Select Next Blank Cell
Aug 2, 2006
I am trying to write a macro to paste some data from one worksheet into another. I need to paste the data into the next blank cell down from the existing data.
I have looked at this thread already
For w/o next error
but cant seem to get it to work.
This is the code I have got so far but it isnt working. any help would be much appreiciated.
'main part of code to copy data left out
Windows("performance tracker.xls").Activate
Sheets("Data").Select
ActiveWindow.SmallScroll Down:=9
Set rngDestination = wsData.Range("A65536").End(xlUp).Offset(1, 0)
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = Format( Date, "dd-mmm")
Sheets(" Total").Select
ActiveWorkbook.Save
View 9 Replies
ADVERTISEMENT
Mar 17, 2014
I'm trying to select the next blank cell starting from a specific cell (N45) and then add a value from a textbox.
Ive got the following code but it isnt working.
Code:
ThisWorkbook.Sheets("RRHH").Range("N45").End(xlDown).Offset(1).Select
Selection.Value = NameTextBox.Value
View 8 Replies
View Related
Mar 14, 2014
I have a spreadsheet for tasks. When I select from a pull down to mark as "Completed", I would like this to cause the cell containing the start date to go Blank.
View 2 Replies
View Related
Feb 9, 2010
I want to select the first blank cell in the first blank column. I would just look at the column and instruct it to select a given range, but each month the blank column will change (by moving one to the right).
So for example
This Month:
Columns A-Q all have data in it. So, I would need to select cell "R1"
Next Month:
Columns A-R will all have data in it. So, I would then need to select cell "S1" Need code to auto-detect the blank column and then select that column's first cell?
View 2 Replies
View Related
Nov 9, 2005
I've got 12 columns (headed Jan - Dec), each of which contains a combination
of numerical & blank cells. For each row, I want to select the first
non-blank cell and return the column header that it lies in e.g. Row 1, first
non-blank cell is in the Apr column, so I want the text "Apr" to be returned
to another cell.
View 9 Replies
View Related
Oct 31, 2013
I am trying to randomly select 10 data from a table by using index formula. But there are some blank cell in the table so It kept returning 0 in the cell.
problem.xlsx
View 2 Replies
View Related
Oct 2, 2013
I am trying to achieve the below objective but getting error message
Objective: select last non blank row and offset to next cell type a message in it
error message: Runtime error 1004 : method 'Range' of Object '_Global' Failed
CODE:
Sub lastRowAll()
myvar = ActiveSheet.UsedRange.SpecialCells(11).Column
myrow = ActiveSheet.UsedRange.SpecialCells(11).Row
Range(myvar, myrow).Offset(0, 1).Value = "Experiments with VBA"
Range(myvar, myrow).Offset(0, 1).Activate
End Sub
View 6 Replies
View Related
Aug 22, 2007
Was wondering .. as I can not seem to find the right type of coding.
I am trying to have the file open in the next blank cell on column C, ut at least have 5 lines showing above it as there is Freeze Panes.
Is this possible for excel to do upon opening?
View 8 Replies
View Related
Jun 6, 2014
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies
View Related
Mar 10, 2014
I can I select all non-blank cells (including constants and formulas) in a sheet? I am familiar with SpecialCells(xlCellTypeConstants) and SpecialCells.(xlCellTypeFormulas) but these seem to be mutually exclusive.
Can I do something like: NOT SpecialCells(xlCellTypeBlanks)?
View 2 Replies
View Related
Nov 7, 2008
I need to select all data in columns A:F but the number of row containing data is variable. I need to select only the rows with data.
View 7 Replies
View Related
Mar 30, 2012
I came across this code that selects (and extends) cells between the active cell and the next cell with data.
Is it possible to modify this so that it selects the entire Rows ?
Code:
Sub Test()
If Selection.Select "" Then
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
Else
Range(Selection, Selection.End(xlToRight)).Select
End If
End Sub
View 4 Replies
View Related
Jul 31, 2014
how to get a selective cell range after i apply a filter,
I have it currently that it will copy the data shown but i don't want it to copy if there is no data present?.
ub Ding*****urn()
' Ding*****urn Macro
Sheets("Master").Select
Range("D1:E1").Select
Selection.AutoFilter
ActiveSheet.Range("$D$1:$E$800").AutoFilter Field:=1, Criteria1:= _
"DINGLES BOURNEMOUTH"
ActiveSheet.Range("$D$1:$E$800").AutoFilter Field:=2, Criteria1:="MENSWEAR"
Range("A2").Select
[code]....
when i comes to the selection i only want it to copy cells that represent a value within that filter not cells that are blank?
View 2 Replies
View Related
Aug 19, 2006
i need a macro that will select all the blank cells in a column.
View 5 Replies
View Related
Sep 25, 2007
Can a macro be used to select only blank merged cells on a worksheet? If so, how do I create this macro?
View 6 Replies
View Related
Mar 12, 2008
I have a spreadsheet which always contains data beginning in column A and through row H. However, there may be blank cell(s) in columns B through G. Therefore, if I use
Range(Selection, Selection.End(xlDown)).Select
it will not take me to column H if say column d has a blank cell. The same applies to my rows which always vary.
View 3 Replies
View Related
Feb 11, 2007
when I select 30,000 Row and 3 Columns then Edit>GoTo>Special>Blanks , Excel gives me MSG : selection is too large
View 2 Replies
View Related
Feb 17, 2008
I have a problem with the following code.
I want to select multiple rows in a very huge spreadsheet. But, when I
use this code, I receive an error: Runtime error 1004, Method ' Range'
of Object '_global' failed. What is wrong? Or maybe there is other
better way to select automatically empty rows in a spreadsheet?
Public Sub delhol()
'
' delhol Macro
'
' Keyboard Shortcut: Ctrl+d
'
Dim k As Variant
Dim rr As String
k = Array(34, 35, 38, 39, 40, 77, 133, 182, 207, 209, 225, 226, 295,
299, 300, 338, 394, 437, 468, 470, 480, 481, 560, _
591, 599, 655, 712, 729, 746, 755, 756, 852, 860, 962, 990, 1005,
1006, 1077, 1081, 1082, 1083, 1114, 1176, _
1217, 1252, 1260, 1261, 1338, 1342, 1343, 1344, 1375, 1381, 1437,
View 4 Replies
View Related
Jun 5, 2009
I want to select the variable range somewhere in the middle of the sheet from where the 2nd instance of cell named "real cost" is, down to the next blank row (select the area without the blank row), so that I could copy it to another sheet.....
View 6 Replies
View Related
Jul 13, 2012
I would like to search Column C for an instance of the text "Std. Residual", then cycle through the non blank cells to the right and run some formatting code:
VB:
'this line will be modified so that i cycle through the non blank cells that i have found
For row_cycle = 1 To 7
'not signifcant
If Abs(ActiveCell) < 1.96 Then
Selection.Interior.Color = 255
[Code] .....
I then want to search for the next instance of "Std. Residual" in Column C, do the same again, and so on for the entire Worksheet.
View 3 Replies
View Related
Aug 3, 2012
I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
View 2 Replies
View Related
May 4, 2014
i want to delete entire blank row from column C2:C300 i mean if i have data c2:c100 then c101:c300 delete entire blank rows
View 4 Replies
View Related
Jan 21, 2012
I need a code that will copy the format AND formulas of the entire row that I have selected (or activatedwith my cursor) to each and every blank row - until it gets to the last row of data on this spreadsheet.Since any employee could have more than 1 row of data - I am using a code that inserts1 blank row after each NEW employee name.
NOTE: This report is initially sorted by employee name so that each occurrence is grouped together.REPORT SPECIFICS:1) This report reflects typical paryoll information.2) Certain columns have data that is either in text, general, or number ($) format3) The number of columns may vary depending on which PR report is being worked4) For the sake of simplicity - we can assume that the column titles will always be across row 15) Each employee name on this report may repeat several times depending on how many weeks they worked,so the SUM() formula should adjust automatically to capture all the rows of data to add up for each employee
HERE IS MY SPREADSHEET:
texttexttexttexttextformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 CSDINNECage Nick2581/7/1281$ 600.00 CSDINNECage Nick2581/16/12245$ 25.00 CSDINNECage Nick2581/23/12323$ 25.00 CSDINWPolly Cracker1781/7/12856$ 60.00 CSDINWPolly Cracker1781/16/12242$ 654.00 ARVIPWPolly Cracker1781/23/12322$ 2.00 ARVIPWPolly Cracker1781/28/12161$ 5.00 ARVIPWPolly Cracker1782/6/1284$ 3.00 CSDINSEDim Sum6871/7/1284$ 65.00 CSDINSEDim Sum6871/16/12126$ 5.00
HERE IS MY CODE TO INSERT 1 ROW
Sub InsertRowAtNewNameONE()Dim LR As Long, i As LongLR = Range("C" & Rows.Count).End(xlUp).RowFor i = LR To 2 Step -1If Range("C" & i).Value Range("C" & i - 1).Value Then Rows(i).InsertNext iEnd Sub
NOTE: See below: I will format and add formulas where I need on the 1st blank row that was createdand I need a code that will copy this particular row to all blank rows to the last.
recordtexttexttexttextcountformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 2201.5$ 300.00
View 5 Replies
View Related
Jul 25, 2013
I have a spreadsheet which is used by users unfamiliar with Excel. They are using the filter to select records, however when this is used some records appear which have no entry in the cells of that column. Can I overcome this? There is no data in the blank cells, other than a data validation drop down.
View 1 Replies
View Related
Jul 7, 2008
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies
View Related
Aug 2, 2014
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies
View Related
Aug 12, 2014
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
View 5 Replies
View Related
Mar 12, 2014
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies
View Related
Mar 22, 2014
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
View 10 Replies
View Related
Feb 27, 2013
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
View 2 Replies
View Related
