i want to create a button in excel worksheet that when clicked copy values from a column (say A1 to A25) and store it so that it can be copied to word file or notepad or even in other excel worksheet. so i think i need a macro for this or it can be done by writing VBA Code.
View 9 Replies Sub Mainscoresheet()
Dim k As Integer, i As Integer, cs As Integer
Set b = ActiveSheet.Buttons(Application.Caller)
With b.TopLeftCell
cs = .Column
End With
I have a button assigned to this macro about 20 times all over my worksheet
I will place the button in dirrerent locations. What I need to do is get the column that the top-left corner of the button and assign that to "cs".
Example if the top left corner of the button is in column "F" then cs would be 6.
I have a spreadsheet with a variable number of xlButtonControl type form controls. The actual number of buttons depends on the amount of data that the spreadsheet is being asked to summarise. All the button controls use the ".OnAction" property to point execution on click to a common procedure.
Unfortunately that much is what it is and is beyond my control, so I just have to work with that.
What I would like to know is if there is a property or method I can access from within the common OnAction procedure that enable me to identify which button was pressed. If this was a CommandBar environment I would use the ActionControl property. Since it's not, and since I can't change it (not even to use ActiveX controls!), does anyone know an equivalent that I can use in this case?
I have several buttons which, when clicked, pull up a range of data from another tab. Each button repopulates the appropriate cells with its specific data. I need to have an identification of which data set I'm currently viewing so was considering having the button, when clicked, change color or background/lettering colors swap, etc, until another button is clicked, then it changes color and the original button returns to the standard format. Is this possible? What type of button do I need to use?
View 1 Replies View RelatedIs there a way in VBA to reference the activeX button which has been clicked? Like a ThisWorkbook equivalent for a button?
I have quite a few button whereby they set a parameter for a procedure 'TrendData' based on the row they sit in. Currently I just have the row number hard coded i.e. Call TrendData(5) but I want to amend this so that when I add a row it doesn't offset all my buttons.
For Example
Call TrendData(CommandButton3.TopLeftCell.Row)
However instead of typing CommandButton3, CommandButton4, etc. I would like the code to know which button had been clicked and just use that?
There was a similar question I found answered in the archives. However the solution given there (using ActiveSheet.Buttons(Application.Caller).TopLeftCell.xxx) does not work in my case.
A little googling and I think the reason is that I added my buttons from the toolbar and not from the forms editor. My buttons are in the OLEObjects collection, not in Buttons.
So how do I determine which of my OLEObjects was clicked? Is there something similar to "Application.Caller"?
I need a code for "click-able button" in my excel sheet that will call makro "copy" which I have connected with ThisWorkBook /Sub copy() .../ or in other case with Modules (module 7 for example).
So, what to add between this:
Private Sub CommandButton1_Click()
?
End Sub
I have two custom toolbar buttons. I want to disable one of them until the second will be pressed (sorry for my english).
View 3 Replies View RelatedI have a form with two buttons, one is to start downloading, one is to stop it, a sub is called when start buuton is clicked, there is a DO LOOP, I hope the DO LOOP stop when I clicked STOP button,
View 9 Replies View RelatedI have a command button that when pressed I would like the name written on it and colour to change
View 2 Replies View RelatedI can't find a way to reset/clear the textbox in order to enter new data
View 2 Replies View RelatedCurrently I have 5 identical command buttons which do something similar but in a different cell.
What i want to do is sum up the 5 different task using a single command button.
When cmdaddsp1 is clicked the first time cell "B4" is populated with a value from a table.
When cmdaddsp1 is clicked a second time cell "B5" is to be populated with a value from a table.
When cmdaddsp1 is clicked a third time cell "B6" is to be populated from the table,
and so forth.
Is there a loop or anything that can be used for this? I only want other cells to be populated when the command button is pressed.
I am looking to create a form that when a user enters data in it, and clicks a save button it will submit that data into cell A2, and then with the next time the enter data it will submit that data to cell A3. I would like it to continue moving down a cell each time somone hits a "submit" button.
View 6 Replies View Relatedcode to pull a hidden frame when I click a command button. I have Uploaded a Sample worksheet on my requirement.
View 4 Replies View RelatedI have a form (worksheet with controls embedded in) and the form changes color depending on what the user clicked, problem is that button colors and cell pattern colors don't quite match.
thought I solved it by making the buttons backstyle = transparent.
However, as soon as radio button was clicked, transparency was lost.
I have named the range of the form "FormGround" so that when Service 1 is select, the Form turn a different colour. I have my subsequent buttons change to that same color as well (using the cell's color index number.
I am having difficulty finding information on coding my spin button on a user form. I searched and haven't found any information. I need to do is code a spin button to increase or decrease by 1 each time it is clicked up or down. I would like it to populate to a text box on my form if that is possible.
View 3 Replies View RelatedI currently have a small userform placed at the bottom right of the screen (with a command button on it) and this opens up on top of excel instances and other applications/windows and it is set so that you can't interact with anything except the userform.
I wanted to minimize the userform and give focus to immediate next window (can be excel or non excel applications) for 10 seconds and then activate/show the userform back again, when the "Button 1" on the userform is clicked.
I tried hiding the userform, but this doesn't give focus to the immediate next window. Below is the code
Private Sub Button_Click()
Me.Hide
PauseApp (10)
Me.Show
End Sub
I could only find answers for adding minimize and maximize buttons to userform.
When the button is clicked, it should perform
Step a - Minimize the userform
Step b - Give focus to the next immediate window behind the userform
Step c - Wait for 10 seconds
Step d - Bring back the userform its to state.
Can a event be triggered when the Visaul Basic Editor command button is clicked in Excel?
I have a userform that has a combobox in it that also has an OK button and a Cancel Button. Need getting the combobox to pull in the correct list? The data for this list will be in cells A2 through A16. But not all 15 lines will always have data in them so I'd like to only show the ones with data. Then next issue i have is I would like the OK button on this userform to actually erase the data the user has clikced on in the combobox. It's a list of kids that the userform is asking which one needs to be deleted. So it might be the kid in cell A9. so when the user clicks on that kid in the combobox form a9 and hits ok I'd like to have all the kids below A9 move up one row.
Windows XP
excel 2003
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies View RelatedI need to assign two actions to a one button.
1. action: Copy Column A, paste to Column C
2. Write time&date into G5
I am only capable of doing one button for each action using the macro recorder and simple code:
[Code] ....
I have a frame (Frame1) on a userform added using Microsoft Forms 2.0 Frame. I have added option buttons to the frame named OptionButton1 thru OptionButton4. I am trying to add code where certain cells are copied and pasted depending on which optbutton is selected. I tried the following code but because the option button is a frame object it doesn't seem to trigger the event.
Private Sub OptionButton1_Click()
'copy level 1
If Me.OptionButton1 = True Then
Worksheets("Sheet1").Range("G10:G32").Copy
Worksheets("Sheet1").Select
Worksheets("Sheet1").Range("C10:C32").Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
End If
End Sub
I attached an excel that I created. But I have one problem with it.
View 4 Replies View RelatedI have a command button that I want to automatically copy and paste certain data to another worksheet when clicked. I keep getting a "runtime error 1004; application-defined or object-defined error". The code I have so far is:
View 5 Replies View RelatedIf values in column B are alike or if only one value exist in column B, I would like to copy values from column A over into columns D and all other columns to the right of D,
Before and after examples are below....
What in the world did I do now? When I click on any cell, the cursor turns into a thick "+" . Then, when I move my mouse up and down the spreadsheet, all the cells the "+" touches become highlighted.
View 9 Replies View RelatedI would like to use a command button to copy a row of data from one workbook to a column in another workbook. The row of data will have different values on a daily basis but will always be B2 through BE2. I would like the copied row of data pasted in the next available column to the left in the other work book.
View 3 Replies View RelatedI've got workbooks containing various numbers of sheets that represent rooms with equipment in them.
The room number is always in cell B4. The data always starts in cell A8. I need to somehow copy the room number down column G starting at G8 and going down only as far as there is data in column A, which will vary for each sheet. I also need it do do this on all the sheets in the workbook.
I have NO marco skills, can anyone help start me off?
I've tried (and failed miserably!) to copy and then paste values from a COLUMN to a ROW using all sorts of code I'd picked up in the forum but all the code only works when copying and pasting values from ROWS to ROWS.
I have data in cell A1, A3, A5 to A13 on Sheet1 (notice blank cells inbetween) that I'd like to copy to to Cells A2 to M2 (A1 to M1 have headings) on Sheet2, then A3-M3 etc.
The cells on Sheet1 will always be the same, BUT each time I click the "Transfer Data" button, those values must be transferred to Sheet2 IN THE NEXT EMPTY ROW, please.
It is not necessary to skip the blank cells in the COLUMN Sheet1 - simply copy / paste them as empty on Sheet 2 and I'll hide the empty columns, i.e. B, D, etc. If it is easy to code this "skipping of blank cells" (thereby limiting the copying / pasting data in order to speed up the process), then that code would be great - I simply do not know what effect it would have.
The values thus copied will become my data sheet.