their response which is then marked. After answering a question they click a NEXT button to move on and as they move on the previous sheet (question) is hidden so they only ever see the current question sheet.
This has worked well for us for a few years, but we have just noticed some odd behaviour on ONE SPECIFIC sheet. The option button the user selects on that sheet (it is actually question 13 in the sequence) is not stored after the test is completed. However on every other sheet, the selection is stored fine - just this one sheet. The properties of all objects on the rouge sheet are the same as the other sheets. I have duplicated a working sheet and tried replacing the question 13 sheet to try that, but the problem persists.
I tried deleting that Q13 sheet and running the test without it and the same problem occured but this time on the preceeding sheet (question 12) which suggests it is not the actual sheet that is causing the problem.
This is the vb code we have on each sheet
Option ExplicitDim Response As StringDim q13 As IntegerPrivate Sub cmdQ13_Click()    q13 = 0
If optq13a.Value = False And optq13b.Value = False And optq13c.Value = False And optq13d.Value = False Then
Response = MsgBox("You must answer Question 13 by selecting one of the options!", 16, "More Information Needed !")       Â
[Code] .....
So in this example there are 4 option buttons and 1 command button. It is no different to the other 49 sheets
If the user selects French (radio button selection), I want to swap out the existing English text for French and vice versa. One large text box with several paragraphs. Can Excel do this?
View 2 Replies View RelatedI have a chart that's being updated with different values when I cklick on different radiobuttons. When the cells that the radio button refers to is empty or the calculation in the cell have an error it pops up a message that I need to click OK to go on. Is there a way to stop these alerts by writing a script that shuts the alert messages off during each click?
View 2 Replies View RelatedI'm making a worksheet where the user has the options to select "yes" or "no". I used active x radio buttons because I feel they are more flexible. The problem I'm running in to is, what happens if there is an "unknown"? I can't find a way to "deselect" a radio button?
I tried using 2 checkboxes using the following
Checkbox 1:
If CheckBox2.Value = True Then
CheckBox1.Value = False
End If
Checkbox2:
If CheckBox1.Value = True Then
CheckBox2.Value = False
End If
The problem with this is, you have to deselect one checkbox before you can select the other. It works, but it’s a little more cumbersome then I was hoping. Is there a better solution?
When I select the binoculers by project the window we are disucssing with the radio button comes up (after the project number is added and sendkey to select filter - only shows one radio button). Attached is the source code of the original window and a snapshot of what it looks like.
First window - I currently have the code going to the project area (where we cannot type anything) then using sendkey to tab and enter to select the binoculers.
New window - only one radio button shows after you type a project number than hit filter.
First Window.xlsm
Original Window source code.txt
new window.xlsx
New window radio source code.txt
I am looking at designing a simple radio button system which allows me to fill an adjacent cell with values from a certain column - so in the example, column C is the total value, and columns D-F will ideally have a radio button which a user can just click to select the value.
View 4 Replies View RelatedI have code in my macro that outputs a radio button for every project that is entered into the database. All radio buttons are part of the same group. I know how to give the radio button an caption name but I do not know how to give the radiobutton an actual name that I can call to. How can I do this in excel macros?
View 9 Replies View RelatedI am using the developer tools and have created a set of radio buttons that work fine.
On the same worksheet and tab I have created a second set of radio buttons but all the radio buttons are grouped as the same set.
How do I define the second group as a second group?
VBA code for go to next sheet using radio button.
View 1 Replies View RelatedWithin a worksheet, I have several radio buttons, allowing the user to select only one of them. Using VBA, how do I recognize which radio button the user selected?
View 1 Replies View RelatedI have created a survey in excel 2003. It has 70 questions on it and the user responds to the questions by clicking on a radio button. There are 4 radio buttons within a group box for each question and the user will select one of them.
At the end of 'sheet 1' with all these questions on, i have a button which the user presses to proceed to 'sheet 2'. When they press the button i want to ensure is that all questions have been answered ie: 1 of the radio buttons is selected for every question.
If one of the questions isnt answered then a pop up box will appear to tell the user they have unanswered questions and then the vba code will exit and the user stays on the question sheet (sheet 1). If all the questions are answered then the user will move to 'sheet 2'. (the reference cells for all the groups of radio buttons are within column G on sheet 1).
I have an issue with a combo box and radio button.
Anytime I click on either of them, they reduce in size.
It's as if it is reducing by the same ratio every time until you can't click on it anymore.
I am building a form and want to display (or activate) a drop down list only when an radio button is active. I have 4 radio buttons and want to link to to 4 different drop downs. But only have the drop downs active if the button is clicked.
View 9 Replies View RelatedI have a form (worksheet with controls embedded in) and the form changes color depending on what the user clicked, problem is that button colors and cell pattern colors don't quite match.
thought I solved it by making the buttons backstyle = transparent.
However, as soon as radio button was clicked, transparency was lost.
I have named the range of the form "FormGround" so that when Service 1 is select, the Form turn a different colour. I have my subsequent buttons change to that same color as well (using the cell's color index number.
how to disable combobox on radio button click in excel macros'
I have 2 radio buttons: optionbutton1 and optionbutton2 and two comboboxes: Combobox1 and Combobox2.If i select 1st radio button 2nd combobox should be disabled.Vise versa
I'm trying to create a form using radio buttons from the "Forms Tool Bar" and not sure I shouldn't be using the "Control Tool Bar"
I've got multiple buttons and wanted to group them so i used the "Group Box" from the Forms tool bar but now there's a box around the buttons (I've turned off Printing for the box) that gets in the way of other text on sheet. I did some searching and thought I read where you could also use the drawing tool bar and draw a rectangle around the buttons which would then let them operate independent of other groups of buttons but that doesn't seem to work so I'm guessing I imagined it. I also noticed that if you don't draw the "Group Box" around the hole radio button box, they don't work with others in the same "Group Box"
I'm not sure if I should use the buttons in the "Control Tool Bar" but I'm thinking I should so that I have the flexibility should I decide to do something different in the future. I'm thinking about using the buttons to hide a sheet as well as select the sheet for printing, but for now one hurdle at a time.
Lastly I tried looking up some information on how to get the "Control Tool Bar" radio button to behave similar to the "Forms" version of the button (i.e. click the button and it appears to alternate from other buttons in the group), however when I place my mouse over the button it selects it rather than letting me change it's state from true to false.
I have a userform for inputting information to a spreadsheet using the code below. It works fine however if the user does not select a radio button to select a score its saving the rest without it. How can I ensure the user selects a score,,,, ob10, ob8, ob6, ob4, ob2, obna.
[Code] ......
I have a worksheet (attached) that lists various clients in columan C. Column E lists whether each of the clients listed in Column C are 'Existing Business' or 'New Business'. I require a user form that has three radio buttons (one to select 'New Business', another for 'Existing Business' & one for 'All').
When Selecting a radio button, (e.g. 'Existing Business'), I need all clients listed in Column C of the worksheet that also have 'Existing Business' in Column E to be listed in a ListBox on the UserForm (with the second radio button allowing the text box to list 'New Business' and the third to list both Existing and New).
I have a user form that has one combo box on it that right now references one column of data.
Now I am being asked to have three columns of data and the combo box to show one of the three when a certain criteria is met.
I believe it would be easiest to have an additional combox with a change event when the box is populated with "whatever" in the field
So S:3 to S:5 have A, B, C
And EC:1-EC:59, ED:1-ED:59, EE:1-EE:59 contain the data that should show when S:3, S:4, or S:5 is selected.
If S:3 is selected then the list in EC:1 - EC59 would show and so on.
I have an excel file with a date dropdown box. The date is populated from another sheet in the same file. I need to create a macro, which will select the latest date by default when the file is opened. Is this possible and if so could someone please lead me in the right direction? I am using Excel 2003 and the date format in the dropdown box is "dd-Mon-yy" --> eg "21-Dec-09"
View 9 Replies View Relatedto plug a variable (integer) into a text box / spin button as its default value.
I have a sheet set up for data entry where 1 row = 1 record = 1 page (of data arranged to print on a form supplied by an outside company). This data is then arranged on the second sheet (up to a maximum of 30).
If there are there are 15 records entered on the spreadsheet on a given day I am trying to use:
LastNum = Application.WorksheetFunction.CountA(Range("G7:G37")) + 4
Where LastNum is the number of rows / entrys that have been typed into the first sheet and that will be printed by default.
how to get that variable into the text box / spin button control.
Is it possible to set the default page to open when clicking the file button? In particular, I use the recents feature a lot but never have I looked at the information on the information page. Everytime I click the file button I have to then select recents which is annoying.
View 5 Replies View RelatedHow to disable the default close button in a workbook not to affect in my command button close.
I tried already cancel = true but my command button close is also been canceled.
I have a workbook with 2 sheets. Sheet1 has a textbox and 2 option buttons named "north"and "south", and 2 command buttons named "send"and "retrieve".
Also a lot of other boxes, but they're not relevant.
I enter a unique number in the textbox, press one of the option buttons and press "send".
All data is now written in sheet2 in one row.
this all works ok.
Sometimes I need to change some data, so I enter the number in the textbox and press "retrieve". I get all the data back on sheet1, except the option buttons don't change correct. If on sheet2 the value = "north" I would like optionbutton1 to have the black dot and if the value="south" optionbutton2 should have the dot.
Now it's like they are on strike. they just don't react folowing the value of sheet2,collumn G, row "x".
I have done much searching, found some relevant, similar postings, but I have not been able to make it work for my code. I want to have multiple option buttons and have a macro determine which one is selected. One similar posting had macros run from the clicking on the option button, but I want the macro to determine which is clicked and then return some functions. From my research...this is my code.
Sub temp()
If OptionButton1.Value = True Then
Range("C1").Select
Selection = "OB1"
Else 'assuming two buttons and first is false
Range("C1").Select
Selection = "OB2"
End If
End Sub
This gives me an "Object Required" error on the first line of the code.
I would like to know how to configure buttons:
In tab Sheet1 there is Commandbuttons named "Sheet2" & "Sheet3". If i press "Sheet2" then i will be directed to sheet2 tab, same as "Sheet3". In tab Sheet2 & Sheet3 there is commandbutton "Sheet1", if i press the button then i will be directed to default tab which is sheet1.
I have a userform that has 3 option buttons (1, 2 & 3) each of these option buttons have a Label next to them, Label (1, 2,& 3) next to that I have 3 textboxes that are formatted for currency. Each label represents a dollar value $10.00, $20.00 & $30.00
OptionButtom Label TextBox
1 Month Member x $10.00 $.00
2 Month Member x $20.00 $.00
3 Month Member x$30.00 $.00
When one of the OptionButtons is selected I want the corresponding label dollar value to be multiplied by the OptionButton and that value placed in the TextBox
i.e. if OptionButton 1 is select the TextBox would have a value of $10.00
if OptionButton 2 is selected then TextBox would have a value of $40.00
if OptionButton 3 is selected then TextBox would have a value of $90.00
Lastly, if 1 Option Button is selected and then changed to another of the 2 buttons, the TextBox value would reset to $.00
see the attached below.
A few things to sort if I may
How do I get the listboxes to pre-populate based on the Userid and Option Button selection? Furthermore, write back to the correct cell once the selection has been made?
How can I get the combobox to remove blanks in the Userid? (if each cell in row2 has to be populated then so be it)
ToolMatrix3.xlsm
I have a fairly straightforward UserForm with 4 listboxes and 4 option textboxes (the textboxes do not need to be a part of the validation I'm needing). I then have a command button that I want to be enabled ONLY if ANY of the 4 Listboxes have a selection. I've tried the "Change" event code below and it works upon the first selection of any listbox item.
However, if the user de-selects all selections in the listboxes (i.e. they are all unchecked), the command button remains enabled. I need the validation logic to enable/disable the button to persist as long as the user has the form open and if there is not a selection in ANY of the listboxes. The reason being is that if they click the command button it will update the cells in the worksheet, which if empty may overwrite previous work completed with blank cells.
