When I run my code (which opens Excel from Access) it does everything it is supposed to but I then get the above error but I do not get the error if I open the VBA window and then run the code. (The code is password protected, not sure if this is relevenat though).
The macro below is stored within worksheet "Data Lookup". When the value in B1 changes, the code is executed but fails when it comes to the paste function. I get a "Object doesn't support this property or method".
Also, it appears the copying is not occuring correctly. It is supposed to copy from the Data3 worksheet but, in fact, its copying from the Data Lookup worksheet. Does storing this macro within a worksheet prevent the macro from moving between sheets?
Sub Worksheet_Calculate() If Range("B1").Value = Range("N1").Value Then End Sheets("Data3").Select Cells(13, 6).Copy Sheets("Data Lookup").Select Cells(23, 11).Paste End Sub
I was using the following macro on Excel 2000, 2002 & 2003 for many years without a fuss. Recently, I upgraded to Excel 2007. When I run the macro now, I get the following error message:- Run-time error 445 Object doesn't support this action.
Sub test() With Application.FileSearch .NewSearch .LookIn = "C:Documents and SettingsDesktopCommercial Database" .SearchSubFolders = True .Filename = "*.*" .TextOrProperty = "BANK" .MatchAllWordForms = True .FileType = msoFileTypeAllFiles If .Execute() > 0 Then MsgBox "There were " & .FoundFiles.Count & _ " file(s) found." End If End With End Sub
Additional info:- The 1st line of my code which is With Application.FileSearch is highlighted in yellow when I run this macro.
I'm getting a really weird error in that I can't reproduce it. It sometimes occurs when I open the document and sometimes not. HEre is the Private Sub Workbook_Open() Dim dic, Dn As Range, rng As Range
Set rng = Sheets("Moisture").Range("B2:B1000")
Set dic = CreateObject("Scripting.Dictionary") With dic For Each Dn In rng If Not .exists(Dn.Value) Then .Add Dn.Value, ""
End If Next Dn Set wksPayment = Sheet10 wksPayment.ListBox2.List = .keys End With End Sub
The line that hangs up is the wksPayment.Listbox2.List = .keys line. Any ideas or ways to test or further figure out what is causing the problem?
I'm trying to write some code to make an existing chart display the correct series of data. However, on the ".SeriesCollection..." lines, it gives me the error "Object does not support this property or method." I'm using a Bar-Line graph, if it makes any difference.
I'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
I'm trying to set the print area on two sheets in the same workbook and it is returning Method 'Range' of object' _Global failed error every time and I can't figure out what code to change to make this error stop happening. here is my
I start in my "Action Plan for For Single Market" worksheet and if I click on the Command Button I then want to read in a couple of variables, and jump to a second worksheet (called "Market Action Plans") where I then want to copy a range, and then paste it in another area in that same sheet.
I thought I had worked out what to do, but when I execute I get a "run-time error 1004" when the macro gets to the "Range("Updated_Results").Copy" line. Excel describes the error as "Method 'Range' of object '_Worksheet' failed'" - which might as well be a foreign language as far as I am concerned!
End Sub I am an occasional macro-creator and every now and again, I come across this type of problem where I can't get variables to be reconized, etc. I think it's because I don't understand enough about Private versus Public, and how to declare variables.
I have a cet of CommandButtons on sheet 1. The code for these buttons is in the code section of the sheet. A named range is referenced in this code. This named range is on sheet 2. Every time I try to reference this or any named range (from any other sheet), I get this "Run-time error '1004': Method 'Range' of object '_Worksheet' failed"
The last time I had this error I was able to fix it by moving the code to Module1. I tried that here, but it did not work (I can't figure out how to call it from the sheet). CommandButton. Here is the code from the sheet for one of the buttons:
Private Sub TBEnterUp_Click() iLast = Range("WBDate_DayLast").Value '<<<<<<< iItem = TBEnter.Value If iItem = iLast Then TBEnterUp.Visible = False Exit Sub End If TBEnter.Value = iItem + 1 If iItem > 0 Then TBEnterDown.Visible = True End Sub
It is a simple number advancer. It is working in the UserForm I took it from. I have included a sample file of the problem. Feel free to look at it and borrow anything in it that you might like.
i get this error on the line in bold Method Add' of object 'CommandBarControls' failed (run-time error '-2147467259'). im not sure why its giving that problem, but im not very fluent in custom toolbars.
'//The following two procedures add a custom menu to the workbook programmatically//' '//and then delete it//' Public currentMonth As String Sub CreateMenu() Dim mybar As CommandBar Dim myControl As CommandBarControl Set mybar = Application.CommandBars.Add( Name:="CustomButtons", _ Position:=msoBarBottom, Temporary:=True) mybar.Visible = True Set myControl = mybar.Controls _ .Add(Type:=msoControlButton, ID:=1) With myControl...........................
I am trying to build a macro which will format the columns of a spreadsheet - basically it inserts some columns, writes formulas and highlights them. Here is a code I have got so far...
When I try to run this I get a run time error 1004 - Method 'Range' of 'Object'_Global' failed. The part of the code Range("N2:N").FormulaR1C1 = "=(RC[-7]/RC[-2])"
is highlighted in the debugger.
Can anyone tell me why this is happening, also it would be great if you could suggest better ways of writing this code - as I am new to vba programming and most of my macros are built using the recorder and then 'working' on them.
I have an interesting error that only happens when there is one row of data in the worksheet (sheet2 or "Half Payout"). Rows 1 & 2 are headers, row 3 is when the data starts - if any. With either no rows of data or more than one the coding works just fine. Here is the exact error message I'm getting: Run-time error '1004': Method 'Range' of object '_Worksheet' failed.
The following code is supposed to sort the rows of data when opened and then activate the first open cell below B2.
i'm tring to reuse this code which creates a label on excel. The data used to create the labels is on the "Data" sheet and the labels are generated on the "Label" sheet.
The problem is the first time i run it it generates the labels, then whenever i try again it gives me the following error; Method 'Range' of object '_Global' failed. Each row on the "Data" sheet repreents a label.
I am trying to create a macro in my personal macro book such that whenever any workbook is opened the calculation settings (tools, options, calculation tab) are set to semiautomatic and do not calculate before save. The macro works when I am opening Excel itself (Book1) but when I open an already saved file it gives me
Run-time error '1004'
Method 'Range' of object'_Global' failed
From there I choose Debug, the VBE window comes up, and I hit F5 to continue the code without doing any actual debugging. Here is the code that I am using. This is in the Personal Macro book on the "This Workbook" section....
I am not familiar with Excel/VBA and I tried a couple of suggestions with no luck. The excel file contains three forms and three modules and it is intended to calculate and build Electrical panels. I didn't write the code. I am just trying to fix the error. I was trying to attach the .xls file but it is 178 KB. How can I post the whole code.