I run this code in my workbook and it seems to work but i would like to do same kind of jumps by clicking on a different cells and cant seen to figure out how i can add more of these function.
View 2 Replies
Whilst stepping through code in any new sub/ function that I create in VBA, VBA Editor (seemingly arbitrarily) jumps to a line in a completely different function.
View 4 Replies View RelatedI'm trying to double-click a cell to edit the contents, and I am off a few pixels, it treats the double-click as a double-click on the cell border, not the cell contents, and the focus jumps to another cell in the direction of the border instead of going into edit mode. The effect is as if I had pressed Ctrl and the arrow in the direction of the border I clicked on.
The only way I've found to disable this is to turn off the option "Enable fill handle and cell drag-and-drop", but unchecking that also disables actually useful things, like dragging the corner of a formula call to copy it down, etc.
Is there a good way to disable this cell jumping when I accidentally double-click a cell border?
I have programmed a Form in VBA that initializes by clicking a button on a worksheet. The Form features combo boxes, text fields, and a couple option buttons. Once completed, the Form enters the values entered by the user (as strings) in contiguous colums in a single row. The worksheet is locked so as to not allow users to input values into the worksheet directly and bypass the Form.
The question:
Once a row is filled by submitting the Form, i want to allow a click event on that cell (like double-clicking, for example) to pop-up the Form, but containing the corresponding values from the cells in the matching combo boxes, text fields, option buttons. I want to do this so that I can allow modification on a row without letting the worksheet be modifyable without passing through the Form. Here's the code for submitting the Form values into the worksheet:
Private Sub cmdSubmit_Click()
ActiveWorkbook.Sheets("ALTEC Growth Report").Activate
Range("A7").Select
Do
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
ActiveCell.Value = Trim$(txtName.Value)
ActiveCell.Offset(0, 1) = cboCC.Value
ActiveCell.Offset(0, 2) = cboProdServ.Value
ActiveCell.Offset(0, 3) = cboStatus.Value ..................
repeating the code on the same worksheet.
i am trying to input this code to my worksheet
I have some code that copies and pastes data from one cell into a range. The one cell is B4, and the range is A6:A10. This same action must be done every 30 lines (so the next time the cell is B34 and the range is A36:A40).
What do I need to do to make this action repeat/loop every 30 lines?
how to run some VBA code (written by someone else, unfortunately) only when clicking once in cell A1, and not run in any other cell. This is being run in Excel 2010. The code I would like to run in this manner is below, and currently will run when the user clicks on any cell in the worksheet it is applied.
[
Option Explicit_________________________________________
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
'If IsDate(Target.Cells(1, 1).Value) Then
Set DatePickerForm.Target = Target.Cells(1, 1)
DatePickerForm.Show vbModal
Cancel = True
'End If
End Sub
]
sorting data I use in a workbook for athletics. I've really chopped down my workbook for upload, In the worksheet "Leaderboard" I can call up stats for different lifts, and it finds (in this case) the top 5 lifts and the names for the kids that have those corresponding lifts.
My problem is that when two or more kids have the same lift, it will only call up the name of the first instance of that lift. You can see this in the "Leaderboard" worksheet, and the name "Adams, Andrew" appears for both lifts of 75. I would appreciate any help on how to correct this, as I've searched the Internet for weeks now looking for a solution. I've tried experimenting with different things as well, all to no avail.
Is there a way to disallow certain cells to be clicked on?
View 9 Replies View RelatedI have a list of links in 1 excel worksheet. They are spaced every other row if it makes a difference. I need to create a macro that clicks on every link automatically. Each link is a direct file that I need downloaded every few months. I have no Macro experience beyond hitting record to automate basic tasks.
View 13 Replies View RelatedIn the worksheet "Batting and Pitching Register", I'd like to be able to sort the data in the two charts (APBA Batting Register and APBA Pitching Register) by simply clicking on the cells in the respective header rows.
I've set up ranges (Batting and Pitching), but have had no luck moving beyond that.
i created this form and i want it to do the following tasks :
-after clicking export the in content of the txtbox to excel cells
-save the excel file
-and prompt another form
(and when entring new content , export it in a new line (i have 30 lines))
i also want to creat a button that opens the first form
I have a column that tells whether an adjacent cell is positive or negative. I'm trying to come up with a macro/formula that will tell me how long (# of rows going down) a negative or positive sign repeats before changing.
So it would go down the column and count the rows where the same sign repeats. Once the SIGN switches from + to - or - to + the number goes back to 0. Essentially counting the cells that move in one direction (+ or -).
For example. if A1 = +, A2 = +, A3 = +, A4 = +, A5 = -, A6 = + then it would count A1:A4 and output 4 in B4, meaning that the numbers have stayed negative for 4 rows. For A4:A5 nothing should appear as this sign change we don't want to record. Same for A5:A6. I don't know how to make a formula/macro to identify a repeating SIGN, and then dynamically count all those rows until the sign changes. Does this make sense? I've been beating my head against the desk trying to figure it out with no luck.
I have a strange problem with a spreadsheet I've set up. It has several tabs with multiple information on each. The sums on each individual tab are linked to the front tab (which I've used as a summary page), but I haven't put any other links in.
For some reason, when I type anything in certain cells on one of the tabs (including the summary but not just that), it appears also on all the others, not necessarily in the same place. If I delete it on the the other tabs where it shouldn't be, it deletes the original on the correct tab, which I want to keep. This has been going on for ages, it annoyed me so much I completely recreated the spreadsheet, from scratch, but it's still happening.
ok is there a way to have excel fill a certain number of cells with specific data specified X times? For example, the end result would look something like the pic below. The column on the right would change according to the numbers specified in the yellow column.
View 9 Replies View Relatedworking on grouping coordinates because he we wants to simplify data. But he works manually and it eats his time. He has some sheets with data. I suppose there are 7 sheets. Each sheet has coordinates shown on example below. Also there are intervals between pairs of columns, so there will be column A with B, interval of two columns C & D, column E & F and interval of two columns G & H and so on (altogether about 10 columns of coordinates per sheet). Every coordinate begins with argument '1' and increasing gradually by 1 (it is column A). Second column shows values of arguments. But some are repeating, some not. I would like to double these coordinates, where in one argument is only one value (for example these are row 1. and 11.). If there are two the same values I would keep them. But if there will be more values than two, for example row 5. - 8., I would delete row 6. and 7. from the middle. But border coordinates should be kept (row 5. and 8.) and split by moving up lower coordinate to it with rest coordinates. But I want do it separately for every two columns which contains these coordinates, so if I delete coordinates from columns A and B and split boundary coordinates I don't want do it for columns E&F, I&J...
Examle:
Before:
A B
1. 1 1
2. 2 2
3. 3 2
4. 4 2
5. 5 3
6. 6 3
7. 7 3
8. 8 3
9. 9 4
10. 10 4
11. 11 5
12. 12 6
13. 13 6
14. 14 6
15. 15 7
16. 16 7
.. .. ..
After:
A B
1. 1 1
2. 1 1
3. 2 2
4. 4 2
5. 5 3
6. 8 3
7. 9 4
8. 10 4
9. 11 5
10. 11 5
11. 12 6
12. 14 6
13. 15 7
14. 16 7
.. .. ..
i need a formula for a sign in sheet for the academy i work at. we have night and day classes of the same sessions, in the planner they are listed as d1, d2 d3 and n1 n2 n3 and so on for each.
so basically im trying to create a formula to quickly ender the d1, d2, d3 ect into the cells on eachpage for the students to sign in for each day it works out to be about 190 calls and 9 diferent classes to you can see why id like to speed this up. problem is i need the number to change not the D and excel want to use the cell allocation.
as you can see from the document i have not attatched, i have created a formula to add in the dates automatically, i would like to do the same with the session numbers or the D numbers, this is one of the shorter courses and has about 190 days
Based on a trigger point (being a month), and the number of times the expenditure is spread over (factor), can I formulaize the repetition of the figures?
Sheet1 *CDEFGHIJKLMN5***Trigger Points**Desired result via formulae
**6CostFactor*JunJulAugSept*JunJulAugSept7
£ * * * *10,000 2**1**** £ * * * *5,000 £ * * * *5,000 *8 £ * * * * *6,000 3*1**** £ * * * *2,000
£ * * * *2,000 £ * * * *2,000 *9 £ * * * * *8,000 1***1**** £ * * * *8,000 *
I have figured out how to write a macro to make charts for me automatically, but it only runs the macro on the exact same range every time.
I have about 100 different students to make charts for and would really like to find a way to do it more automatically
Is there a way to write a Macro so that I can run the same steps on a different range (same number of rows and columns)?
Edit: having learned from my first post, I am adding more information.
the first chart is from the data in the range from B5-H7
the next chart would be from the data in the range from B11-H13
The charts are not evenly spaced from each other. I will need to select the range (same size) each time.
I can record the Macro, I just can't apply it where ever I want to.
(Using Excel 2007)
What would be the quickest and most efficient way of doing the following:
Example
Sheet 1: clicking once, twice, three times in the following cells to change the fill to Red, Yellow, Green respectively (in Row 22, COLUMNS E H K N Q T W Z AD AG) and mirrorring this format/fill on:
Sheet 2: , mirror the selected fill on sheet1 in E22, H22 , K22 in in E3:N3 respectively example E22 (sheet1) is mirrored now in E3 (sheet 2); H22 (sheet 1) is mirrored in F3 (sheet2) etc etc.
I have 35 tabs formatted in the same way - each tab, as with Sheet 1 is linked to a different row on sheet 2 in the same range as is sheet 1 and would need to replicate the mirorring on Sheet 1 to each of the other 34 tabs.
I have a form that users will fill in, and I need to print a set number of labels (all identical) based on the info that is entered.
I have the form set up with data validation and indirect references(Lists on a separate sheet)
Example...
User enters in:
Customer name
Product name
Lot #
PO#
Date made
Number of items
From there I have a separate set of cells that reference the above info formated to how I want the label to appear when printed.
Now, I need to repeat that label the set number of times (# entered in as "number if items") in a label sort of format (not sure if a mail merge will work for this??)
Then, print off and stick identical labels onto each part that is manufactured per PO/Date etc.
In column A in sheet 1 I have a list of ID (starting in cell A2), the Id's are repeated and a new Id first appears in cell A30, repaeting the pattern the next new Id is in cell A58. This goes on in the pattern to around cell 44,000. All I want to do is write a formula in another sheet that enables me to have the cell value of A2 on the new sheet and in the next row of the new sheet to have the value of A30 and so on, until I have all the id's individually displayed on the new sheet.
After that I have data from the rest of the row (A2,B2,C2 etc) of sheet 1 in the following cells of the new sheet. After that I'm transposing data from column H of sheet 1 so it appears in the row of the new sheet against the ID's.
Sheet 1
Column headers> (A)Patient name, (B)number, (C)gender, (D)DOB, (E)Sample ID, (F)Hospital, (G)blood test parameter,
(H)Result Row 2 columns A to F repeate to Row 29 then next patient details list. These I want as Row 2 columns A to F in new sheet then the results transpose from column H sheet 1 to new sheet row 2 columns H to AI. (the results I have working with transpose)
When I Step through (Using the f8 Key) the below code -- Comments Explain my problem/Question
Code:
Sub SetUpTable()
Worksheets("Sheet1").Activate
Application.Calculation = xlCalculationManual ' Without entering this line the Macro in the next line or two), jumps to and begins running a UDF in a VBE ADDIN
'Module marked as Volitile
For TheYear = 1 To 5
Cells(1, TheYear + 1).Value = 1990 + TheYear
[Code]....
The spread sheet I have written reaches a point, where I want the "ENTER key depress" to jump to a cell to the right instead of the cells in the same column lower in the sheet, is there a way to do this?
View 9 Replies View RelatedIn my worksheet, I know the last line of my report AND I know how many "reporting segments" (all equidistant and identical) there are in the report based on the last row using the below (which I tested in several reports in messages):
VB:
Dim vListEnd As Variant
Dim vTaskCount As Double
vListEnd = ActiveSheet.Range("A1").Offset(Sheet1.Rows.Count - 1, 0).End(xlUp).Row
vTaskCount = ((vListEnd - 5) / 22)
My "reporting segments" are ALWAYS 22 rows each and the first one always starts in row 5. Example: A document where the last row (containing an End of Report special character) is 247 would have 11 reporting segments.
Within each reporting segment, there are two different formulas needed.
For the first reporting segment located in rows A5 thru J27:
I need FORMULA1 in all cells of the range (D5:D15 dragged out to H5:H10(not 15) and D18) and FORMULA2 in cells (F20:F22,J20:J22).
Then I need to repeat that vTaskCount number of times (number of segments) and at intervals of 22 (segment repeater offset). Some reports may have 2 segments, some might have 50, but the structure is always identical.
My formulas are all pretty simple if it makes a difference (originally using FormulaR1C1 = "=RC[-1]+RC[-3]" --- but because I now know solid cell locations I suppose I don't need to make them relative, too.)
I have a list that I need to move to another column without spaces. I have it moving without spaces but it is only one item over and over again. I am using Excel 2010 and that may be my issue. I have attached the exact worksheet and formula.
To Buy List.xlsx
I have a system running Windows 7 Professional (32 bit) and MS Office 2010.
In Excel 2010, I have a spreadsheet that contains several hundred rows of data. When I cut and paste a section of data, Excel jumps to the top of the spreadsheet. This does not happen when I copy/paste, just cut/paste.
I have a macro that calls 3 other procedures during its run. I have the positon set in the UpdateIndicator sub
With ProgressIndicator
.Top = Application.Top + 300
.Left = Application.Left + 400
end with
and the Userform StartUpPosition property set to 0 - Manual (though I did experiment with the other settings as well.
The issue is that when the series of subs are running, the Indicator jumps and shifts (by 10 or so pixels down and right) and sometimes blinks off completely as each new sub is being called and subsequently returns to the initial macro.
It is accurate and does what it's supposed to do, I just find it annoying and that it probably looks a bit unprofessional (and unstable) to the eyes of some coworkers who use the macro as well.
I have 2 sheets in a workbook where i would like cell G8 on sheet 1 to equal the value on A11 sheet 2 & G9 to equal A12 and so on down the sheet. The problem is that G8 are 3 merged cell so every time I try to use autofill the reference number jumps by 3. The formula in cell G8 is
View 3 Replies View RelatedI'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:
[Code] ........
When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.
